GB/T 38973-2020 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 38973-2020: Titanium and titanium alloy bars for Additive manufactural powder Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 38973-2020: Titanium and titanium alloy bars for Additive manufactural powder---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38973-2020GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.50;25.030 H 64 Titanium and titanium alloy bars for additive manufactural powder ISSUED ON: JULY 21, 2020 IMPLEMENTED ON: JUNE 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Technical requirements ... 4 4 Test methods ... 7 5 Inspection rules ... 8 6 Marking, packaging, transportation, storage and quality certificate ... 9 7 Order form (or contract) contents ... 10 Titanium and titanium alloy bars for additive manufactural powder1 ScopeThis Standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, quality certificate and purchase order (or contract) of titanium and titanium alloy bars (hereinafter referred to as bars) for additive manufactural powder. This Standard applies to titanium and titanium alloy bars for manufactural powder of rotating electrode method and gas atomization method.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3620.2, Designation and composition of titanium and titanium alloys GB/T 4698, Methods for chemical analysis of titanium sponge, titanium and titanium alloys GB/T 5193, Method of ultrasonic inspection for wrought titanium and titanium alloy products GB/T 8180, Wrought titanium and titanium alloy products packing marking transporting and storing YS/T 1262, Method for chemical analysis of titanium sponge, titanium and titanium alloys - Determination of multielement content - Inductively coupled plasma atomic emission spectrometry3 Technical requirements3.1 Product classification The designation, status and specifications of the bars shall meet the requirements of Table 1. Other specifications, if any, shall be indicated in the order form (or contract). 3.3 Dimensions and allowable deviation 3.3.1 The allowable deviation of bar diameter is ±0.1 mm. 3.3.2 The allowable deviation of bar length is ±5 mm. A small number of bars whose length is shorter than the nominal length of 10 mm ~ 100 mm is allowed; the number shall not exceed 5% of the total number. 3.3.3 Both ends of the bar shall be cut flat; the cut slope shall not be greater than 4 mm. 3.3.4 The straightness of the bar shall not be greater than 2 mm/m. When the buyer has special requirements for straightness, it shall be indicated in the order form (or contract). 3.4 Ultrasonic inspection Bars shall be subjected to ultrasonic inspection, which shall meet the requirements of Grade A in GB/T 5193; there shall be no defects such as internal cracks and inclusions. 3.5 Surface condition The bars are supplied with a machined surface; the surface roughness Ra value shall not be greater than 3.2 μm. 3.6 Appearance quality 3.6.1 The surface of the bar shall be clean; no defects such as oxide scale, cracks, and folds are allowed. Local defects on the surface of the bar shall be removed; the cleaning depth shall not exceed the allowable deviation of the diameter. 3.6.2 The surface of the bar is allowed to have individual minor scratches, indentations, pitting and other defects that are not more than half of the allowable deviation of the diameter.4 Test methods4.1 The chemical composition analysis shall be carried out in accordance with GB/T 4698 or YS/T 1262; the arbitration analysis shall be carried out in accordance with GB/T 4698. 4.2 External dimensions and allowable deviation inspection shall be carried out with corresponding precision measuring tools. 4.3 The ultrasonic inspection shall be carried out in accordance with GB/T 5193. 5.4 Determination of the test result 5.4.1 When the chemical composition test result is unqualified, a repeated test is allowed for the unqualified element. If repeated inspections are still unqualified, judge the batch of products as unqualified. 5.4.2 When the external dimensions and allowable deviations, ultrasonic inspection, surface condition, and appearance quality inspection results are unqualified, judge a single piece as unqualified.6 Marking, packaging, transportation, storage andquality certificate 6.1 Product marking The end face of each bar shall be marked with the following: a) designation; b) specifications; c) status; d) smelting furnace number or batch number. 6.2 Packaging, marking, transportation and storage The packaging, marking, transportation and storage of bars shall meet the requirements of GB/T 8180. 6.3 Quality certificate Each batch of bars shall be accompanied by a quality certificate, indicating: a) name of the supplier; ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 38973-2020 be delivered?Answer: The full copy PDF of English version of GB/T 38973-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 38973-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38973-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38973-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 38973-2020?A step-by-step guide to download PDF of GB/T 38973-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 38973-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
