GB/T 33578.1-2017 English PDFUS$479.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33578.1-2017: Guideline of risk-based inspection of complete units -- Part 1: Ethylene units Status: Valid
Basic dataStandard ID: GB/T 33578.1-2017 (GB/T33578.1-2017)Description (Translated English): Guideline of risk-based inspection of complete units -- Part 1: Ethylene units Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J74 Classification of International Standard: 23.020.30 Word Count Estimation: 24,231 Date of Issue: 2017-05-12 Date of Implementation: 2017-12-01 Quoted Standard: GB/T 26610.1; GB/T 26610.2; GB/T 26610.3; GB/T 26610.4; GB/T 26610.5; GB/T 30579 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the risk-based inspection (RBI) implementation details for ethylene plants. This standard is applicable to the superheated steam dilution tube furnace cracking method, the ethylene plant with the sequential separation process process is equipped with the RBI project pressure equipment, the pre-deethane and the pre-de-propane process ethylene plant can refer to the use. This standard does not apply to safety valves, safety valve inspection strategy see GB/T 26610.2. GB/T 33578.1-2017: Guideline of risk-based inspection of complete units -- Part 1: Ethylene units---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Guideline of risk based inspection of complete units - Part 1. Ethylene units ICS 23.020.30 J74 National Standards of People's Republic of China Code of inspection based on risk of complete sets of equipment Part 1. Ethylene plant Part 1. Ethyleneunits 2017-05-12 released 2017-12-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 General 1 5 common process 2 6 device damage pattern distribution 2 7 Risk-based inspection rules 5 Appendix A (informative) Introduction to the ethylene plant process Appendix B (informative) Ethylene plant damage pattern flow distribution ForewordGB/T 33578 "Set of equipment based on the risk of inspection rules" is divided into two parts. - Part 1. Ethylene plant; Part 2. Catalytic Cracking Unit. This part is part 1 of GB/T 33578. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the National Boiler and Pressure Vessel Standardization Technical Committee (SAC/TC262) proposed and centralized. This part of the drafting unit. China Special Equipment Testing Research Institute, the State Administration of Quality Supervision, Inspection and Quarantine Special Equipment Safety Supervision Bureau, Fertilizer General Machinery Research Institute, China Petroleum & Chemical Corporation, China Petrochemical Engineering Construction Co., Ltd., China Petroleum & Chemical Co., Ltd. Company Zhenhai Refining & Chemical Branch, China Petroleum & Chemical Corporation Qilu Petrochemical Company, China National Petroleum Corporation Dushan Petrochemical branch, Shanghai Special Equipment Supervision and Inspection Technology Research Institute. The main drafters of this part are. Wang Hui, Jia Guodong, Du Chenyang, Dai Cheng, Cao Luowei, Xu Feng, Wang Xiaomei, Ai Zhibin, Hu Jiushao, He Chenghou, Xie Zhigang, Wang Jianbo, Miao Junke, Zhao Lifan, Luo Xiaoming, Shao Shanshan, Li Xiang. Code of inspection based on risk of complete sets of equipment Part 1. Ethylene plant1 ScopeThis part of GB/T 33578 gives the risk-based inspection (RBI) implementation details for ethylene units. This part applies to the superheated steam dilution tube furnace cracking method, the order of separation process-based ethylene plant in the implementation of the RBI items The purpose of the pressure equipment, pre-deethane and de-propane process of ethylene plant can refer to the use. This part does not apply to safety valves, safety valve inspection strategy see GB/T 26610.2.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 26610.1 Guidelines for the implementation of risk-based inspection systems for pressurized equipment systems - Part 1. Basic requirements and procedures GB/T 26610.2 Guidelines for the implementation of risk-based inspection systems for pressurized equipment systems - Part 2. Risk-based inspection strategies GB/T 26610.3 Guidelines for risk-based inspection of pressurized equipment systems - Part 3. Qualitative analysis of risk GB/T 26610.4 Guidelines for risk-based inspection of pressure equipment systems - Part 4. Quantitative analysis of failure possibilities GB/T 26610.5 Guidelines for the implementation of risk-based inspection systems for pressurized equipment systems - Part 5. Quantitative analysis of failure consequences Damage pattern recognition of GB/T 30579 pressure equipment3 terms and definitionsThe terms and definitions defined in GB/T 26610.1 to 26610.5 and GB/T 30579 apply to this document.4 General4.1 This part is based on GB/T 26610.1 ~ 26610.5 and GB/T 30579, for the typical petrochemical plant - ethylene The installation of the equipment, equipment characteristics of the test rules. This part does not replace the risk assessment work, but GB/T 26610.2 specific The application of the device. 4.2 This part of the ethylene plant in the process to determine the potential damage to the equipment on the basis of damage to the model, given the key equipment and its special The test method of the remaining equipment based on the damage pattern is determined according to GB/T 26610.2. 4.3 The damage pattern of the ethylene plant described in this section is determined by its typical materials, typical process conditions, and is likely to cause potential damage. real The specific damage pattern of the ethylene plant should be adjusted according to the actual situation. In order to allow the user to distinguish between primary and secondary, this part is based on injury Mode analysis and practical experience, according to the severity of the injury pattern and frequency, the damage model is further divided into the main damage mode And secondary damage patterns. 4.4 The potential damage modes of the pressurized equipment in this section are given under normal operating conditions, under normal conditions or other special conditions (eg Load, low load, raw material composition changes, ultra-designed) damage patterns and risk-based inspection rules determined by the actual situation. 4.5 inspection process found in the damage mode, the inspection staff should be based on the extent and extent of damage to determine whether the need for inspection. Inspection process The defects are dealt with according to the relevant standards. 4.6 Atmospheric corrosion (including no insulation and thermal insulation) for the carbon steel and low alloy steel equipment, the prevalence of damage patterns, test methods ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33578.1-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 33578.1-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33578.1-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33578.1-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
