GB/T 39543-2020 English PDFUS$364.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 39543-2020: Design and metrological characteristics of dial test indicators (lever type) Status: Valid
Basic dataStandard ID: GB/T 39543-2020 (GB/T39543-2020)Description (Translated English): Design and metrological characteristics of dial test indicators (lever type) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J42 Classification of International Standard: 17.040.30 Word Count Estimation: 19,168 Date of Issue: 2020-12-14 Date of Implementation: 2021-07-01 Quoted Standard: GB/T 24634-2009; ISO 14253-1; 1998; ISO 14253-2; ISO/IEC GUIDE 98-3; ISO/IEC GUIDE 99 Adopted Standard: ISO 9493-2010, IDT Regulation (derived from): National Standard Announcement No. 28 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard specifies the most important design and measurement characteristics of the lever indicator. GB/T 39543-2020: Design and metrological characteristics of dial test indicators (lever type)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(The design and measurement characteristics of the lever indicator) ICS 17:040:30 J42 National Standards of People's Republic of China The design and measurement characteristics of the lever indicator [ISO 9493:2010,GeometricalProductSpecifications(GPS)- 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsPreface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Design features 1 4:1 Overall design characteristics 1 4:2 Type 2 4:3 Name 3 4:4 Dovetail Installation 3 4:5 Dials and hands 4 4:6 Styli 4 4:7 Zero adjustment 5 4:8 Design characteristics (manufacturer specifications) 5 5 Metrological characteristics 6 5:1 Maximum allowable error (MPE) and maximum allowable limit (MPL) of some measurement characteristics 6 5:2 Styli 6 5:3 Measuring force 6 6 Verification of compliance with specifications 6 6:1 Overview 6 6:2 Measurement standards for calibration of metrological characteristics 6 7 Sign 7 Appendix A (informative appendix) schematic diagram of indication error 8 Appendix B (Informative Appendix) Data Example of Leverage Instruction Table Table 10 Appendix C (informative appendix) Calibration of metrological characteristics 11 Appendix D (informative appendix) Instructions for use 13 Appendix E (Informative Appendix) Relationship with GPS Matrix Model 15 Reference 16ForewordThis standard was drafted in accordance with the rules given in GB/T 1:1-2009: The translation method used in this standard is equivalent to ISO 9493:2010 "Technical Specification for Product Geometrical Quantity (GPS) Length Measuring Instrument Lever" Design and measurement characteristics of indicator meters: The Chinese documents that have a consistent correspondence with the international documents cited in this standard are as follows: ---GB/T 18779:1-2002 Product Geometrical Quantity Technical Specification (GPS) Part 1 of Measurement and Inspection of Workpiece and Measuring Equipment Points: According to the rules for determining qualified or unqualified inspections (eqvISO 14253-1:1998); ---GB/T 18779:2-2004 Product Geometrical Technical Specification (GPS) Measurement and Inspection of Workpieces and Measuring Equipment Part 2 Points: Guidelines for the Evaluation of Uncertainty of GPS Measurement in Measuring Equipment Calibration and Product Inspection (ISO /T S14253-2:1999, IDT); ---GB/T 27418-2017 Measurement Uncertainty Evaluation and Expression (ISO /IEC Guide98-3:2008, MOD): This standard has made the following editorial changes: ---Modified the standard name: This standard was proposed by China Machinery Industry Federation: This standard is under the jurisdiction of the National Standardization Technical Committee for Measuring Instruments (SAC/TC132): Drafting organizations of this standard: Guilin Guanglu Digital Measurement and Control Co:, Ltd:, Chengdu Tool Research Institute Co:, Ltd:, Guilin Measuring Tool and Blade has limited liability Company, Chengdu Xincheng Measuring Tool Co:, Ltd:, Weihai Measuring Tool Factory Co:, Ltd:, Hanzhong Wanmu Instrument and Electric Co:, Ltd:, Jingjiang Measuring Tool Co:, Ltd: Division, Dongguan Tema Electronics Co:, Ltd:, Liaoning Institute of Metrology, China Jiliang University: The main drafters of this standard: Dong Zhongxin, Yan Liexue, Xu Gang, Zhao Weirong, Huang Longrong, Che Zhaoping, Zhao Geng, Wu Yufei, Wang Zhaojin, Chen Shanshan, He Yixian, Zhao Jun, Huang Guiyun: The design and measurement characteristics of the lever indicator1 ScopeThis standard specifies the most important design and measurement characteristics of the lever indicator:2 Normative referencesThe following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 24634-2009 Product Geometric Technical Specification (GPS) General concepts and requirements for GPS measuring equipment (ISO 14978: 2006, IDT) ISO 14253-1:1998 Product Geometrical Technical Specification (GPS) Measurement and Inspection of Workpieces and Measuring Equipment Part 1: According to Regulations The rules for determining qualified or unqualified inspections [GeometricalProductSpecifications(GPS)-Inspectionbymeasure- mentofworkpiecesandmeasuringequipment-Part 1:Decisionrulesforprovingconformanceornon- conformancewithspecifications] ISO 14253-2 Product Geometrical Quantity Technical Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Measuring Equipment Calibration Guidelines for the Uncertainty Evaluation of GPS Measurements in Product Inspection [GeometricalProductSpecifications (GPS)- Inspectionbymeasurementofworkpiecesandmeasuringequipment-Part 2:Guidetotheestimation ofuncertaintyinGPSmeasurement,incalibrationofmeasuringequipmentandinproductverification] ISO /IEC Guide98-3 Measurement Uncertainty Part 3: Guidelines for Expression of Measurement Uncertainty (GUM:1995) [Uncertaintyofmeasurement-Part 3:Guidetotheexpressionofuncertaintyin measurement (GUM:1995)] ISO /IEC Guide99 Common concepts and related terms (VIM) [Internationalvocabu- laryofmetrology-Basicandgeneralconceptsandassociatedterms(VIM)]3 Terms and definitionsThe following terms and definitions defined by GB/T 24634, ISO 14253-1, ISO 14253-2, ISO /IEC Guide99 and the following apply to this document: 3:1 Leverage indicator table dialtestindicators(levertype) The mechanical transmission system is used to convert the swing displacement of the lever probe into the angular displacement of the pointer on the dial, and the dial is used to measure the readings: Measuring appliances:4 Design features4:1 Overall design characteristics 4:1:1 The overall design and manufacturing process of the lever indicator should be able to ensure that the measurement characteristics of the lever indicator in various operating directions are consistent with The requirements of this standard: 4:1:2 Unless otherwise specified, the swing direction of the lever indicator stylus should be perpendicular to the stylus axis and in the same direction as the stylus swing direction: In the same plane, as shown in Figure D:1: If it is used at other angles, the displayed value should be corrected (see Appendix D): ...... |
