GB/T 35381.10-2020 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35381.10-2020	RFQ	ASK	3 days	Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange	Valid

Similar standards

GB 10395.1   GB 16151.1   GB 10395.6   GB/T 35381.14   GB/T 35381.12   GB/T 35381.1   

Basic data

Standard ID: GB/T 35381.10-2020 (GB/T35381.10-2020)
Description (Translated English): Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B90
Classification of International Standard: 65.060.01; 35.240.99
Word Count Estimation: 194,193
Date of Issue: 2020-12-14
Date of Implementation: 2021-04-01
Regulation (derived from): National Standard Announcement No. 28 of 2020
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 35381.10-2020: Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Agricultural and forestry tractors and machinery Serial control and communication data network Part 10: Data exchange between task controller and management information system) ICS 65:060:01; 35:240:99 B90 National Standards of People's Republic of China Agriculture and forestry tractors and machinery Serial control and communication data network Part 10: Task Controller and Management Information System Data exchange (ISO 11783-10:2015, MOD) Released on 2020-12-14 Implemented on 2021-04-01 State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Preface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Abbreviations 3 5 General 3 5:1 Task Management 3 5:2 Task management on FMIS computer 5 5:3 Pre-selection and allocation of equipment 5 5:4 Task Controller Interface Driver 5 5:5 Task Controller User Interface 5 5:6 Data logger function 5 6 Mission Controller Requirements 6 6:1 Task selection and execution 6 6:2 Time and location record 6 6:3 Parameter group record 7 6:4 Task Event Record 7 6:5 Choice of language, format and measurement unit 8 6:6 Connection Management 8 6:7 Task Controller Number 12 6:8 Data exchange on the network 13 7 Data Logger Requirements 23 7:1 Overview 23 7:2 Connection Management 24 7:3 Measurements and totals 24 8 Data transmission 25 8:1 Overview 25 8:2 Extensible Markup Language 25 8:3 Extensible Architecture Definition 25 8:4 XML Schema Definition 26 8:5 XML data transfer file 29 8:6 Binary data transfer file 31 8:7 Device Descriptor Object Pool 36 Appendix A (Normative Appendix) Device Descriptor Object 40 Appendix B (Normative Appendix) Message Definition 47 Appendix C (normative appendix) XML element relationship structure diagram 61 Appendix D (normative appendix) XML elements and attributes 64 Appendix E (Normative Appendix) Pre-defined GB/T 35381 Annex 140 Appendix F (Normative Appendix) Definition of TC Function and Device Descriptor Object Pool 148 Appendix G (Normative Appendix) Task-based time registration 187 References 189

