GB/T 35402-2017 English PDFUS$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 35402-2017: Direct part mark (DPM) two dimensional bar code symbol quality test Status: Valid
Basic dataStandard ID: GB/T 35402-2017 (GB/T35402-2017)Description (Translated English): Direct part mark (DPM) two dimensional bar code symbol quality test Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L71 Classification of International Standard: 35.040 Word Count Estimation: 26,272 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 35402-2017: Direct part mark (DPM) two dimensional bar code symbol quality test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Direct part mark (DPM) two dimensional bar code symbol quality test ICS 35.040 L71 National Standards of People's Republic of China Parts directly mark two-dimensional bar code Symbol quality inspection [ISO /IEC TR29158.2011, Informationtechnology- Directpartmark (DPM) qualityguideline, MOD] 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 symbols and abbreviations 1 5 detection device 2 5.1 Requirements 2 5.2 Lighting 2 5.3 image acquisition requirements 3 6 Reflectance calibration 3 7 image acquisition and processing 4 7.1 Overview 4 7.2 Determine the reflectivity level of the original image of the symbol under test 4 7.3 Binarization image 4 7.4 Initial decoding 4 7.5 image bonding 4 7.6 Final image adjustment 6 8 to determine the contrast parameter 6 8.1 Overview 6 8.2 Calculation unit contrast 6 8.3 Calculation unit modulation ratio 7 8.4 Calculation Symbols Bright Unit Reflectivity 7 9 grading 7 9.1 Cell contrast grading 7 9.2 Symbol Light unit reflectivity 7 9.3 Unit Modulation Ratio 9.4 inherent graphic defacement 8 9.5 Final Grade 8 10 indicates the level of 8 10.1 Overview 8 10.2 Application of quality level requirements of the said 8 10.3 DPM test result level representation 8 10.4 Illumination 9 10.5 Representation using Proprietary Decoding 9 Appendix A (Normative) Threshold Determination Method 10 Appendix B (informative) Additional lighting way of light schematic 14 Appendix C (informative) said the level 16 Appendix D (informative) This standard and GB/T 23704 table 19 References 20 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses redrafted law revision using ISO /IEC TR29158.2011 "automatic identification and data acquisition technology of information technology Direct marking of parts quality guidelines. " This standard compared with ISO /IEC TR29158.2011 more structural adjustment, the specific adjustments are as follows. --- Some of the terms and definitions in Chapter 3 of ISO /IEC TR29158.2011 fall under Chapter 4, in alphabetical order; --- Suspension of ISO /IEC TR29158.2011 6.2, Chapter 7, 7.3, 7.4 and Chapter 8, Chapter 10 suspended paragraph Deal with --- Moved 6.1 of ISO /IEC TR 29158.2011 to Chapter 5 as 5.3; and 6.2 of ISO /IEC TR 29158.2011 Moved to Chapter 5 to 5.2; Moved 6.2 of ISO /IEC TR 29158.2011 to Chapter 5 as 5.3.3; --- 6.4 6.4 "Reflectance Calibration" of ISO /IEC TR 29158.2011 to Chapter 6; --- Move 6.5 of ISO /IEC TR 29158..2011 to Chapter 7 as 7.2; 7.1 of ISO /IEC TR 29158.2011 Become 7.3, after the chapter number extension. This standard and ISO /IEC TR29158.2011 technical differences and the reasons are as follows. --- On normative references, this standard made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows. ● Replacing ISO /IEC 15416 with GB/T 14258 modified to use international standards; ● Replacing ISO /IEC 15415 with revision GB/T 23704 using international standards; ● Replacing ISO /IEC 19762-1 and ISO /IEC 19762-2 with the newly revised ISO /IEC 19762; ● Added GB/T 12905. --- ISO /IEC TR29158.2011 7.3.4 and 7.3.5 merged, rewritten, as 7.5.5, and in which an increase of "Otherwise, Determine the decoding fails, the symbol level is 0, the symbol detection is completed. "Designed to deal with the eventual completion of the loop without decoding. --- Rewrite ISO /IEC TR29158.2011 7.4.6, to solve the problem of unclear logic such as loop overlap, and added "such as If the decoding fails, the decoding fails, the symbol level is 0, and the detection ends. "To deal with if the decoding fails. This standard also made the following editorial changes. --- Change the title of Chapter 5 of ISO /IEC TR 29158.2011 to "Testing equipment"; --- Added Appendix B (informative) "additional lighting schematic light path." This standard by the National Logistics Information Management Standardization Technical Committee (SAC/TC267) and