GB/T 39039-2020 English PDF

US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39039-2020: Evaluation method for hydrogen-induced delayed fracture of high strength steels
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39039-2020	339	Add to Cart	4 days	Evaluation method for hydrogen-induced delayed fracture of high strength steels	Valid

Similar standards

GB/T 40067   GB/T 40304   GB/T 39077   GB/T 18876.1   GB/T 13305   

Basic data

Standard ID: GB/T 39039-2020 (GB/T39039-2020)
Description (Translated English): Evaluation method for hydrogen-induced delayed fracture of high strength steels
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H24
Classification of International Standard: 77.040.99
Word Count Estimation: 18,120
Date of Issue: 2020-07-21
Date of Implementation: 2021-02-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 39039-2020: Evaluation method for hydrogen-induced delayed fracture of high strength steels

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Evaluation method for hydrogen-induced delayed fracture of high strength steels ICS 77.040.99 H24 National Standards of People's Republic of China Evaluation method of hydrogen induced delayed fracture of high strength steel (ISO 16573.2015, Steel-Measurementmethodfortheevaluationof 2020-07-21 released 2021-02-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Preface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Principle 2 5 Sample 3 6 Hydrogen charging 4 7 Plating 5 8 Tensile test 6 9 Sample handling after breaking 8 10 Hydrogen content measurement 9 11 Test report 9 Appendix A (informative appendix) The structural changes of this standard compared with ISO 16573.2015 10 Appendix B (informative appendix) Technical differences between this standard and ISO 16573.2015 and their reasons 12

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to amend and adopt ISO 16573.2015 "Steel High Strength Steel Hydrogen-induced Delayed Fracture Evaluation Method". Compared with ISO 16573.2015, this standard has structural adjustments. Appendix A lists the chapters of this standard and ISO 16573.2015. Article number comparison list. Compared with ISO 16573.2015, there are technical differences between this standard, and the clauses involved in these differences have been passed on the outer margins. The set vertical single line (|) is marked, and a list of the corresponding technical differences and their reasons is given in Appendix B. This standard has made the following editorial changes. ---Modified the standard name; ---References are deleted. This standard was proposed by the China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). Drafting organizations of this standard. Central Iron and Steel Research Institute, Jiangyin Xingcheng Special Steel Co., Ltd., Xiwang Metal Technology Co., Ltd., Shougang Group Co., Ltd., Beijing Jiaotong University, University of Science and Technology Beijing, Metallurgical Industry Information Standards Research Institute. The main drafters of this standard. Sun Ting, Wang Maoqiu, Han Yun, Huang Zhen, Liu Jinchi, Yan Chengming, Li Xiaoyuan, Hui Weijun, Li Jinxu, Zhang Jianfeng, Dong Jinlong. Evaluation method of hydrogen induced delayed fracture of high strength steel

1 Scope

This standard specifies the sample, hydrogen charging, constant load tensile test, and slow strain rate tensile test for the evaluation method of hydrogen-induced delayed fracture of high-strength steel. After inspection, sample processing after breaking, hydrogen content measurement, test report. This standard applies to high-strength steel with a tensile strength of not less than 800MPa. For high-strength steel with tensile strength lower than 800MPa, please refer to use.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 228.1 Tensile test of metallic materials Part 1.Room temperature test method (GB/T 228.1-2010, ISO 6892-1. 2009, MOD) GB/T 2975 Steel and steel product mechanical properties test sampling location and sample preparation (GB/T 2975-2018, ISO 377. 2017, MOD)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Diffusible hydrogen content The amount of hydrogen that can diffuse in the sample at room temperature. 3.2 Criticalhydrogencontent Under the specified stress (0.9 times the tensile strength or 0.9 times the notched tensile strength), the delayed fracture just does not occur after the specified time When, the content of diffusible hydrogen in the sample. 3.3 Notch tensile strength notchtensilestrength; NTS The ratio of the maximum force during the tensile test of a notched specimen to the original cross-sectional area at the notch. 3.4 Fracture stress ratio The ratio of the tensile strength (or notched tensile strength) of the hydrogen-charged sample to the tensile strength (or notched tensile strength) of the uncharged sample. 3.5 Constant load tensile test constant load tensile test; CLT A tensile test method in which the tensile load of the specimen is constant. 3.6 Slow strain rate tensile test slowstrainratetensiletest; SSRT A tensile test method in which the tensile strain rate of the specimen is generally lower than 10-5/s. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39039-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39039-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39039-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39039-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.