GB/T 3883.215-2022_English: PDF (GB/T3883.215-2022)
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| GB/T 3883.215-2022 | 384 |
Add to Cart
|
4 days
|
Safety of motor-operated hand-held, transportable and garden tools - Part 215: Particular requirements for hand-held mixers
| Valid |
| Standard ID | GB/T 3883.215-2022 (GB/T3883.215-2022) | | Description (Translated English) | Safety of motor-operated hand-held, transportable and garden tools - Part 215: Particular requirements for hand-held mixers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K64 | | Classification of International Standard | 25.140.20 | | Word Count Estimation | 21,215 | | Date of Issue | 2022-10-12 | | Date of Implementation | 2023-05-01 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee |
GB/T 3883.215-2022
Safety of motor-operated hand-held, transportable and garden tools - Part 215.Particular requirements for hand-held mixers
ICS 25.140.20
CCSK64
National Standards of People's Republic of China
Safety of Handheld, Portable Power Tools and Garden Tools
Part 215.Particular requirements for hand-held mixers
(IEC 62841-2-10.2017, Electricmotor-operatedhand-heldtools,
Released on 2022-10-12
2023-05-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Range 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 1
5 General conditions of the test 1
6 Radiation, toxicity and similar hazards 2
7 categories 2
8 Signs and instructions 2
9 Protection against access to live parts 2
10 start 3
11 Input power and current 3
12 fever 3
13 Heat resistance and flame retardancy 3
14 Moisture resistance 3
15 Anti-rust 3
16 Overload protection of transformers and related circuits 3
17 Durability 3
18 Abnormal operation 3
19 Mechanical hazards 4
20 Mechanical strength 4
21 Structure 5
22 Internal wiring 5
23 components 5
24 Power connection and external flexible wire 5
25 Terminal 5 for external conductors
26 Grounding device 5
27 Screws and connectors 6
28 Creepage distances, clearances and insulation penetration distances 6
Appendix 9
Appendix I (Informative) Measurement of Noise and Vibration 10
Appendix K (Normative) Battery tools and battery packs 13
Reference 14
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is part 215 of GB/T 3883 "Safety of Handheld, Portable Power Tools and Garden Tools". GB/T 3883
---GB/T 3883.201-2017 Safety of Handheld, Portable Power Tools and Garden Tools Part 2.Electric Drills and Impacts
Special requirements for electric drills;
---GB/T 3883.202-2019 Safety of hand-held, portable power tools and garden tools Part 202.Hand-held screws
Particular requirements for wire cutters and impact wrenches;
---GB/T 3883.204-2019 Safety of hand-held, portable power tools and garden tools Part 204.Hand-held non-
Particular requirements for disc sanders and polishers;
---GB/T 3883.205-2019 Safety of hand-held, portable power tools and garden tools Part 205.Hand-held round
Particular requirements for saws;
---GB/T 3883.209-2021 Safety of hand-held, portable power tools and garden tools Part 209.Hand-held power tools
Special requirements for threading machines and threading machines;
---GB/T 3883.210-2019 Safety of Handheld, Portable Power Tools and Garden Tools Part 210.Handheld Power Tools
Specific requirements for planing;
---GB/T 3883.211-2021 Safety of hand-held, portable power tools and garden tools Part 211.Hand-held
Specific requirements for compound saws;
Specific requirements for mixers.
This document is equivalent to IEC 62841-2-10.2017 "Safety of electric motor-driven hand-held, portable power tools and garden machines
Part 2-10.Particular requirements for hand-held mixers".
The following minimal editorial changes have been made to this document.
--- The name of the standard was changed to "Safety of Hand-held, Portable Power Tools and Garden Tools Part 215.Hand-held blenders
Special Requirements".
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Electrical Equipment Industry Association.
This document is under the jurisdiction of the National Electric Tools Standardization Technical Committee (SAC/TC68).
This document is drafted by. Zhejiang Xinyuan Electric Manufacturing Co., Ltd., Shanghai Electric Tool Research Institute (Group) Co., Ltd., Zhejiang Bolaigong
Tools Co., Ltd., Jiangsu Dongcheng Electric Tools Co., Ltd., Zhejiang Ruiqi Tools Co., Ltd., Zhengyang Technology Co., Ltd., Baoshide Technology
(China) Co., Ltd., Jiangsu SUMEC Hardware Tools Co., Ltd.
The main drafters of this document. Jin Hongxia, Gu Jing, Chen Min, Shi Chunlei, Zhu Xianbo, Xu Feihao, Ding Yucai, Lin Youyu, Xu Litianhao.
introduction
This document is consistent with GB/T 3883.1-2014 "Safety of Handheld, Portable Power Tools and Garden Tools - Part 1.General Requirements"
use together.