Foreword

GB/T 35381 "Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network" is divided into the following 14 parts: ---Part 1: General Standards for Data Communication; ---Part 2: Physical layer; ---Part 3: Data Link Layer; ---Part 4: Network layer; ---Part 5: Network Management; ---Part 6: Virtual Terminal; ---Part 7: Tool message application layer; ---Part 8: Powertrain news; ---Part 9: Tractor ECU; ---Part 10: Data exchange between task controller and management information system; ---Part 11: Data Element Dictionary; ---Part 12: Diagnostic services; ---Part 13: File Server; ---Part 14: Sequence control: This part is part 10 of GB/T 35381: This section was drafted in accordance with the rules given in GB/T 1:1-2009: This part uses the redrafting law to amend and adopt ISO 11783-10:2015 "Agricultural and forestry tractors and machinery serial control and communication data network Network Part 10: Data Exchange between Task Controller and Management Information System: The technical differences between this part and ISO 11783-10:2015 and the reasons are as follows: ---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments: The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows: ● Replace ISO 11783-1 with GB/T 35381:1 which is equivalent to adopting international standards (see Chapter 3, Chapter 4, 5:3, 5:6 and 7:1); ● Replace ISO 11783-3 with GB/T 35381:3 which is equivalent to the international standard (see 6:6:3, 6:8:1, 8:7 and Appendix B); ● Replace ISO 11783-5 with GB/T 35381:5 equivalent to the international standard (see 6:6:2, 6:6:3, Appendix A and Appendix D); ● Replace ISO 11783-6 with GB/T 35381:6 equivalent to the international standard (see 6:5, 8:6:2, 8:6:4, 8:7, Appendix A And Appendix D); ● Replace ISO 11783-7 with GB/T 35381:7 equivalent to the international standard (see 6:5, 6:6:3, 6:6:5, Appendix A, Record B, Appendix D and Appendix G); ● Replace ISO 11783-11 with GB/T 35381:11 equivalent to the international standard (see 6:8:1, 8:7, Appendix A, Appendix B, Appendix D and Appendix F); ● Replace ISO 11783-12 with GB/T 35381:12, which is equivalent to the international standard (see Appendix A, Appendix D and Appendix F): --- Modify WGS84 to CGS2000 to adapt to my country's technical conditions (see 8:6:4 and Appendix D): ---The Beidou Positioning System (BDS) has been added to adapt to my country's technical conditions (see 6:2, 8:6:3, 8:7, Appendix A and Appendix D): This part was proposed by China Machinery Industry Federation: This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201): Drafting organizations of this section: Lovol Heavy Industries Co:, Ltd:, Chinese Academy of Agricultural Mechanization Sciences, Anhui Zhongke Intelligent Perception Industrial Technology Technology Research Institute Co:, Ltd:, Fengjiang Intelligent Software Technology (Nanjing) Co:, Ltd:, Xingguang Agricultural Machinery Co:, Ltd:, Shandong Shifeng (Group) Limited Liability Company, Henan University of Science and Technology, Shandong Zhongzhi Electronics Co:, Ltd: The main drafters of this section: Li Jinliang, Yuan Yanwei, Zhang Junning, Li Zhengyu, Ji Baofeng, Gao Hongfeng, Zhang Wei, Wang Lili, Mao Wenhua, Zhao Bo, Lu Chengwei, Li Yang, Wang Fengzhu, Wang Changwei, Sheng Shouzhao, Qian Juping, Lin Lianhua, Xu Haigang, Li Hongwei, Li Songhe: Agriculture and forestry tractors and machinery Serial control and communication data network Part 10: Task Controller and Management Information System Data exchange

1 Scope

GB/T 35381 specifies the serial control and communication data network of agricultural and forestry tractors and suspended, semi-suspended, traction or self-propelled machines: Its purpose is to standardize data transmission methods and formats between sensors, drivers, control components, information storage and display units: These devices Installed on tractors or implements or standard equipment on them: This part of GB/T 35381 specifies the task controller application layer and defines the communication between the task controller and the electronic control unit Requirements and business: This part also specifies the data format for communication with the farm management computer, control calculations, and messages sent to the control function: 息format: This part is applicable to the data of task controller and management information system in the serial control and communication data network of agricultural and forestry tractors and machinery exchange:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 35381:1 Agricultural and forestry tractors and machinery serial control and communication data network Part 1: Data communication general standard (GB/T 35381:1-2017, ISO 11783-1:2007, IDT) GB/T 35381:3 Agricultural and forestry tractors and machinery serial control and communication data network Part 3: Data link layer (GB/T 35381:3-2017, ISO 11783-3:2014, IDT) GB/T 35381:5 Agricultural and forestry tractors and machinery serial control and communication data network Part 5: Network management (GB/T 35381:5-2017, ISO 11783-5:2011, IDT) GB/T 35381:6 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 6: Virtual Terminal (GB/T 35381:6-2017, ISO 11783-6:2014, IDT) GB/T 35381:7 Agricultural and forestry tractors and machinery serial control and communication data network Part 7: Machine message application layer (GB / T35381:7-2017, ISO 11783-7:2015, IDT) GB/T 35381:11 Agricultural and forestry tractors and machinery serial control and communication data network Part 11: Data element dictionary (GB/T 35381:11-2017, ISO 11783-11:2011, IDT) GB/T 35381:12 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 12: Diagnostic Service (GB/T 35381:12-2020, ISO 11783-12:2019, IDT) ISO 11898-1 Road Vehicle Controller Area Network (CAN) Part 1: Data Link Layer and Physical Signal (Roadvehi- cles-Controlerareanetwork(CAN)-Part 1:Datalinklayerandphysicalsignaling) ISO /IEC 10646 Information Technology Universal Coded Character Set (UCS) (Informationtechnology-UniversalCoded CharacterSet(UCS))

3 Terms and definitions

The following terms and definitions defined in GB/T 35381:1 apply to this document: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35381.10-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35381.10-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35381.10-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35381.10-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.