GB/T 4127.16-2025 English PDFUS$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4127.16-2025: Bonded abrasive products - Dimensions - Part 16: Cutting-off wheels on hand held power tools Status: Valid GB/T 4127.16: Historical versions
Basic dataStandard ID: GB/T 4127.16-2025 (GB/T4127.16-2025)Description (Translated English): Bonded abrasive products - Dimensions - Part 16: Cutting-off wheels on hand held power tools Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J43 Classification of International Standard: 25.100.70 Word Count Estimation: 10,132 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 4127.16-2007 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 4127.16-2025: Bonded abrasive products - Dimensions - Part 16: Cutting-off wheels on hand held power tools---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT4127.16-2025 ICS 25.100.70 CCSJ43 National Standard of the People's Republic of China Replaces GB/T 4127.16-2007 Dimensions of bonded abrasives Part 16.Handheld Cutting wheels for power tools handheld power tools Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 16 of GB/T 4127 “Dimensions of bonded abrasives”. GB/T 4127 has been published in the following parts. --- Part 1.Cylindrical grinding wheels (workpiece clamped between centers); --- Part 2.Centerless external cylindrical grinding wheels; --- Part 3.Internal grinding wheels; --- Part 4.Peripheral grinding wheels for surface grinding; --- Part 5.End grinding wheels for surface grinding; --- Part 6.Grinding wheels for tool grinding and tool room use; --- Part 7.Manually operated grinding wheels; --- Part 8.Grinding wheels for deburring, rough grinding and rough grinding; --- Part 9.Heavy-duty grinding wheels; --- Part 10.Honing and superfinishing grinding stones; --- Part 11.Hand-held polishing stones; --- Part 12.Deburring and roughening wheels for straight grinders; --- Part 13.Deburring and roughening wheels for vertical grinding machines; --- Part 14.Deburring, roughing and grinding wheels for angle grinders; --- Part 15.Cutting wheels for fixed or mobile cutting machines; --- Part 16.Cutting wheels for hand-held power tools; --- Part 17.Grinding points with handle; --- Part 18.Grinding wheels for flat glass edging. This document replaces GB/T 4127.16-2007 "Bonded abrasive tools - Dimensions - Part 16.Cutting wheels for hand-held power tools". Compared with GB/T 4127.16-2007, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The dimensions of the flat cutting wheel (type 41) have been changed (see 4.1, 3.1 of the.2007 edition); b) The dimensions of the cymbal-shaped cutting wheel (type 42) have been changed (see 4.2, 3.2 of the.2007 edition); c) Deleted the requirements (see Chapter 5 of the.2007 edition). This document is modified to adopt ISO 603-16.2022 "Bonded abrasive tools — Dimensions — Part 16.Cut-off wheels for hand-held power tools". The technical differences between this document and ISO 603-16.2022 and their reasons are as follows. --- ISO 525 (see Chapter 4) has been replaced by the normative reference GB/T 2484 to adapt to my country's technical conditions; --- Added the size series of flat cutting wheels (type 41) (see 4.1) to conform to the actual situation in my country; --- Added the size series of cymbal-shaped cutting wheels (type 42) (see 4.2) to conform to my country's actual situation. The following editorial changes have been made to this document. --- Deleted the imperial size representation of the outside diameter in the international standard; --- Deleted the note in 4.2 of the international standard; --- Deleted references to international standards. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Abrasives and Grinding Tools (SAC/TC139). This document was drafted by. Zhengzhou Abrasives and Grinding Tools Research Institute Co., Ltd., Yangquan Zhongjia Abrasives and Grinding Tools Co., Ltd., Guangdong Chuanghui Co., Ltd., Zhejiang Baima Grinding Wheel Co., Ltd., China Machinery Industry International Cooperation Co., Ltd., Dongguan Jinliwei Abrasives and Grinding Tools Co., Ltd. company. The main drafters of this document are. Zhong Yanzheng, Zhang Liang, Xu Bangping, Liu Jianhua, Ma Zhenchao, Li Na, Chen Xinqiang, and Yu Jiayin. This document was first published in 1984; first revised in.1997; and published in parts during the second revision in.2007. GB/T 4127.16-2007 "Bonded abrasive tools - Dimensions - Part 16.Cutting wheels for hand-held power tools" Revision.introductionIn order to facilitate the production, trade, application and technical exchange of bonded abrasives and make rational use of resources, it is necessary to establish a standardized bonded abrasive tool scale. Bonded abrasives have various shapes and uses. Products with the same shape may have different uses, and products with the same use may also have different With the development of bonded abrasives industry, the advancement of technology and the change of market demand, its