The part marked "applicable" in this document indicates that the corresponding clauses in GB/T 3883.1-2014 are applicable; the part marked "replaced" in this document
In this document, the clauses in this document shall prevail; the part of this document that states "revised" means the relevant provisions of the corresponding clauses in GB/T 3883.1-2014.
The content is subject to the modified content of this document, while other contents in this clause are still applicable;
In addition to complying with the corresponding provisions of GB/T 3883.1-2014, it must also comply with the provisions added in this document.
In.2014, my country issued GB/T 3883.1-2014 "Safety of Handheld, Portable Power Tools and Garden Tools - Part 1.General
Use Requirements", the original GB/T 3883 (part of hand-held electric tools), GB/T 13960 (part of removable electric tools) and GB/T 4706
(Only for garden power tools) The common technical requirements of the general safety standards for the three series of power tools have been integrated.
The special requirements for specific types of small products used in conjunction with GB/T 3883.1-2014 have a total of 3 parts, which are respectively Part 2 (Manual
Handheld power tools), Part 3 (Mobile power tools), Part 4 (Garden power tools), all converted into corresponding
Particular requirements of the IEC 62841 series.
The main element of the standard name is expanded to "safety of hand-held, portable power tools and garden tools", and the original hand-held power tools are used
Part of the standard number GB/T 3883.The standard sub-section number of each sub-category product consists of three digits, the first digit of which is
Indicates the corresponding part, the 2nd and 3rd digits indicate different sub-category products.
The new version of GB/T 3883 series standards will form a relatively scientific, complete, general and unified safety series standards for electric tool products
The system makes the implementation of the standard more practical and easy to use.
At present, the published standards of the new version of GB/T 3883 series standards "Part of Handheld Power Tools" are as follows.
---GB/T 3883.201-2017 Safety of Handheld, Portable Power Tools and Garden Tools Part 2.Electric Drills and Impacts
Special requirements for electric drills. The purpose is to standardize the specific special safety requirements for electric drills and electric impact drills.
---GB/T 3883.202-2019 Safety of hand-held, portable power tools and garden tools Part 202.Hand-held screws
Particular requirements for wire cutters and impact wrenches. The purpose is to standardize the specific safety standards for hand-held screwdrivers and impact wrenches.
full request.
---GB/T 3883.204-2019 Safety of hand-held, portable power tools and garden tools Part 204.Hand-held non-
Particular requirements for disc sanders and polishers. The purpose is to standardize the characteristics of hand-held non-disc sanders and polishers
specific security requirements.
---GB/T 3883.205-2019 Safety of hand-held, portable power tools and garden tools Part 205.Hand-held round
Particular requirements for saws. The purpose is to standardize the specific dedicated safety requirements for the small category of hand-held circular saws.
---GB/T 3883.209-2021 Safety of hand-held, portable power tools and garden tools Part 209.Hand-held power tools
Special requirements for threading machines and threading machines. The purpose is to standardize the specific special security for small products of hand-held tapping machines and threading machines
Require.
---GB/T 3883.210-2019 Safety of Handheld, Portable Power Tools and Garden Tools Part 210.Handheld Power Tools
Specific requirements for planing. The purpose is to standardize the specific special safety requirements for small products of hand-held electric planers.
---GB/T 3883.211-2021 Safety of hand-held, portable power tools and garden tools Part 211.Hand-held
Special requirements for compound saws. The purpose is to standardize the specific special safety requirements for small products of hand-held reciprocating saws.
Specific requirements for mixers. The purpose is to standardize the specific dedicated safety requirements for the small category of hand blenders.
The following standards will also be revised in the future.
---GB/T 3883.3-2007 Safety of hand-held electric tools Part II. Special specifications for grinders, polishers and disc sanders
use requirements;
---GB/T 3883.7-2012 Safety of hand-held electric tools Part 2.Special requirements for hammer tools;
---GB/T 3883.8-2012 Safety of hand-held electric tools Part 2.Special requirements for electric scissors and electric punching shears;
---GB/T 3883.12-2012 Safety of hand-held electric tools Part 2.Special requirements for concrete vibrators;
---GB/T 3883.13-1992 Safety of hand-held electric tools Part II. Special requirements for non-flammable liquid electric spray guns;
---GB/T 3883.16-2008 Safety of hand-held electric tools Part II. Special requirements for nailing machines;
--- GB/T 3883.17-2005 Safety of hand-held electric tools Part 2.Special requirements for wood milling and trimming machines;
---GB/T 3883.18-2009 Safety of hand-held electric tools Part II. Special requirements for stone cutting machines;
---GB/T 3883.19-2012 Safety of hand-held electric tools Part 2.Special requirements for pipe dredgers;
---GB/T 3883.20-2012 Safety of ......
|