GB/T 31410-2015 English PDF

US$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31410-2015: Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31410-2015	254	Add to Cart	3 days	Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings	Valid

Similar standards

GB/T 31586.1   GB/T 31586.2   GB/T 31416   GB/T 31411   GB/T 31409   

Basic data

Standard ID: GB/T 31410-2015 (GB/T31410-2015)
Description (Translated English): Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G50
Classification of International Standard: 87.040
Word Count Estimation: 13,156
Date of Issue: 2015-05-15
Date of Implementation: 2015-10-01
Quoted Standard: ISO 1513; ISO 3270; ISO 3696; ISO 15528
Adopted Standard: ISO 11998-2006, IDT
Regulation (derived from): National Standard Announcement 2015 No. 15
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the capability pollution agent moisture penetration of a coating scrub resistance and cleanability of accelerated test method for the determination to assess coating to resist abrasion effect caused by the repeated washing operation and tolerance. For the assessment of the coating can be cleaned, only requires evaluation methods, pollution does not specify the type of agent.

GB/T 31410-2015: Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings ICS 87.040 G50 National Standards of People's Republic of China Paints and varnishes coating moisture resistance and scrub May assess the cleanability (ISO 11998.2006, IDT) Issued on. 2015-05-15 2015-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with the international standard ISO 11998.2006 "Paints and varnish coating moisture resistance and cleanability scrub Assessment "to develop. Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528.2000, IDT); Laboratory use specifications and test methods (ISO 3696. 1987, MOD) --- GB/T 6682-2008 analysis; --- GB/T 9278-2008 paint sample conditioning and testing temperature and humidity (ISO 3270. 1984, IDT); --- GB/T 20777-2006 Paints and varnishes examination and preparation of samples (ISO 1513.1992, IDT). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee paint pigment (SAC/TC5) centralized. This standard was drafted. CNOOC Changzhou Paint Chemical Research Institute Co., Ltd., Nanjing Product Quality Supervision and Inspection Institute, Shenzhen Hirota loaded Decorative Group Co., Ltd., Guangzhou standard laboratory equipment Geda Goods Co., Ltd. Zhejiang Bo-chemical coating. The main drafters of this standard. Peng Jufang Liang Zhi, Li Shaojiang, Wang Chongwu, Wang Junrui. Paints and varnishes coating moisture resistance and scrub May assess the cleanability

1 Scope

This standard specifies a moisture coating scrub resistance and cleanability of accelerated test method to assess the measured resistance by the coating repeat the cleaning operation For the role and ability of abrasion resistance to pollution caused by penetration agent. For the assessment of the coating can be cleaned only provides evaluation method, unspecified pollution agent species. Note. Since these properties depend not only on the quality of the coating, but also with the substrate, construction method, drying conditions and other factors, the results thus obtained are not It can be directly converted to actual use. The standard is based on assessment of coating a substrate, a fixed application method prescribed under Article drying Wetware and regulations scrubbing method.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 1513 inspection and preparation of samples for paints and varnishes (Paintsandvarnishes-Examinationandpreparation ofsamplesfortesting) ISO 3270 Paints, varnishes and raw materials for conditioning and testing temperature and humidity (Paintsandvarnishesandtheirraw materials-Temperaturesandhumiditiesforconditioningandtesting) ISO 3696 for analytical laboratory use specifications and test methods (Waterforanalyticallaboratoryuse-Specification andtestmethods) ISO 15528 Paints, varnishes and raw materials for paints and varnishes - Sampling (Paints, varnishesandrawmaterialsfor paintsandvarnishes-Sampling)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Cleanability cleanability Dry film resist staining agents, and in the absence of penetration exceeds the thickness of the coating is removed can be removed by cleaning them Ability. 3.2 Scrub cycle scrubcycle Scrubbing pads in both directions within the scrub length of time to reciprocate. 3.3 Scrub length scrublength Stroke length plus the length of the scrubbing pads. 3.4 Stroke length strokelength Instrument through a stroke distance. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31410-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31410-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31410-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31410-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.