GB/T 3883.209-2021 English PDF

US$344.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3883.209-2021: Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3883.209-2021	344	Add to Cart	4 days	Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders	Valid

Similar standards

GB/T 4343.2   GB/T 3883.311   GB/T 3787   GB/T 3883.217   GB/T 3883.208   GB/T 3883.215   

Basic data

Standard ID: GB/T 3883.209-2021 (GB/T3883.209-2021)
Description (Translated English): Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K64
Word Count Estimation: 18,154
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 3883.209-2021: Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety of motor-operated hand-held, transportable and garden tools-Part 209.Particular requirements for hand-held tappers and threaders ICS 25.140.20 CCSK64 National Standards of People's Republic of China Replace GB/T 3883.9-2012 Safety of hand-held and portable electric tools and garden tools Part 209.Hand-held tapping machine and pipe threading machine Dedicated requirements (IEC 62841-2-9.2015, Electricmotor-operatedhand-heldtools, transportable Released on 2021-04-30 and implemented on 2021-11-01 State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 General requirements 1 5 Test general conditions 1 6 Radiation, toxicity and similar hazards 2 7 Category 2 8 Signs and instructions 2 9 Protection against touching live parts 2 10 Start 2 11 Input power and current 3 12 Fever 3 13 Heat resistance and flame resistance 3 14 Moisture resistance 4 15 Rust prevention 4 16 Overload protection of transformers and related circuits 4 17 Durability 4 18 Abnormal operation 4 19 Mechanical hazards 4 20 Mechanical strength 4 21 Structure 5 22 Internal wiring 5 23 Components 5 24 Power connection and external flexible cord 5 25 Terminal 6 for external wire 26 Grounding device 6 27 Screws and connectors 6 28 Creepage distance, electrical clearance and insulation penetration distance 6 Appendix 8 Appendix I (Informative) Measurement of Noise and Vibration 9 Appendix K (Normative) Battery-powered tools and battery packs 11 Reference 12

