GB/T 39582-2020 English PDF

US$2559.00 · In stock
Delivery: <= 12 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39582-2020: Test open data services (TODS)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39582-2020	2559	Add to Cart	12 days	Test open data services (TODS)	Valid

Similar standards

GB/T 40207   GB/T 40693   GB/T 40694.1   GB/T 45346   GB/T 17554.1   

Basic data

Standard ID: GB/T 39582-2020 (GB/T39582-2020)
Description (Translated English): Test open data services (TODS)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L70
Classification of International Standard: 35.020
Word Count Estimation: 126,133
Date of Issue: 2020-12-14
Date of Implementation: 2021-07-01
Regulation (derived from): National Standard Announcement No. 28 of 2020
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 39582-2020: Test open data services (TODS)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Pilot testing of open data services) ICS 35:020 L70 National Standards of People's Republic of China Pilot testing of open data services (ISO /PAS22720:2005, ASAM Opendataservices5:0, NEQ) 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Preface Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 1 3:1 Terms and definitions 1 3:2 Abbreviations 3 4 Overview 3 4:1 The relationship between TODS and ASAMODS 3 4:2 Objective 4 4:3 Value 4 4:4 Technical method 5 4:5 Data Model 6 4:6 Application Programming Interface 12 4:7 Transmission format 15 5 Architecture 16 5:1 Introduction 16 5:2 Elements of the base model 16 5:3 Application model rules 18 5:4 Attributes and relationships in the model 21 5:5 Data Type 24 5:6 Application Programming Interface 28 5:7 Inheritance mechanism 34 5:8 Other factors 36 6 Basic model 42 6:1 Introduction 42 6:2 Description of environmental elements 42 6:3 Description of management elements 45 6:4 Description of measurement and measurement data elements 48 6:5 Description of elements describing data 53 6:6 Element description of quantities and units 57 6:7 Description of test piece management 60 6:8 Description of device management 64 6:9 Description of security elements 66 6:10 Description of other elements 68 7 Transmission format 70 7:1 Overview 70 7:2 Transferring files 71 8 Application Programming Interface 102 8:1 Factory 102 8:2 Session 103 8:3 Model access 104 8:4 Instance access 107 8:5 Document Service 109 8:6 File access 110 8:7 File 112 8:8 Read and write file interface 114 8:9 Write file interface 114 8:10 Enumeration access 116 8:11 Enumeration 117 Appendix A (Normative Appendix) Execution Status (ErrorCode) 119 Appendix B (Normative Appendix) File Service Information (FSInfo) 121 Appendix C (Normative Appendix) Directory Information (DirInfo) 122

Foreword

This standard was drafted in accordance with the rules given in GB/T 1:1-2009: This standard uses the redrafting method with reference to ISO /PAS22720:2005 "ASAM Open Data Service 5:0": The consistency of ISO /PAS22720:2005 is not equivalent: This standard was proposed by China Machinery Industry Federation: This standard is under the jurisdiction of the National Automation System and Integration Standardization Technical Committee (SAC/TC159): Drafting organizations of this standard: Beijing Ruifeng Synergy Technology Co:, Ltd:, China National Institute of Standardization, Chengdu Aircraft Design Institute, China Hangfa Sichuan Gas Turbine Research Institute, Beijing Institute of Mechanical and Electrical Engineering, Beijing Institute of Control and Electronic Technology, China Shipbuilding Industry Corporation The 724 Research Institute, China Aviation Development Shenyang Liming Aviation Engine Co:, Ltd:, Nanjing Electronic Equipment Research Institute, AVIC Engineering Integration Equipment Co:, Ltd:, Southwest Institute of Technology and Engineering, Beihang University: The main drafters of this standard: Zhang Chengsheng, Wang Ke, Nan Fuchun, Hong Xuechao, Hong Yan, Liu Jianfeng, Qiao Li, Liu Bin, Chen Haipeng, Liao Zhonghua, Wang Zhiqiang, Yue Gaofeng, Chen Chunlin, Wang Longyi, Liu Hong, Liu Zhaoxin, Li Shaohui, Yang Qinghai, Liu Shouhua, Liu Bing, Zhao Xingfu, Li Wenjie, Zhou Junhua:

Introduction

There are various testing, evaluation and simulation solutions in the automotive, aviation, aerospace, construction, and electronics industries, and they all have their own independent management systems: The special format of system and data storage, and the method of information maintenance are also different: As the complexity of product innovation increases, expand and modify this These solutions and their integration with third-party systems are becoming increasingly challenging: At the same time, because the information description is different and difficult With access, data mining and interdisciplinary collaborative innovation based on a unified knowledge base cannot be realized, and it is difficult to apply new technologies and new methods to existing ones: In some systems, there is an urgent need for a simple and standardized information access method: Access to product life cycle information also requires standards Supported by standardized methods to deal with the risks caused by software tools and business discontinuities: ISO /PAS22720:2005 is the Open Data Service (ODS) proposed by the Association for Standardization of Automation and Measurement Systems (ASAM): The ODS standard has been widely used internationally: By standardizing the data model, interface, data exchange syntax and format, it can be used for different The application environment provides the same data frame to solve the problem of data exchange and sharing: In:2009, ASAM released a new version of the ODS5:2 standard: The domestic demand for data exchange and sharing in the test field is also very urgent: Therefore, in combination with the new version of the ODS standard and domestic demand, ISO /PAS22720:2005 is revised, and with reference to ASAM ODS5:2, Advanced Test Open Data Service (TODS) dedicated to test data: Through the expansion of ISO /PAS22720:2005, TODS can meet the sustainability requirements of test information preservation and acquisition, reducing Low project costs and risks, and provide a reliable data sharing and exchange standard for information systems: By using standardized interfaces And standard data structure can reduce the difficulty of system integration in heterogeneous environment and significantly improve the efficiency of information exchange: Pilot testing of open data services

1 Scope

This standard provides the architecture, basic model, transmission format and application programming interface of the open data service for testing and testing: This standard is applicable to the construction of test data management system, including test data collection, storage, management, analysis, exchange and sharing, data application Wait:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: ISO 8601:2004 Data elements and exchange format information exchange date and time representation (Dataelementsandinter- changeformats-Informationinterchange-Representationofdatesandtimes) IEEE754 binary floating-point arithmetic standard (IEEEstandardforbinaryfloating-pointarithmetic) 3 Terms, definitions and abbreviations 3:1 Terms and definitions The following terms and definitions apply to this document: 3:1:1 Basemodel A holistic, application-independent logical data model: Note: The model defines the structure of the test data managed in the TODS context, the basic elements of the test data, and the relationship between the basic elements: it It consists of a set of pre-defined basic elements and a set of rules that these elements should obey: 3:1:2 Applicationmodel In order to realize the test and test open data service, the TODS basic model is extended to meet the specific requirements of the test information industry Model: Note: The derivation rules of the base model are required: It is composed of a collection of derived application elements, and each element is derived from a basic element: 3:1:3 Applicationprogramminginterface A computer system, database, or application for processing service requests for other computer programs, or processing and other computing Interface for machine program data exchange: 3:1:4 Transfer format ASAMtransferformatsextensiblemarkuplanguage XML transmission files based on XML schema files and extension rules: Note: Able to transmit the required structure and instance information, and store all this information in a standardized format: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39582-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39582-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 8 ~ 12 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39582-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39582-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.