focal point. This standard was drafted unit. China Article Coding Center, Shanghai Institute of Quality and Standardization Institute of Standardization, Fujian Province, the national bar code Quality Supervision and Inspection Center, Shandong Institute of Standardization, China Association for Automatic Identification Technology, Beijing Jiaotong University, Beijing Network Imagination technology hair Exhibition Co., Ltd. The main drafters of this standard. Liu Wei, Yan Ruoyan, Yan Feng, Yuan Jing, Hu Min, Yang Zilong, Wu Hong, Jiangsu Airlines, Wang Long, Dong Teng, Wang Yi, Zhang Yongpei, Zhao Ying, Tang Cheng, Zhang Duo, Hou Hanping, Zhang Qiuxia.IntroductionComponent Direct Marking (DPM) is an identification technology that typically includes, but is not limited to, the use of dots, laser etched, inkjet, and electrochemical Etch and other physical methods, marking the parts. This standard is the DPM generated two-dimensional bar code symbol test method standard. When light is irradiated on the DPM symbol, the symbol mark formed by the dot and physical change will produce different reflections. For non-DPM two-dimensional bar Code, symbols are printed on a smooth surface, because of the different colors and the formation of different intensity of light. DPM two-dimensional bar code, reflecting the situation In contrast, the two reflection states of the mark itself or the background surface may be specular, that is, the reflection angle of light is equal to the incident angle, and this specular reflection Light is often much greater in intensity than diffuse light, resulting in the marker itself being lighter than a light-colored background. In addition, some marking and printing methods only Can generate bitmap graphics, can not form a continuous smooth border. Existing matrix code system specifications and two-dimensional bar code printing quality standards can not meet the above two methods of testing the symbol quality. this The standard aims to build a bridge between the existing two-dimensional bar code quality specifications and the DPM environment. In order to evaluate the DPM two-dimensional bar code symbol quality and Predictive reading performance provides a standardized, image-based measurement method. As with the code system norms and quality standards, the use of this standard, should be based on the specific application requirements to determine the applicable parameters. Parts directly mark two-dimensional bar code Symbol quality inspection1 ScopeThis standard specifies the method of inspection and evaluation of the symbolic quality of two-dimensional bar code for direct marking of parts and components (DPM). This standard applies to DPM two-dimensional bar code symbol quality inspection and DPM two-dimensional bar code detector manufacturing.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 12905 bar code terminology GB/T 14258 Information Technology Automatic Identification and Data Acquisition Technology Bar code symbol quality inspection (GB/T 14258- 2003, ISO /IEC 15416.2000, MOD) GB/T 23704 Information technology, automatic identification and data acquisition technology two-dimensional bar code symbol quality inspection (GB/T 23704- 2009, ISO /IEC 15415.2004, MOD) ISO /IEC 19762 Information Technology Automatic Identification and Data Acquisition Technology (AIDC) Coordination Vocabulary [Informationtechnolo- gy-Automaticidentificationanddatacapture (AIDC) techniques-Harmonizedvocabulary]3 Terms and definitionsGB/T 12905, GB/T 14258, GB/T 23704 and ISO /IEC 19762 and the following terms and definitions apply to this file. 3.1 Reference symbol referencesymbol Printed high-contrast calibration card (such as TheGS1DataMatrixcalibratedconformancestandardtestcard). 3.2 Stick stick A concatenation algorithm that should be connected to a region in connected symbols.4 symbols and abbreviationsThe following symbols and abbreviations apply to this document. CC. Cell Contrast (CelContrast) CM. Cell Modulation Ratio (Cel Modulation) DDG.DPM inherent pattern distribution defacement average rating (DistributedDamageGrade) FPD. Native Pattern Fouling (FixedPatternDamage) LED. Light-emitting diode (LightEmittingDiode) MD. MeanDark ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35402-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 35402-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 35402-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35402-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
