GB/T 22320-2025 English PDFGB/T 22320: Historical versions
Basic dataStandard ID: GB/T 22320-2025 (GB/T22320-2025)Description (Translated English): Information technology - Chinese coded character set - 15��16 dot matrix font of Chinese ideogram Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L71 Classification of International Standard: 35.040 Word Count Estimation: 462,455 Date of Issue: 2025-03-28 Date of Implementation: 10/1/2025 Older Standard (superseded by this standard): GB/T 22320-2019 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 22320-2025: Information technology - Chinese coded character set - 15×16 dot matrix font of Chinese ideogram---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 35.040 CCSL71 National Standard of the People's Republic of China Replace GB/T 22320-2019 Information technology Chinese coded character set Chinese character 15×16 dot matrix font Released on 2025-03-28 2025-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Font and order 1 5 Management of standard data 2 6 Dot matrix font representation method 2 6.1 Grid 2 6.2 Point 2 6.3 Dot Matrix Font 2 7 Dot Font 3 7.1 Word count 3 7.2 Font Data 3 7.3 Chinese characters with reduced strokes 3 7.4 Dot matrix font table 3 Appendix A (Normative) 15×16 dot matrix font data 398 A.1 Representation of 15×16 dot matrix font data 398 A.2 Storage format of 15×16 dot matrix font data 398 A.3 15×16 dot matrix font data example 398 Appendix B (Normative) Chinese Characters with Reduced Strokes 400 Reference 455ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 22320-2019 "Information Technology Chinese Coded Character Set Chinese Character 15×16 Dot Matrix Font" and Compared with GB/T 22320-2019, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) 15×16 dot matrix fonts with 9 compatible code points deleted in the double-byte code area (see 7.4, 7.4 of the.2019 edition); b) Added 214 15×16 dot matrix fonts of Kangxi radicals in the four-character code 0x81398B32~0x8139A035 (see 7.4,.2019 version 7.4); c) The glyphs of some Chinese characters have been changed (see 7.4, 7.4 of the.2019 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Information Technology Standardization Technical Committee (SAC/TC28). This document was drafted by. China Electronics Technology Standardization Institute, Weifang Beida Jade Bird Huaguang Phototypesetting Co., Ltd., Rocket Force Equipment Research The Fourth Research Institute of the Institute. The main drafters of this document are. Huang Shanshan, Cao Ying, Cui Xiaolin, Dai Hong, Lü Jianchun and Zhou Jiping. The previous versions of this document and the documents it replaces are as follows. ---First published in.2008 as GB/T 22320-2008, first revised in.2019; ---This is the second revision.IntroductionGB/T 22320 "Information Technology Chinese Coded Character Set Chinese Character 15×16 Dot Matrix Font" is based on GB 18030 Coded Character Set Double The graphic symbols and Chinese graphic characters provided by the byte part and the four-byte Chinese character part are based on the standard glyphs given in the "General Standard Chinese Character Table" Based on this, and in accordance with the principles of current standardized Chinese character font organization, a 15×16 dot matrix font for Chinese characters used in information systems was specifically designed. GB/T 22320 aims to solve the problem of Chinese character information display in Chinese information processing systems and improve the use of Chinese character font products for information technology. The accuracy and standardization of Chinese characters are to meet the development of Chinese information processing and the needs of international information exchange and the standardization of Chinese characters. It is to stipulate that the information system uses 15×16 dot matrix font of Chinese characters. Information technology Chinese coded character set Chinese character 15×16 dot matrix font1 ScopeThis document specifies 88,115 Chinese characters (including radicals/components) and 894 graphic elements at implementation level 3 in GB 18030-2022. 15×16 dot matrix font for glyph characters. This document is applicable to the design of Chinese character dot matrix fonts in various electronic information products and digital products, and is also applicable to other related equipment.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 18030-2022 Information technology Chinese coded character set3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Glyph A recognizable abstract graphic symbol that is not tied to any particular design. 3.2 Font A collection of glyph images with the same basic design. Note. For example, Songti. 3.3 dotmatrixfont The shape of a graphic character is represented by a collection of points. 3.4 character order The order in which graphic characters are arranged in a set according to certain rules. 4.Font and order This document is based on the "General Standard Chinese Character Table" and is designed according to the principles of current standard Chinese character shape organization. This document arranges the points in the order of double-byte symbol area, double-byte Chinese character area and four-byte Chinese character area as specified in GB 18030-2022. Formation font. ...... |
