GB/T 34430.3-2017 English PDF

US$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34430.3-2017: Ships and marine technology -- Protective coatings and inspection method -- Part 3: Cargo oil tanks of crude oil tankers
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 34430.3-2017	759	Add to Cart	6 days	Ships and marine technology -- Protective coatings and inspection method -- Part 3: Cargo oil tanks of crude oil tankers	Valid

Similar standards

GB/T 7094   CB 1146.9   GB/T 34430.5   GB/T 34430.4   GB/T 34430.2   

Basic data

Standard ID: GB/T 34430.3-2017 (GB/T34430.3-2017)
Description (Translated English): Ships and marine technology -- Protective coatings and inspection method -- Part 3: Cargo oil tanks of crude oil tankers
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U06
Classification of International Standard: 47.020.99
Word Count Estimation: 38,379
Date of Issue: 2017-10-14
Date of Implementation: 2018-05-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34430.3-2017: Ships and marine technology -- Protective coatings and inspection method -- Part 3: Cargo oil tanks of crude oil tankers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ships and marine technology - Protective coatings and inspection method - Part 3. Cargo oil tanks of crude oil tankers ICS 47.020.99 U06 National Standards of People's Republic of China Ship and offshore technical protective coatings and inspection methods Part 3. Crude oil tank method-Part 3.Cargooiltanksofcrudeoiltankers (ISO 16145-3.2012, IDT) 2017-10-14 Published 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 symbols and abbreviations 3 4.1 symbol 3 4.2 Abbreviations 3 5 painting job general procedure 3 6 paint job standard 4 6.1 Painting Area 4 6.2 Surface treatment 5 6.3 Surface Preparation and Shop Primer 7 6.4 Secondary surface treatment 8 6.5 Painting 9 6.6 Coating defects handling 11 7 check 12 7.1 Inspection Procedure 12 7.2 coating inspection 12 7.3 Dry film thickness measurement 13 Appendix A (informative) abrasive conductivity measurement 17 Appendix B (Informative) Determination of water-soluble salt content 18 Appendix C (informative) inspection items and inspection management 19 Appendix D (Informative) Evaluation of the degree of damage to the coating 24 Appendix E (Informative) Coating Technical Documents (CTF) Standard 25 References 34

Foreword

GB/T 34430 "marine and marine protective coatings and inspection methods" is divided into five parts. --- Part 1. Dedicated seawater ballast tanks; --- Part 2. Empty bulk carriers and tanker; --- Part 3. Crude oil tanker; --- Part 4. Automatic measurement of water-soluble salts; --- Part 5. Assessment of coating damage. This section GB/T 34430 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with ISO 16145-3.2012 "Ship and marine protection coatings and inspection methods Part 3 Points. Crude cargo tank. " The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows. --- GB/T 8923.3-2009 Steel sheets before coating - Visual evaluation of surface cleanliness - Part 3. Welds, Treatment of surface defects on edges and other areas (ISO 8501-3.2006, IDT) --- GB/T 13288.1-2008 Before coating the steel surface treatment After blasting steel surface roughness characteristics 1 Part 2. Technical requirements and definitions for comparative specimens of ISO surface roughness used to assess the surface roughness of steel after blasting (ISO 8503-1.1988, IDT) --- GB/T 13288.2-2011 Steel surface treatment before coating the steel surface after spray cleaning Properties of surface roughness 2 Part 11. Determination of the surface roughness of steel after abrasive blasting Comparative sample method (ISO 8503-2.1988, IDT) This section made the following editorial changes. --- According to national conditions, add footnotes in 3.3, 6.4.3.2 and Table 6; --- According to the hull chart requirements, improve the Figure 5; --- In the references to supplement the text cited in the relevant standards. This part is proposed by China State Shipbuilding Corporation. This standard by the National Standardization Technical Committee marine craft sub-Technical Committee (SAC/TC12/SC2) centralized. This part of the drafting unit. China Shipbuilding Technology and Economy Institute, Hudong Zhonghua Shipbuilding (Group) Co., Ltd.. The main drafters of this section. Song Yan Yuan, Liu Chunya, Geng Haiping, Jia Hengtao, Yan Qing, Chen Liang. Ship and offshore technical protective coatings and inspection methods Part 3. Crude oil tank

1 Scope

GB/T 34430 provisions of this part of not less than 500 gross tonnage crude oil tanker cargo tank coating protection and inspection methods. This section applies to the contract on or after January 1,.2013 or no construction contract but on July 1,.2013 and after the shop Put keel or similar construction phase, or ship delivered on or after January 1,.2016. Note. Crude oil tanker means a tankers engaged in the transportation of crude oil. This section applies to Section 1.11.1 or 1.11.3 of the International Oil Pollution Prevention Certificate appendix (format B) Definition of crude tanker and crude oil or product tanker.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. Visual inspection of surface cleanliness of steel surfaces before application of paints - Part 1. Uncoated Of the steel surface and the full removal of the original coated steel surface rust grades and treatment levels (ISO 8501-1.2007, IDT) GB/T 18570.3-2005 Determination of surface cleanliness of steel surfaces before application of paints - Part 3 - Coatings Dust assessment of the surface of the front steel (pressure sensitive tape method) (ISO 8502-3.1992, IDT) GB/T 18570.9-2005 Steel sheets before application of paints and varnishes - Surface cleanliness assessment - Part 9. Water soluble salts Field Conductivity Assay (ISO 8502-9.1998, IDT) ISO 8501-3-20011) Visual inspection of surface cleanliness of steel substrates before application of paints - Part 3 - Welds, edges And other regions of the surface defect processing level (Preparationofsteelsubstratesbeforeapplicationofpaintsandre- latedproducts-Visualassessmentofsurfacecleanliness-Part 3.Preparationgradesofwelds, cut edgesandotherareaswithsurfaceimperfections) 1) This standard has been superseded by ISO 8501-3.2006. ISO 8503-1.2012 Steel sheets before application of paints and varnishes - Surface roughness characteristics of blast - cleaned steel substrates - Part 1. ISO of the surface roughness of the steel surface after the blasting clean up the technical requirements and definitions of comparative samples (Preparationofsteel substratesbeforeapplicationofpaintsandrelatedproducts-Surfaceroughnessracteristicsof blast-cleanedsteelsubstrates-Part 1.SpecificationsanddefinitionsforISO surfaceprofilecompara- torsfortheassessmentofabrasiveblast-cleanedsurfaces) ISO 8503-2.2012 Steel sheets before application of paints and varnishes - Surface roughness characteristics of blast-cleaned steels - Part 2 - Wear Material blasting after cleaning steel surface roughness rating method of comparison sample block method (Preparationofsteelsubstratesbefore applicationofpaintsandrelatedproducts-Surfaceroughnessracteristicsofblast-cleanedsteel substrates-Part 2. Method of grading of surface profile of abrasiveblast-cleanedsteel-Compa- ratorprocedure) SOLAS regulation II-1/3-2 adopted by resolution IACSUISC223 MSC.215 (82) "All types of vessels Ballast tanks and bulk carriers at both sides of the protective coating performance standards (PSPC) "application [For Application of SOLAS Regulation II-1/3-2 Performance Standard for Protective Coatings (PSPC) forDedicated Sealer BalastTanks ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34430.3-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34430.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34430.3-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34430.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.