GB/T 37331-2019 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37331-2019: Design guidelines for structure material of self-elevating drilling units
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37331-2019	279	Add to Cart	3 days	Design guidelines for structure material of self-elevating drilling units	Valid

Similar standards

JT/T 258   GB/T 37348   GB/T 37335   GB/T 37334   

Basic data

Standard ID: GB/T 37331-2019 (GB/T37331-2019)
Description (Translated English): Design guidelines for structure material of self-elevating drilling units
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U17
Classification of International Standard: 47.020.99
Word Count Estimation: 14,116
Date of Issue: 2019-03-25
Date of Implementation: 2019-10-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37331-2019: Design guidelines for structure material of self-elevating drilling units

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Design guidelines for structure material of self-elevating drilling units ICS 47.020.99 U17 National Standards of People's Republic of China Self-elevating drilling platform structural material design rules Published on.2019-03-25 2019-10-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Marine Ship Standardization Technical Committee (SAC/TC12). This standard was drafted. Dalian Shipbuilding Industry Group Co., Ltd., China Shipbuilding Industry Corporation 704 Institute. The main drafters of this standard. Wang Haijun, Liu Yingfang, Dai Ting, Zhang Ping, Zhang Zhanli, Chen Hansong, Li Haizhou, Li Jia. Self-elevating drilling platform structural material design rules

1 Scope

This standard specifies the design basis, main parameters determination principle and design of the self-elevating drilling platform (hereinafter referred to as "platform") structural materials. method. This standard is applicable to the design of structural materials for jack-up rigs. Other marine engineering structures and armored materials can be referenced. use.

2 Terms and definitions

The following terms and definitions apply to this document. 2.1 Special component specialapplicationstructure The main components at critical load transfer points and stress concentrations. 2.2 Main component primary applicationstructure A component that plays an important role in the overall integrity of the jack-up rig structure. 2.3 Secondary component secondaryapplicationstructure Non-essential components whose failure does not affect the overall integrity of the jack-up rig structure.

3 Design basis

The drawings and technical documents on which the structural materials are designed include. a) technical specifications of the contract; b) classification of classification society; c) the general layout; d) basic structure diagram; e) Structure classification map.

4 main parameters determination principle

4.1 Minimum design temperature of the structure 4.1.1 The minimum design temperature of the structure shall be in accordance with the requirements of the contract technical specification; if there is no such requirement, it is generally consistent with the service temperature of the platform. 4.1.2 The minimum design temperature of the underwater structure is generally 0 °C. 4.1.3 The minimum design temperature of the internal structure is generally assumed to be the same as the design temperature of the adjacent external structure, but the interior of the permanent heating compartment is knotted. The design temperature of the structure may not necessarily be lower than 0 °C. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37331-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37331-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37331-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37331-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.