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is part 209 of GB/T 3883 "Safety of Handheld and Portable Electric Tools and Garden Tools". "Handheld, removable Hand-held power tools in Part 2 of "Safety of Portable Power Tools and Garden Tools", currently consists of the following 7 parts. ---GB/T 3883.201-2017 Safety of hand-held and portable electric tools and garden tools Part 2.Electric drills and impact Special requirements for electric drills; ---GB/T 3883.202-2019 Safety of hand-held and portable electric tools and garden tools Part 202.Hand-held screws Special requirements for wire cutters and impact wrenches; ---GB/T 3883.204-2019 The safety of hand-held, portable electric tools and garden tools Part 204.Hand-held non- Special requirements for disc sander and polishing machine; ---GB/T 3883.205-2019 Safety of hand-held and portable electric tools and garden tools Part 205.Hand-held circular Special requirements for saws; Special requirements for threading machine and pipe threading machine; ---GB/T 3883.210-2019 Safety of hand-held and portable electric tools and garden tools Part 210.Hand-held electric tools Special requirements for planing; ---GB/T 3883.211-2021 Safety of hand-held, portable electric tools and garden tools Part 211.Hand-held Special requirements for double sawing. This document replaces GB/T 3883.9-2012 "Safety of hand-held electric tools Part 2.Special requirements for tapping machines", Compared with GB/T 3883.9-2012, the main technical changes are as follows. 1) Scope. add pipe threader (see Chapter 1, Chapter 1 of.2012 edition); 2) Normative references. add ISO standards (see Chapter 2, Chapter 2 of the.2012 edition); 3) Terms and definitions. add pipe threader (see Chapter 3, Chapter 3 of the.2012 edition); 4) Test general conditions. add the description of the quality of the tapping machine and the threading machine (see Chapter 5, Chapter 5 of the.2012 edition); 5) Marks and instructions. 8.1 increase the requirements of pipe threading machines; increase the relevant requirements of 8.14.1, 8.14.1.101, 8.14.2a) and 8.14.2b) Seek (see Chapter 8, Chapter 8 of the.2012 edition); 6) Input power and current. increase the relevant requirements for pipe threading machines (see Chapter 11, Chapter 11 of the.2012 edition); 7) Fever. The original 12.4 was moved to 12.2.1, and the requirements for the pipe threader were added; 12.5 was added (see Chapter 12, Chapter 12 of the.2012 edition); 8) Abnormal operation. Modify Table 4 of Part 1 (see Chapter 18, Chapter 18 of the.2012 edition); 9) Mechanical strength. increase the support device for the pipe threader (see Chapter 20, Chapter 20 of the.2012 edition); 10) Structure. increase 21.18.1.1; increase the requirements for pipe threading machines (see Chapter 21, Chapter 21 of the.2012 edition); 11) Components. modify the requirements for the power switch of the pipe threader (see Chapter 23, Chapter 23 of the.2012 edition); 12) Power connection and external flexible cord. increase the requirements for the use of rubber insulated cables (see Chapter 24, Chapter 24 of the.2012 edition); 13) Add an informative appendix "Measurement of Noise and Vibration" (see Appendix I); 14) Appendix K. Revise Table 4 of Special Requirements. The translation method used in this document is equivalent to the IEC 62841-2-9.2015 "Electric Motor Driven Handheld and Portable Electric Tools and Garden Machines" Safety Part 2-9.Particular Requirements for Hand-held Tapping Machines and Threading Machines". This document has made the following editorial changes. ---The name of the standard was revised to "Safety of hand-held and portable electric tools and garden tools. Part 209.Hand-held tapping machines and Special requirements for pipe threading machines"; ---Included the technical errata content of IEC 62841-2-9.2015/COR1.2015, and deleted Chapter 18 and Chapter K.18 in the original table 4 "Self-reset prevention required by 23.3" and the corresponding level, the outer margins of the clauses involved shall use vertical double lines (‖) Marked. This document shall be in accordance with GB/T 3883.1-2014 "Safety of Handheld and Portable Electric Tools and Garden Tools Part 1.General Requirements" Seek to be used together. The "applicable" part of this document indicates that the corresponding provisions in GB/T 3883.1-2014 are applicable; this document specifies the "replacement" part, The provisions in this document shall prevail; the part in this document that states "modification" indicates the relevant provisions of GB/T 3883.1-2014 The content should be based on the revised content of this document, and the other content in this clause still applies; In addition to complying with the corresponding provisions of GB/T 3883.1-2014, it should also comply with the additional provisions of this document. This document was proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Electric Tool Standardization Technical Committee (SAC/TC68). Drafting organizations of this document. Zhengyang Technology Co., Ltd., Shanghai Electric Tool Research Institute (Group) Co., Ltd., Jiangsu Dongcheng Electric Industrial Co., Ltd. Tools Co., Ltd., Jiangsu SUMEC Hardware Tools Co., Ltd., Ruiqi Holdings Co., Ltd. The main drafters of this document. Xu Feihao, Gu Jing, Gu Jiacheng, Lin Youyu, Zhu Xianbo, Yuan Guisheng, Yin Haixia. The previous versions of the documents replaced by this document are as follows. ---GB 3883.9-1985, GB 3883.9-1991, GB 3883.9-2005, GB/T 3883.9-2012.

