GB/T 35365-2017 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35365-2017: Welding wires of titanium alloy for submersible application
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35365-2017	199	Add to Cart	3 days	Welding wires of titanium alloy for submersible application	Valid

Similar standards

GB/T 38973   GB/T 38988   GB/T 37520   GB/T 35368   GB/T 35364   

Basic data

Standard ID: GB/T 35365-2017 (GB/T35365-2017)
Description (Translated English): Welding wires of titanium alloy for submersible application
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H64
Classification of International Standard: 77.150
Word Count Estimation: 10,127
Date of Issue: 2017-12-29
Date of Implementation: 2018-07-01
Regulation (derived from): National Standards Bulletin 2017 No. 32
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 35365-2017: Welding wires of titanium alloy for submersible application

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Welding wires of titanium alloy for submersible application ICS 77.150 H64 National Standards of People's Republic of China Submersible titanium alloy wire 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard proposed by China Shipbuilding Industry Corporation. This standard by the National Standardization Technical Committee submarine (SCA/TC306) centralized. This standard was drafted by China Shipbuilding Industry Corporation 725 Institute, Western Superconducting Materials Technology Co., Ltd.. The main drafters of this standard.Xiong Jinhui, Zhang Jianxin, Liu Xilin, Yan Yangyang, Chen Haisheng. Submersible titanium alloy wire

1 Scope

This standard specifies the submersible titanium and titanium alloy wire (hereinafter referred to as wire) classification, status, requirements, test methods, inspection rules And packaging, marking and quality certificate. This standard applies to inert gas welding, plasma welding and narrow gap welding methods such as welding wire.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 4698 (all parts) - Methods for chemical analysis of sponge titanium, titanium and titanium alloys GB/T 5168 alpha-beta titanium alloy high and low magnification test methods GB/T 8180 Titanium and titanium alloy products packaging, marking, transportation and storage.

3 categories

Wire is divided into straight strips, roll and disk-shaped three types.

4 state

Product status is divided into soft and hard two states, generally soft, hard state should be marked instructions.

5 requirements

5.1 chemical composition TA2, TA24, TA31 and TC4 corresponding wire were TA1, Ti75A, Ti80A and TC3, the chemical composition should be consistent with Table 1 Provisions. Table 1 Chemical composition (mass fraction) Grade The main element Impurity elements no greater than Ti Al Nb Zr Mo V Fe Si CNHO TA1 substrate - - - - - 0.15 - 0.05 0.03 0.003 0.12 Ti75A matrix 1.0 to 3.0 - 1.0 to 3.0 1.0 to 2.0 - 0.15 0.04 0.10 0.04 0.010 0.10 Ti80A Matrix 4.0 ~ 6.0 2.5 ~ 3.5 1.5 ~ 2.5 0.6 ~ 1.5 ~ 0.15 0.04 0.10 0.04 0.010 0.10 TC3 matrix 4.5 ~ 6.0 - - - 3.5 ~ 4.5 0.25 - 0.05 0.05 0.012 0.15 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35365-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35365-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35365-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35365-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.