GB/T 33260.5-2018 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33260.5-2018: Capability of detection -- Part 5: Methodology in the linear and nonlinear calibration cases
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33260.5-2018	359	Add to Cart	4 days	Capability of detection -- Part 5: Methodology in the linear and nonlinear calibration cases	Valid

Similar standards

GB/T 6379.6   GB/T 2828.2   GB/T 8170   GB/T 33260.3   GB/T 33260.4   GB/T 33260.2   

Basic data

Standard ID: GB/T 33260.5-2018 (GB/T33260.5-2018)
Description (Translated English): Capability of detection -- Part 5: Methodology in the linear and nonlinear calibration cases
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A41
Classification of International Standard: 03.120.30
Word Count Estimation: 18,181
Date of Issue: 2018-06-07
Date of Implementation: 2019-01-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 33260.5-2018: Capability of detection -- Part 5: Methodology in the linear and nonlinear calibration cases

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Capability of detection--Part 5. Methodology in the linear and nonlinear calibration cases ICS 03.120.30 A41 National Standards of People's Republic of China Detection ability part 5. Method for determining the detection limit of nonlinear calibration Part 5. Methodologyinthelinearandnonlinearcalibrationcases (ISO 11843-5.2008, MOD) Published on.2018-06-07 2019-01-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Precision profile function of the net state variable 3 5 Determination of the critical value of the net state variable and the minimum detectable value 4 5.1 General 4 5.2 Calculation based on probability α 5 5.3 Calculation based on probability β 5 5.4 Differential Method 5 6 Example 5 6.1 Overview 5 6.2 Transmission of uncertainty 6 6.3 Model fitting 8 6.4 Application to Competitive ELISA 8 Appendix A (Normative) Symbols and abbreviations in this section 10 Appendix B (informative appendix) Derivation of formula (9) 11 Appendix C (informative) Derivation of formula (13) 12

Foreword

GB/T 33260 "Detection Capability" is currently divided into the following sections. --- Part 1. Terminology and definitions; --- Part 2. Determination of the detection limit of linear calibration cases; --- Part 3. Method for determining the critical value of the response variable without calibration data; --- Part 4. Comparison of the minimum detectable value and the given value; --- Part 5. Determination of the detection limit of nonlinear calibration cases. This part is the fifth part of GB/T 33260. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the redrafting method to modify the use of ISO 11843-5.2008 "detection capability part 5. non-linear calibration situation detection limit Determination method. Compared with ISO 11843-5.2008, the main technical changes are as follows. ---About the normative reference documents, this part has made technical adjustments to apply to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory References”, and the specific adjustments are as follows. ● Replace ISO 3534-1 with GB/T 3358.1-2009 equivalent to international documents; ● Replace ISO 3534-2 with GB/T 3358.2-2009 equivalent to international documents; ● Replace ISO 3534-3 with GB/T 3358.3-2009 equivalent to international documents; ● Replace ISO 5725-1 with GB/T 6379.1-2004 equivalent to international documents; ● Replaced ISO 11843-1.1997 with GB/T 33260.1-2016 modified with international documents; ● Replace ISO 11843-2.2000 with GB/T 33260.2-2018 modified with international documents. This part is proposed and managed by the National Statistical Method Application Standardization Technical Committee (SAC/TC21). This section was drafted by. China National Institute of Standardization, Beijing University of Technology, Xiamen Optimization Technology Co., Ltd., Central University of Finance and Economics, China Liaoning Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Tianjin University, Tsinghua University, and CITIC Daika Co., Ltd. The main drafters of this section. Zhang Fan, Xie Tianfa, Zhao Jing, Fu Yao, Zhang Wei, Wang Haitao, Ding Wenxing, Wang Chengzhang, He Wei, Sun Jing, Huang Pu, Zhao Chao, Huang Liang.

Introduction

Both linear and nonlinear calibration functions will appear in the real world. This part of GB/T 33260 has two types in the scope of detection capability. The situation is handled uniformly by the probability distribution of the net state variables rather than by the calibration function itself. This section follows the basic concepts of GB/T 33260.2-2018, including the probability of making mistakes α and β, and linear calibration. in case The linear calibration function can be used in the value range of the base state value and the minimum detectable value, and is in combination with GB/T 33260.2-2018. Tolerance. When comparing an analytical method based on a linear calibration function with a method based on a nonlinear calibration function, it is recommended to use the method in this section. law. In the case of linear calibration, GB/T 33260.2-2018 and this part can be used. GB/T 33260.2-2018 only uses the response The precision profile function of the variable can be used to draw the same conclusions as this part, and this part requires both the response variable and the net state variable. The density profile function because the precision profile function of the response variable is the same as the precision profile function of the net state variable in the linear case. Detection capability part 5. Method for determining the detection limit of nonlinear calibration

1 Scope

This part of GB/T 33260 is mainly applicable to the case where the calibration function is non-linear and can also be used for linear cases. The basic methods given in this section are used to. --- Construct a precision profile function of the response variable, a function of the net state variable, using the standard deviation (SD) or variation of the response variable Different coefficient (CV) representation; --- Using the calibration function, the precision profile function of the response variable is transformed into the precision profile function of the net state variable; --- Use the precision profile function of the net state variable to estimate the critical value and the minimum detectable value of the net state variable. When the method given in GB/T 33260.2-2018 is not effective for the detection of various types of measurement methods (measurement equipment) The methods presented in this section are very useful when evaluating. This includes measuring the loop by competitive ELISA (enzyme-linked immunosorbent assay) Persistent organic pollutants (POPs, such as dioxin, pesticides and hormonal chemicals) and bacterial toxins that cause high fever. GB/T 33260.1-2016 and GB/T 33260.2-2018 describe the threshold value of the net state variable and the minimum detectable value Righteousness and applicability. This section extends the concept in GB/T 33260.2 to a non-linear calibration scenario. Both the critical value xc and the minimum detectable value xd are given in units of net state variables. If xc and x are defined based on the distribution of response variables Xd, then this definition should include a calibration function that transforms the response variable into a net state variable. The xc and xd defined in this section are based on the net shape The distribution of state variables is independent of the form of the calibration function. Therefore, this definition applies regardless of whether the function form is linear or non-linear. The calibration function should be continuous, divisible, and monotonically increasing or decreasing. This section further gives a description of how SD or CV is known only in the neighborhood of the smallest detectable value. Some examples are given in Chapter 6.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only dated versions apply. This document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3358.1-2009 Statistical vocabulary and symbols - Part 1. General statistical terms and terms for probabilities (ISO 3534-1.2006, IDT) GB/T 3358.2-2009 Statistical vocabulary and symbols - Part 2. Application statistics (ISO 3534-2.2006, IDT) GB/T 3358.3-2009 Statistical vocabulary and symbols - Part 3. Experimental design (ISO 3534-3..1999, IDT) GB/T 6379.1-2004 Accuracy of measurement methods and results (accuracy and precision) Part 1. General and definition (ISO 5725-1.1994, IDT) GB/T 33260.1-2016 Detection capability Part 1. Terms and definitions (ISO 11843-1.1997, MOD) GB/T 33260.2-2018 Detection capability Part 2. Methods for determining the ability to detect linear calibrations (ISO 11843-2. 2000, MOD)

3 Terms and definitions

GB/T 3358.1-2009, GB/T 3358.2-2009, GB/T 3358.3-2009, GB/T 6379.1-2004, ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33260.5-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33260.5-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33260.5-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33260.5-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.