GB/T 34030-2017 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34030-2017: Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 34030-2017	599	Add to Cart	5 days	Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications	Valid

Similar standards

GB/T 589   GB/T 592   GB/T 17727   GB/T 34032   

Basic data

Standard ID: GB/T 34030-2017 (GB/T34030-2017)
Description (Translated English): Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U55
Classification of International Standard: 47.020.30
Word Count Estimation: 30,334
Date of Issue: 2017-07-31
Date of Implementation: 2018-02-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34030-2017: Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ships and marine technology - Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications ICS 47.020.30 U55 National Standards of People's Republic of China Shipbuilding and offshore technical vessels thermosetting resin glass Fiber tube and accessories technical requirements (ISO 15840.2004, MOD) 2017-07-31 Posted 2018-02-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Categories 2 4.1 General Provisions 2 4.2 Type 2 4.3 resin 3 4.4 Rating 3 4.5 Rated pressure (see Appendix A) 3 4.6 Fire resistance (see Appendix B) 3 5 Ordering Information 4 5.1 General Provisions 4 5.2 Case 4 5.3 General Information 4 5.4 Fire resistance 4 5.5 Other required information 4 6 performance requirements 4 6.1 Internal pressure 4 6.2 external pressure 4 6.3 Fire resistance 5 6.4 Flame retardant 5 6.5 Combustion of smoke and other toxic substances 5 6.6 Design temperature 5 6.7 Material Compatibility 5 6.8 Resistance 5 6.9 Electrostatic shielding 5 6.10 drinking water 5 7 other requirements 5 8 Inspection and sampling 5 8.1 pipe 5 8.2 Annex 6 8.3 Flanges and Connectors 6 8.4 Reinspection 7 8.5 Product Quality Documents 7 Appearance and processing 7 10 logo 8 11 certification 8 Appendix A (Normative) Pipe, fittings and connectors to determine the rated pressure 9 Appendix B (Normative) Fire resistance test 10 Appendix C (Normative) Conductive glass fiber tube test method 17 Appendix D (informative) Fire resistance requirements [quoted from IMO Resolution A.753 (18)] 21 Appendix E (Informative) This standard compared with ISO 15840.2004 structure changes 24 Appendix F (informative) Technical differences between this standard and ISO 15840.2004 and its causes 25 References 26

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses redrafted Law Amendment to adopt ISO 15840.2004 "marine and marine technical thermoset resin glass fiber tube and Accessories technical requirements. " This standard compared with ISO 15840.2004, there are structural adjustments, Appendix E lists the standard and ISO 15840.2004 Chapter Number change control list. This standard and ISO 15840.2004 technical differences and the reasons for appendix F. This standard made the following editorial changes. a) English units are deleted, leaving only the SI system; b) According to 1bar = 0.1MPa conversion ratio, the value of the bar for the corresponding changes; c) adjust the position of Figure B.1; d) Replace the description of the fire-resistance requirements table in Appendix D with the form of a table. This standard proposed by China State Shipbuilding Corporation. This standard by the National Marine Machinery Standardization Technical Committee Annex Technical Committee (SAC/TC137/SC3) centralized. This standard was drafted by the China Shipbuilding Industry Institute of Integrated Technology and Economy. The main drafters of this standard. Sun Yaogang, Zhang Meiling. Shipbuilding and offshore technical vessels thermosetting resin glass Fiber tube and accessories technical requirements Caution --- users of this standard are responsible for the provisions before use to ensure personal safety and health measures and to determine these rules System applicability.

1 Scope

This standard specifies the classification of marine thermosetting resin fiberglass tubes and accessories (hereinafter referred to as glass fiber tubes and accessories), ordering information, sex Can request, other requirements, inspection and sampling, appearance and surface defect handling, marking and certification. This standard applies to the nominal size of not more than DN1200 (NPS48) glass fiber tube and accessories. This standard uses the International System of Units. Dimensionless symbols DN and NPS replace traditional terms such as "nominal diameter", "size" and "nominal dimension".

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1634.1 Plastics - Determination of load deflection temperature - Part 1. General test methods (GB/T 1634.1-2004, ISO 75-1.2003, IDT) GB/T 1634.2 Determination of plastic deformation temperature of the load Part 2. Plastic, hard rubber and long fiber-reinforced composite materials (GB/T 1634.2-2004, ISO 75-2.2003, IDT) GB/T 14520 Determination of Residual Styrene Monomer in Unsaturated Polyester Resin Reinforced Plastics by Gas Chromatography (GB/T 14520-1993, ISO 4901.1985, NEQ) GB/T 19001-2008 quality management system requirements (ISO 9001.2008, IDT) GB/T 19466.2 Plastics - Differential scanning calorimetry (DSC) Part 2. Determination of glass transition temperature (GB/T 19466.2- 2004, ISO 11357-2.1999, IDT) ASMEB16.1.1998 cast iron pipe flange and flange accessories (Castironpipeflangesandflangedfittings) ASMEB16.5.1996 pipe flange and flange fittings (Pipeflangesandflangedfittings) ASTMD883 plastic term (Standardterminologyrelatingtoplastics) ASTMD1598 constant internal pressure plastic tube rupture time test method (Standardtestmethodfortime-to-failureof plasticpipeunderconstantinternalpressure) ASTMD1599 plastic pipes, pipes and fittings short-term burst pressure test method (Standardtestmethodforresistance toshort-timehydraulicfailurepressureofplasticpipe, tubingandfittings) ASTMD2310 Mechanism Glass fiber reinforced thermosetting resin tube classification method [Standardclassificationformachine- madefibreglass (glass-fiber-reinforcedthermosetting-resin) pipe] ASTMD2583 Barcol indentation test method for hardness of hard plastic stamping (Standardtestmethodforin- dentationhardnessofrigidplasticsbymeansofaBarcolimpressor) ASTMD2584 curing enhanced resin burning loss test method (Standardtestmethodforignitionlossofcured reinforcedresins ASTMD2924 enhanced thermosetting resin glass fiber tube pressure resistance test method [Standardtestmethodforexternal pressureresistanceoffibreglass (glass-fiber-reinforcedthermosetting-resin) pipe] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34030-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34030-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34030-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34030-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.