shapes and uses are constantly enriched, and its size is constantly increasing. The size system of bonded abrasive tools is becoming increasingly large, and it is becoming increasingly difficult to establish a size system of bonded abrasive tools through a single standard, which is no longer realistic. Since.1999, ISO /TC29/SC5 has established a new bonded abrasive tool size system through scientific and reasonable classification and released ISO 603 series standards. GB/T 4127 "Dimensions of bonded abrasives" has adopted ISO 603 series standards since its second revision. Partial composition. --- Part 1.External cylindrical grinding wheels (workpiece clamped between centers). The purpose is to specify external cylindrical grinding wheels (workpiece clamped between centers) Common nominal sizes. --- Part 2.Centerless external cylindrical grinding wheels. The purpose is to specify the commonly used nominal dimensions of centerless external cylindrical grinding wheels. --- Part 3.Internal grinding wheels. The purpose is to specify the commonly used nominal sizes of internal grinding wheels. --- Part 4.Peripheral grinding wheels for surface grinding. The purpose is to specify the commonly used nominal sizes of peripheral grinding wheels for surface grinding. --- Part 5.End grinding wheels for surface grinding. The purpose is to specify the commonly used nominal dimensions of end grinding wheels for surface grinding. --- Part 6.Grinding wheels for tool grinding and tool room use. The purpose is to specify the commonly used nominal sizes of grinding wheels for tool grinding and tool room use. --- Part 7.Manually operated grinding wheels. The purpose is to specify the commonly used nominal sizes of manually operated grinding wheels. --- Part 8.Grinding wheels for deburring, roughing and rough grinding. The purpose is to specify the common nominal size. --- Part 9.Heavy-duty grinding wheels. The purpose is to specify the commonly used nominal sizes of heavy-duty grinding wheels. --- Part 10.Honing and superfinishing grinding stones. The purpose is to specify the commonly used nominal sizes of honing and superfinishing grinding stones. --- Part 11.Hand-held polishing stones. The purpose is to specify the commonly used nominal sizes of hand-held polishing stones. --- Part 12.Deburring and roughening wheels for straight grinding machines. The purpose is to specify deburring and roughening wheels for straight grinding machines Common nominal sizes. --- Part 13.Deburring and roughening wheels for vertical grinding machines. The purpose is to specify deburring and roughening wheels for vertical grinding machines Common nominal sizes. --- Part 14.Deburring, roughing and grinding wheels for angle grinders. The purpose is to specify the deburring, roughing and grinding wheels for angle grinders. Common nominal sizes for rough and coarse grinding wheels. --- Part 15.Cutting wheels for fixed or mobile cutting machines. The purpose is to specify the cutting wheels for fixed or mobile cutting machines. Common nominal sizes of grinding wheels. --- Part 16.Cutting wheels for hand-held power tools. The purpose is to specify the commonly used specifications for cutting wheels for hand-held power tools. Weigh the size. --- Part 17.Mounted grinding points. The purpose is to specify the commonly used nominal sizes of mounted grinding points. --- Part 18.Grinding wheels for flat glass edging. The purpose is to specify the commonly used nominal sizes of grinding wheels for flat glass edging. Dimensions of bonded abrasives - Part 16.Handheld Cutting wheels for power tools1 ScopeThis document specifies the commonly used nominal sizes and designations of the following bonded abrasive tools, in millimeters. ---Type 41.flat cutting wheel; ---Type 42.Cymbal-shaped cutting wheel. The bonded abrasives specified in this document are suitable for use in cutting any workpiece using a hand-held power tool. In this application, the workpiece is fixed Yes, hand-held power tools are controlled by an operator.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2484 Bonded abrasive tools - Shapes, types, markings and designations (GB/T 2484-2023, ISO 525.2020, MOD)3 Terms and DefinitionsThere are no terms or definitions that require definition in this document.4 Shape and size4.1 Type 41.Flat cutting wheel The shape of the flat cutting wheel corresponds to type 41 of GB/T 2484, see Figure 1.The size symbols in Figure 1 conform to the Regulation. Table 1 gives the commonly used sizes. Figure 1 41 type grinding wheel ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4127.16-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 4127.16-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4127.16-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4127.16-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4127.16-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4127.16-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
