GB/T 3681.2-2021 English PDF

US$224.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3681.2-2021: Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3681.2-2021	224	Add to Cart	3 days	Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass	Valid

Similar standards

GB/T 3681.1   GB/T 2918   GB/T 3960   GB/T 3682.2   GB/T 3682.1   

Basic data

Standard ID: GB/T 3681.2-2021 (GB/T3681.2-2021)
Description (Translated English): Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G31
Word Count Estimation: 11,124
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 3681.2-2021: Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics -- Methods of exposure to solar radiation -- Part 2: Direct weathering and exposure behind window glass ICS 83:080:01 CCSG31 National Standards of People's Republic of China Partially replaces GB/T 3681-2011 Test method for solar radiation exposure of plastics Part 2: Direct natural weathering and Weathering after exposure to window glass (ISO 877-2:2009, IDT) Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 1 5 Device 1 6 Test sample 3 7 Exposure conditions for test samples 4 8 Exposure Cycle 4 9 Method 5 10 results in 6 11 Test report 6 Reference 7

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 2 of GB/T 3681 "Test methods for solar radiation exposure of plastics": GB/T 3681 has issued the following part: --- Part 1: General; --- Part 2: Direct natural weathering and weathering after exposure to glazing: This document replaces GB/T 3681-2011 "Plastics Natural Sunlight Weathering, Glass Filtered Sunlight Weathering and Fresnel Mirrors" Exposure Test Methods for Accelerated Solar Weathering" on direct natural solar radiation (Method A), glass filtered solar radiation (Method B) content: Compared with GB/T 3681-2011, except for structural adjustment and editorial changes, the main technical changes are as follows: a) Changed the content of the "Device" chapter to provide the aluminum alloy model of the device used in Method A and refine the glass used in Method B requirements (see Chapter 5, 5:2 and 5:3 of the:2011 edition); b) Changed the inclination angle of "exposure orientation" (see 7:1, 7:1 of the:2011 edition); c) Changed the requirements for "exposed site" (see 7:2, 7:2:1 of the:2011 edition): This document is identical to ISO 877-2:2009 "Test methods for solar radiation exposure of plastics - Part 2: Direct natural weathering and Weathering After Exposure to Window Glass:" A chapter "Terms and Definitions" has been added to this document: The following minimal editorial changes have been made to this document: --- Added "References": Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Petroleum and Chemical Industry Federation: This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC15): This document is drafted by: Guangzhou Synthetic Materials Research Institute Co:, Ltd:, Heilongjiang Xinda Enterprise Group Co:, Ltd:, PetroChina Co:, Ltd: Petrochemical Research Institute, Shandong Daon Polymer Materials Co:, Ltd:, Beijing Tiangang Auxiliary Co:, Ltd:, Guangdong Jushi Chemical Co:, Ltd:, Shaanxi Yanchang Jingwei New Material Technology Industrial Park Co:, Ltd:, Guangzhou Alpha Testing Technology Service Co:, Ltd: Division, ATLAS Asia Pacific Materials Testing Technology Co:, Ltd:, Chongqing Huitong Technology Co:, Ltd: The main drafters of this document: Wang Fei, Lin Hang, Sheng Li, Zhao Lei, Tie Wen'an, Liu Gang, Zhu Hongfang, Tan Zhongyi, Cheng Ge, Ran Hongchuan, Li Jing, Chen Xintai, Tian Xiaoyan, Ma Xudong: This document was first published in 1983; the first revision was in:2000; the second revision in:2011 was incorporated into GB/T 14519-1993 Contents of "Test Method for Indirect Exposure of Plastics to Sunlight After Filtering by Glass Plates"; this is the third revision:

Introduction

The solar radiation exposure test method is an important method for evaluating the outdoor weather resistance of materials: GB/T 3681 "Plastics Solar Radiation Exposure Test "Test Methods" provides a test method for plastics to undergo relevant changes after exposure to a specific environment and a set exposure period, and is intended to consist of three parts: --- Part 1: General; --- Part 2: Direct natural weathering and weathering after exposure to glazing; --- Part 3: Accelerated natural weathering of concentrated solar radiation: Consider GB/T 3681-2011 "Plastics Natural Sunlight Weathering, Glass Filtered Sunlight Weathering and Fresnel Mirror Accelerated Days" Method C in "Exposure Test Methods for Photo Weathering" is rarely used in China, and method C has not been revised according to ISO 877-3 this time: because Therefore, this document only partially replaces GB/T 3681-2011, in which method C can continue to be used, if the Fresnel reflection concentrator has been technically Update, it is recommended to perform the exposure test of Method C in accordance with ISO 877-3: Methods A and B in the solar radiation exposure test simulate outdoor, indoor, or in-vehicle aging, respectively: For specific materials, Users can determine the most suitable exposure test conditions by themselves: Test method for solar radiation exposure of plastics Part 2: Direct natural weathering and Weathering after exposure to window glass

1 Scope

This document specifies Method A for direct exposure of plastics to solar radiation and exposure of plastics to solar radiation after filtration through window glass Method B: The purpose is to evaluate the change in properties of plastics after exposure for a set period of time: Note: The scope of application refers to Chapter 1 in GB/T 3681:1-2021:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 3681:1-2021 Test methods for solar radiation exposure of plastics - Part 1: General (ISO 877-1:2009, IDT) ISO 4582 Measurement of change in colour and properties of plastics after glass filtration after exposure to solar radiation, natural climate or laboratory radiation sources Determination (Plastics-Determinationofchangesincolourandvariationsinpropertiesafterexposuretoglass- filteredsolarradiation, naturalweatheringorlaboratoryradiationsources) Note: GB/T 15596-2021 Determination of color and property changes of plastics after glass filtration after exposure to solar radiation, natural climate or laboratory radiation sources (ISO 4582:2017, IDT) ASTMG24 Standard Method for Testing Sunlight Exposure Through Glass Filtration (Standard Practice for Conducting Exposures toDaylightFilteredThroughGlass)

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document:

4 Principles

See Chapter 4 of GB/T 3681:1-2021:

5 devices

5:1 General Requirements See 5:1 of GB/T 3681:1-2021: When installed, the brackets used in Test Methods A and B shall be capable of providing the required inclination angle (see 7:1), and the test specimen shall be The distance between any part and the ground or other obstacles should not be less than 0:5m: Specimen can be fixed directly on the support, or with suitable clamps Clamped and fixed on the bracket: The fixing device should be installed firmly, but the stress exerted on the sample should be as small as possible, and it should be allowed as far as possible without restraint: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3681.2-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3681.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3681.2-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3681.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.