GB/T 37274-2018 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37274-2018: Specifications for safe firing area map drawing at weather modification rocket launching sites
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37274-2018	279	Add to Cart	3 days	Specifications for safe firing area map drawing at weather modification rocket launching sites	Valid

Similar standards

GB/T 37254   GB/T 33673   GB/T 33679   GB/T 45424   GB/T 45423   

Basic data

Standard ID: GB/T 37274-2018 (GB/T37274-2018)
Description (Translated English): Specifications for safe firing area map drawing at weather modification rocket launching sites
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A47
Classification of International Standard: 07.060
Word Count Estimation: 14,169
Date of Issue: 2018-12-28
Date of Implementation: 2018-12-28
Regulation (derived from): National Standard Announcement No. 17 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37274-2018: Specifications for safe firing area map drawing at weather modification rocket launching sites

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specifications for safe firing area map drawing at weather modification rocket launching sites ICS 07.060 A47 National Standards of People's Republic of China Safety impact map of artificially affected weather rockets Drawing specification Launchingsites Published on.2018-12-28 2018-12-28 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Basic requirements 1 5 Safety shot selection 1 6 safe shooting icon painted 2 7 Safety Shooting Chart Review 3 Appendix A (informative appendix) Safety Shooting Pattern for Artificially Affected Weather Rocket Operation Point Figure 4 Appendix B (informative appendix) Maximum range data for rain and flood control rockets theory 5 Appendix C (informative appendix) Example 6 of the calculation of the azimuth and elevation range of the safety shot Reference 8

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Meteorological Administration. This standard is under the jurisdiction of the National Technical Committee for Artificial Weather Modification (SAC/TC538). This standard was drafted. Shandong Provincial People's Government Artificial Weather Influencing Office, China Meteorological Administration Shanghai Materials Management Office, Shanxi Province Labor Rainfall Flood Control Office, Qingdao Municipal People's Government Office of Artificial Weather Modification. The main drafters of this standard. Gong Yuli, Guo Jian, Liu Wei, Li Peiren, Wang Jun, Yan Zhen, Yang Fan, Zhang Hongsheng. Safety impact map of artificially affected weather rockets Drawing specification

1 Scope

This standard stipulates the requirements for the selection of safety shots for the artificially affected weather rocket operating points and the drawing and review of safety shots. This standard is applicable to the drawing of the safety shot boundary map of the artificially affected weather rocket operating point.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2260 Administrative division code of the People's Republic of China QX/T 151 Artificial Weather Influencing Terms

3 Terms and definitions

The following terms and definitions defined by QX/T 151 apply to this document. 3.1 Rocket safety shot safefiringareaofrocketlaunching In order to avoid the failure of the self-destruction or parachute device failure rockets fall into densely populated areas or safe areas preset by important facilities. Note. Population-intensive areas refer to towns, villages, schools, etc.; important facilities refer to oil depots, chemical plants, high-speed railways, airports, cultural relics and military facilities.

4 basic requirements

4.1 To draw a safe shot plot, the scope, plotting method and audit requirements of the safe shot should be clarified. 4.2 The safety shot map shall include the base map (6.1), the horizontal distance circle (6.2), the shooting distance circle (6.3), the bearing line segment (6.4), and the safety shot boundary pattern. (6.5), safety shot number (6.6), safety shot range table (6.7), labeling information (6.8) and other elements, the sample picture is shown in Figure A.1 of Appendix A. 4.3 The length of the printed frame of the safety shot line shall be not less than 0.9m and the width shall not be less than 0.6m.

5 Security shot selection

5.1 Selection rules The safety shot should be selected within the maximum theoretical range of the rocket around the operating point and observe the following rules. a) Based on the launcher center, there should be no densely populated areas and important facilities within 1km of the launch of the rocket; b) Avoid densely populated areas and important facilities, and the corresponding elevation angle should be 50°~75°; c) The distance between the safety shooting boundary and the surrounding densely populated areas and important facilities should be greater than.200m. 5.2 Minimum range of safety shots The range of azimuth and azimuth of the rocket corresponding to the selected safety shot should meet the following conditions. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37274-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37274-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37274-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37274-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.