Introduction

In.2014, my country issued the national standard GB/T 3883.1-2014 ``Safety No. of Handheld and Portable Power Tools and Garden Tools'' Part 1.General Requirements, the original GB/T 3883 (part of hand-held power tools), GB/T 13960 (part of portable power tools) and The common technical requirements of the general safety standards for the three major series of electric tools in GB/T 4706 (only for garden power tools) have been integrated. There are 3 parts in the special requirements for specific types of small products that are used in conjunction with GB/T 3883.1-2014. Portable power tools part), part 3 (portable power tools part), and part 4 (garden power tools part), all transform the corresponding country The specific requirements of the international standard IEC 62841 series. The main element of the standard name is expanded to "safety of hand-held, portable power tools and garden tools", and the original hand-held power tools are used Part of the standard number GB/T 3883.The standard sub-part number of each sub-category product consists of three digits, of which the first digit Indicates the corresponding part, the 2nd and 3rd digits indicate different subcategories. The new version of the GB/T 3883 series of standards will form a more scientific, complete, universal, and unified series of safety standards for electric tool products The system makes the implementation of the standard more practical and convenient to use. At present, the new version of GB/T 3883 series standard "Handheld Power Tools Part" has published standards as follows. ---GB/T 3883.201-2017 Safety of hand-held and portable electric tools and garden tools Part 2.Electric drills and impact Special requirements for electric drills; ---GB/T 3883.202-2019 Safety of hand-held and portable electric tools and garden tools Part 202.Hand-held screws Special requirements for wire cutters and impact wrenches; ---GB/T 3883.204-2019 The safety of hand-held, portable electric tools and garden tools Part 204.Hand-held non- Special requirements for disc sander and polishing machine; ---GB/T 3883.205-2019 Safety of hand-held and portable electric tools and garden tools Part 205.Hand-held circular Special requirements for saws; Special requirements for threading machine and pipe threading machine; ---GB/T 3883.210-2019 Safety of hand-held and portable electric tools and garden tools Part 210.Hand-held electric tools Special requirements for planing; ---GB/T 3883.211-2021 Safety of hand-held, portable electric tools and garden tools Part 211.Hand-held Special requirements for double sawing. The following standards will be revised in the future. ---GB/T 3883.3-2007 The safety of hand-held electric tools Part 2.The specialization of grinders, polishing machines and disc sanders Use requirements; ---GB/T 3883.7-2012 Safety of hand-held electric tools Part 2.Special requirements for hammer tools; ---GB/T 3883.8-2012 Safety of hand-held electric tools Part 2.Special requirements for electric scissors and electric punching shears; ---GB/T 3883.12-2012 Safety of hand-held electric tools Part 2.Specific requirements for concrete vibrators; ---GB/T 3883.13-1992 Safety of hand-held electric tools Part 2.Special requirements for non-flammable liquid electric spray guns; ---GB/T 3883.16-2008 Safety of hand-held electric tools Part 2.Special requirements for nailing machines; ---GB/T 3883.17-2005 Safety of hand-held electric tools Part 2.Special requirements for wood milling and trimming machines; ---GB/T 3883.18-2009 Safety of hand-held electric tools Part 2.Special requirements for stone cutting machines; ---GB/T 3883.19-2012 Safety of hand-held electric tools Part 2.Special requirements for pipe dredging machines; ---GB/T 3883.20-2012 Safety of hand-held electric tools Part 2.Special requirements for strapping machines; ---GB/T 3883.21-2012 Safety of hand-held electric tools Part 2.Special requirements for band saws; ---GB/T 3883.22-2008 Safety of hand-held electric tools Part 2.Special requirements for slotting machines. Safety of hand-held and portable electric tools and garden tools Part 209.Hand-held tapping machine and pipe threading machine Dedicated requirements

1 Scope

In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies. increase. This document applies to hand-held tapping machines and pipe threading machines.

2 Normative references

In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies. increase. ISO 7-1.1994 Pipe threads sealed with threads-Part 1.Dimensions, tolerances and markings (Pipethreads where pressure- tightjointsaremadeonthethreads-Part 1.Dimensions, tolerancesanddesignation) ISO 65.1981 Carbon steel pipes (Carbonsteeltubessuitableforscrewinginac- cordancewithISO 7-1)

3 Terms and definitions

In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies. increase. 3.101 Tapper Tools for cutting internal threads. 3.102 Threader Tools for cutting external threads.

4 General requirements

This chapter of GB/T 3883.1-2014 is applicable.

5 Test general conditions

In addition to the following provisions, this chapter of GB/T 3883.1-2014 applies. 5.17 Added. If there is an auxiliary handle, the quality of the tapping machine/pipe threading machine should include it. Any support device of the pipe threader as shown in Figure 101 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3883.209-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3883.209-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3883.209-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3883.209-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.