GB/T 33490-2025 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33490-2025: Basic requirements for exhibition construction service Status: Valid GB/T 33490: Historical versions
Basic dataStandard ID: GB/T 33490-2025 (GB/T33490-2025)Description (Translated English): Basic requirements for exhibition construction service Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P00 Classification of International Standard: 91.180 Word Count Estimation: 9,931 Date of Issue: 2025-05-30 Date of Implementation: 2025-05-30 Older Standard (superseded by this standard): GB/T 33490-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 33490-2025: Basic requirements for exhibition construction service---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Basic requirements for exhibition construction service Basic requirements for exhibition engineering services ICS 91.180 CCS P 00 National Standard of the People's Republic of China Replaces GB/T 33490-2017 Released on 2025-05-30 2025-05-30 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface ... Ⅲ 1 Scope ... 1 2 Normative references ... 1 3 Terms and Definitions ... 1 4 General Requirements ... 1 4.1 Safety in production ... 1 4.2 Green and Environmental Protection ... 1 4.3 Foresight and Innovation ... 2 5 Service Capabilities ... 2 6 Service staff ... 2 6.1 General requirements 2 6.2 Requirements for Management Personnel ... 2 6.3 Technical Personnel Requirements 2 6.4 Requirements for implementation personnel 2 7 Service Process ... 2 7.1 General requirements 2 7.2 Planning ... 3 7.3 Design ... 3 7.4 Production ... 3 7.5 Build ... 4 7.6 Acceptance ... 4 7.7 Maintenance ... 4 7.8 Dismantling ... 4 7.9 Final Thoughts ... 4 8 Evaluation and Improvement ... 4 References ... 5ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 33490-2017 "Basic Requirements for Exhibition and Display Engineering Services". In addition to structural adjustments and editorial changes, the main The main technical changes are as follows. The terms and definitions have been changed, and the terms "contractor", "main contractor" and "special decoration contractor" have been deleted, and "exhibition display contractor" has been added. Engineering Enterprises” (see Chapter 3, Chapter 3 of the.2017 edition); a) The “basic requirements” are changed to “overall requirements”, which are subdivided into safety production, green environmental protection and forward-looking innovation requirements (see Chapter 4, Chapter 4 of the.2017 edition); b) Added "Service Capability" (see Chapter 5); c) Change “position requirements” to “service personnel” and subdivide them into management personnel, technical personnel and implementation personnel requirements (see Chapter 6, Chapter 6 of the.2017 edition); d) Changed "General Principles" to "General Requirements" and changed the requirements (see 7.1, 5.1 of the.2017 edition); e) Changed "preparation" to "planning" and changed the relevant requirements (see 7.2, 5.2 of the.2017 edition); f) Changed the requirements for the service processes such as "design", "production", "construction", "maintenance" and "dismantling" (see 7.3, 7.4, 7.5, 7.7, 7.8,.2017 version 5.3, 5.4, 5.5, 5.6, 5.7); g) Added service processes such as "acceptance" and "closing" (see 7.6 and 7.9); h) Change “service quality improvement” to “evaluation and improvement” (see Chapter 8, Chapter 7 of the.2017 edition). i) Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Standardization of Exhibition Industry (SAC/TC 348). This document was drafted by. Shenzhen Kaston Exhibition Co., Ltd., Beijing Huayi Oriental Exhibition Co., Ltd., Reed Huabo Exhibitions (Shenzhen) Co., Ltd., Xiamen Exhibition Jinhongxin Exhibition Co., Ltd., Beijing Deshibi Image Planning Co., Ltd., China Foreign Trade Center Group Co., Ltd., National Exhibition and Convention Center (Shanghai) Co., Ltd., China Council for the Promotion of International Trade Textile Industry Branch, China Post and Telecommunications Equipment Group Co., Ltd., East Best Lansheng Exhibition Group Co., Ltd., Shanghai International Exhibition (Group) Co., Ltd., Beijing Dianyi Space Exhibition Display Co., Ltd., Great Wall International Exhibition Co., Ltd., and Lingtong Exhibition Systems Co., Ltd. The main drafters of this document are. Qu Huiping, Zhang Zhou, Li Huarui, An Xiang, Jiang Chengwen, Lai Guoxiang, He Chunsheng, Xu Jiansheng, Wang Chen, Xu Yingxin, Pan Zhen, Zhou Wei, Gu Chunting, Lü Yugui, Peng Lu, Liu Yuguang, Chen Feng, Liang Pengcheng, Wang Lei, Zhang Jianwei, and Wang Yuanbin. The previous versions of this document and the documents it replaces are as follows. First published in.2017 as GB/T 33490-2017; - This is the first revision. - Basic requirements for exhibition engineering services1 ScopeThis document specifies the overall requirements, capability requirements, personnel requirements, service process, and evaluation and improvement aspects of exhibition and display engineering services. requirements. This document is applicable to the standardized management of exhibition display engineering services, and can also be used by exhibition organizers and exhibitors to evaluate and select exhibition display engineering services. Process services.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies. in this document. GB/T 19012 Quality Management Customer Satisfaction Organization Complaints Handling Guide GB/T 26165-2021 Terminology for Economic and Trade Exhibitions GB/T 41129-2021 Green Booth Evaluation Guide3 Terms and definitionsThe terms and definitions defined in GB/T 26165-2021 and the following apply to this document. 3.1 Exhibition construction In exhibition halls, museums and various commercial and public places, decoration engineering projects are built for the purpose of display and communication. [Source. GB/T 26165-2021, 3.4.9, modified] 3.2 Exhibition construction service The exhibition showcases a range of activities during the implementation of the engineering project. Note. Includes planning, design, production, construction, acceptance, maintenance, dismantling, and closing, etc. 3.3 Exhibition construction contractor An organization that provides exhibition and display engineering services. [Source. GB/T 37073-2018, 3.1]4 General requirements4.1 Safety in production Exhibition and display engineering enterprises should establish a safety production management system, assign safety responsibilities, comply with the safety management regulations of exhibition venues, Carry out safety inspection and supervision throughout the service process to ensure the safety of personnel and property. 4.2 Green and Environmentally Friendly Exhibition display engineering services should comply with GB/T 41129-2021 for green booth design, material selection, construction, display, maintenance, solid ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33490-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 33490-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33490-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33490-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 33490-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 33490-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
