GB/T 38463-2020 English PDFUS$339.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 38463-2020: General specification for ultra-clean plastic bottle filling machine Status: Valid
Basic dataStandard ID: GB/T 38463-2020 (GB/T38463-2020)Description (Translated English): General specification for ultra-clean plastic bottle filling machine Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J83 Classification of International Standard: 55.200 Word Count Estimation: 18,189 Date of Issue: 2020-03-06 Date of Implementation: 2020-10-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 38463-2020: General specification for ultra-clean plastic bottle filling machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.General specification for ultra-clean plastic bottle filling machine ICS 55.200 J83 National Standards of People's Republic of China General technical requirements for ultra-clean plastic bottle filling equipment Released on 2020-03-06 2020-10-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some content of this document may involve patents. Publication of this document The institution does not assume responsibility for identifying these patents. This standard was proposed by the China National Machinery Industry Federation. This standard is under the jurisdiction of the National Food Packaging Machinery Standardization Technical Committee (SAC/TC494). This standard was drafted. Jiangsu Xinmeixing Packaging Machinery Co., Ltd., Hangzhou Zhongya Machinery Co., Ltd., Langfang Baiguan Packaging Machinery Co., Ltd., Nanjing Baolilong Packaging Machinery Co., Ltd., Guangzhou Tech-Long Packaging Machinery Co., Ltd., Hefei Zhongchen Light Industry Machinery Co., Ltd., Guangdong Yuedong Machinery Industrial Co., Ltd., Hangzhou Yongchuang Intelligent Equipment Co., Ltd., Krones Machinery (Taicang) Co., Ltd., Sidel Machinery (Beijing) Co., Ltd., Hefei General Electromechanical Products Testing Institute Co., Ltd., Pilz Industrial Automation (Shanghai) Co., Ltd., China Food Fermentation Industry Research Institute Co., Ltd., Coca-Cola Beverage (Shanghai) Co., Ltd., Hangzhou Wahaha Group Co., Ltd., Bright Milk Industry Co., Ltd., South China University of Technology, Shanghai Want Want Food Group Co., Ltd., Tianjin Otsuka Beverage Co., Ltd., Danone (China) Food Beverage Co., Ltd. Guangzhou Branch, Inner Mongolia Yili Industrial Group Co., Ltd., Xiamen Yinlu Food Group Co., Ltd., Xiamen Zerun Food Research Institute. The main drafters of this standard. He Deping, Shi Zheng, Du Zhenqing, Huang Dongning, Zhang Chongming, Cha Zhengwang, Li Yueyun, Luo Bangyi, Li Yan, Liu Yu, Chen Runjie, Huang Zhijiong, Zhang Guohong, Ji Yonglin, Gao Yulin, Chen Xiaoping, Song Junjie, Lin Ling, Huang Kaibiao, Chu Xingan, He Yuntao, Yin Gang, Zhou Qianghua, Ji Rong, Dianthus chinensis, Xu Qianqian, Wang Wei, Cai Linchang, Ye Hui, Shao Jinrong, Liu Xianghong, Tang Weiqiang, Yu Mingda, Pan Bo, Jin Guoxing, Xuelian, Yang Ning, Zhang Weize and Yu Jun. General technical requirements for ultra-clean plastic bottle filling equipment1 ScopeThis standard specifies the terms and definitions, models, types, and basics of ultra-clean plastic bottle filling equipment (hereinafter referred to as "ultra-clean filling machine") Parameters and working conditions, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage. This standard is applicable to polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), etc. using ultra-clean filling process Plastic bottle filling liquid (hereinafter referred to as "material"), filling equipment with plastic cap or film sealing.2 Normative referencesThe following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 191 Graphic mark for packaging, storage and transportation GB 2894 safety signs and guidelines for their use GB/T 4208-2017 enclosure protection level (IP code) GB 4789.2 National Food Safety Standard Determination of the total number of colonies in food microbiology inspection GB 5226.1-2008 Mechanical Electrical Safety Mechanical Electrical Equipment Part 1. General Technical Conditions GB 5749 Sanitary Standards for Drinking Water GB/T 5750.11-2006 Standard test method for drinking water disinfectant index GB/T 7311 Packaging machinery classification and model compilation method GB/T 7932 Pneumatic general rules and safety requirements for the system and its components GB/T 8196 General requirements for the design and manufacture of fixed and movable guards for mechanical safety guards GB/T 9969 General Instructions for Use of Industrial Products GB/T 13277.1-2008 Compressed air Part 1. Pollutant purification grade GB/T 13306 sign GB/T 13384 General technical requirements for packaging of electromechanical products GB/T 14253 General technical requirements for light industry machinery GB 15179 Food Machinery Grease GB/T 15706 General Rules for Safety Design of Machinery Risk Assessment and Risk Reduction GB/T 16273.1 Graphical symbols for equipment Part 1. General symbols GB/T 16292 Test method for suspended particles in clean rooms (areas) of the pharmaceutical industry GB/T 16754 Mechanical Safety Emergency Stop Design Principles GB 16798 Food Machinery Safety and Sanitation GB/T 16855.1 Safety related parts of machinery safety control system. Part 1. General rules for design GB/T 17876 Plastic anti-theft caps for packaging containers GB/T 17888.2 Safety of machinery entering the fixed installation of machinery. Part 2. Working platform and access GB/T 17888.3 Safety of machinery to enter the fixed facilities of machinery. Part 3. Stairs, stairs and guardrails GB/T 17888.4 Safety of machinery entering the fixed installation of machinery. Part 4. Fixed straight ladder GB/T 18153 Ergonomic data for determining the limit of hot surface temperature by mechanically safe contactable surface temperature ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38463-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 38463-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 38463-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38463-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
