GB/T 40481-2021 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 40481-2021: Dimensions and performance requirements of general-purpose slip sheet pallets for through transit of goods Status: Valid
Basic dataStandard ID: GB/T 40481-2021 (GB/T40481-2021)Description (Translated English): Dimensions and performance requirements of general-purpose slip sheet pallets for through transit of goods Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A85 Word Count Estimation: 14,160 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 40481-2021: Dimensions and performance requirements of general-purpose slip sheet pallets for through transit of goods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Dimensions and performance requirements of general-purpose slip sheet pallets for through transit of goods ICS 55.180.20 CCSA85 National Standards of People's Republic of China The size and performance requirements of intermodal skateboard pallets (ISO 12776.2008, Palets-Slipsheets, MOD) Released on 2021-08-20 2022-03-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee Table of contentsForeword Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Composition and name 2 5 Structure, material code and loading quality 3 6 Material 6 7 size 6 8 Performance requirements 7 9 Test 7 Appendix A (informative) Structural changes of this document compared with ISO 12776.2008 10 Reference 11ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document uses the redrafting method to modify and adopt ISO 12776.2008 "Pallet Skateboard Pallet". Compared with ISO 12776.2008, this document has many adjustments in structure. This document and ISO 12776 are listed in Appendix A. The.2008 chapter number change comparison list. The technical differences between this document and ISO 12776.2008 and the reasons are as follows. ---Regarding normative reference documents, this document has made adjustments with technical differences to adapt to my country's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Replace ISO 6780 (see 7.1) with GB/T 2934 modified to adopt international standards; ● Replace ISO 1924-2 (see 9.2.1.1) with GB/T 12914 modified to adopt international standards; ● Replace ISO 3676 with GB/T 15233 modified to adopt international standards (see 7.1); ● Replace ISO 527-1 (see 9.2.1.1) with GB/T 1040.1 equivalent to the international standard; ● Replace ISO 445.1996 with GB/T 3716-2000 equivalent to the international standard (see 3.2, 3.3, 3.4, 3.5, 3.13); ● Added reference to GB/T 6544 (see 6.1.1); ● Added reference to GB/T 10006 (see 9.2.4); ● Added reference to GB/T 22895 (see 9.2.4). ---Regarding terms and definitions, this document has made adjustments with technical differences to meet the requirements of this document, and the adjustments are concentrated Reflected in Chapter 3 "Terms and Definitions", the specific adjustments are as follows. ● Deleted the term "depth"; ● Deleted the term "corrugated cardboard"; ● Deleted the term "disposable skateboard tray"; ● Deleted the term "frontal width"; ● Deleted the term "length"; ● Deleted the term "laminated wing panel"; ● Deleted the term "nominal size"; ● Deleted the term "width"; ● Deleted the term "recyclable skateboard tray"; ● Deleted the term "repeated skateboard tray"; ● The terms and definitions of "basic size of skateboard tray" have been added (see 3.8). ---The 5.1.1 overview, 5.2.1 overview and 6.1.1 overview of ISO 12776.2008 have been deleted to comply with my country's national standards Require. ---The definition of corrugated board type in 6.1.2 of ISO 12776.2008 is deleted, and the corrugated board type is in GB/T 6544 There have been regulations, so I won't repeat them in this document. ---Added a note about the plane size of the unit cargo (see 7.1), which is conducive to choosing a suitable skateboard pallet plane size to adapt to different objects Flow packaging requirements. ---Increase the size and tolerance inspection method (see 9.1) to increase operability. ---Modified the tensile strength test method of the skateboard tray (see 9.2.1), which is conducive to obtaining stable and correct test results. ---The rigidity test method of the skateboard tray (see 9.2.2) and the friction characteristic test method (see 9.2.4) have been added, which is conducive to obtaining a stable positive Accurate test results. ---The 9th and 10th chapters of ISO 12776.2008 have been deleted, which adapts to the name and scope of this document. ---Added references. This document has made the following editorial changes. ---Revised the standard name to "Dimensions and Performance Requirements for Intermodal Skateboard Pallets"; ---The introduction of the international standard has been deleted. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed and managed by the National Logistics Standardization Technical Committee (SAC/TC269). Drafting organizations of this document. University of Science and Technology Beijing, Jiangyin Fenghui Packaging Co., Ltd., Xiamen Tongcheng Logistics Co., Ltd., Shenzhen China Inspection and Testing Co., Ltd., Shanghai Shuangzhong Packaging Material Co., Ltd., Tangshan Caofeidian District Baofeng Lingang Logistics Co., Ltd., Tangshan Caofeidian Yuantong International Trade Co., Ltd. Yi Co., Ltd., Anhui Fansheng Wood Packaging Co., Ltd., System Engineering Research Institute of the Academy of Military Sciences. The main drafters of this document. Tang Ying, Huang Lihua, Chen Zhiyong, Xu Kaibing, Zhang Zhongtian, Liu Chen, Chen Meng, Tan Zifan, Lu Shuihe, Liu Zhenhua, Wang Hui, Jiao Rang. The size and performance requirements of intermodal skateboard pallets1 ScopeThis document specifies the composition and name, structure, material code, loading quality, material, size, performance requirements and test. This document applies to the combination of products and goods into unit goods and the use of forklifts with push-pull devices for loading, unloading, transportation and storage The design, production, inspection and use of general-purpose skateboard pallets for intermodal transportation.2 Normative referencesThe content in the following documents provides normative references in the text and constitutes an indispensable clause of this document. Among them, all dated quotes Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable. Used in this document. GB/T 1040.1 Determination of tensile properties of plastics Part 1.General (GB/T 1040.1-2018, ISO 5227-1.2012, IDT) Main dimensions and tolerances of GB/T 2934 intermodal general flat pallets (GB/T 2934-2007, ISO 6780.2003, MOD) GB/T 3716-2000 Pallet Terminology (ISO 445.1996, IDT) GB/T 6544 corrugated cardboard GB/T 10006 Method for determination of friction coefficient of plastic film and sheet GB/T 12914 Determination of Tensile Strength of Paper and Paperboard Constant Speed Tensile Method (20mm/min) (GB/T 12914-2018, ISO 1924-2.2008, MOD) GB/T 15233 packing unit cargo size (GB/T 15233-2008, ISO 3676.1983, MOD) GB/T 22895 Determination of static and dynamic coefficient of friction of paper and paperboard by plane method3 Terms and definitionsThe following terms and definitions defined in GB/T 3716-2000 apply to this document. 3.1 Skateboard tray slipsheet A flat plate with wings on one or more sides, used for handling, stacking, storing or transporting goods or products in the form of unit loads Floor. 3.2 Loadsurface The part of the skateboard pallet that bears the unit cargo and product quality. [Source. GB/T 3716-2000, A2.1, with modification] 3.3 Wing tab The skateboard pallet extends beyond the size of the unit cargo, which is convenient for handling with a push-pull device with a gripper. [Source. GB/T 3716-2000, A2.3, with modification] ...... |
