GB/T 31586.2-2015 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 31586.2-2015: Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 2: Cress-cut testing and X-cut testing Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 31586.2-2015: Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 2: Cress-cut testing and X-cut testing---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT31586.2-2015 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 87.040 G 50 GB/T 31586.2-2015 / ISO 16276-2.2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion / cohesion (fracture strength) of a coating - Part 2. Cross-cut testing and X-cut testing (ISO 16276-2.2007, IDT) Issued on: JULY 3, 2015 Implemented on: FEBRUARY 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 5 4 Principle... 6 5 Apparatus and materials ... 7 6 Procedure ... 7 7 Expression of results ... 11 8 Acceptance criteria ... 11 9 Test report ... 11 Annex A ... 13 Bibliography ... 14ForewordGB/T 31586 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating consists of the following two parts. - Part 1. Pull-off testing; - Part 2. Cross-cut testing and X-cut testing. This Part is the second part of GB/T 31586. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part uses translation method and identically adopts ISO 16276-2.2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2. Cross-cut testing and X-cut testing. The Chinese documents which have consistency with the international normative reference in this Part are as follows. - GB/T 30790.7-2014 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7. Execution and supervision of paint work (ISO 12944-7.1998, MOD) - GB/T 30790.8-2014 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8. Development of specification for new work and maintenance (ISO 12944-8.1998, MOD) This Part was proposed by China Petroleum and Chemical Industry Federation. This Part shall be under the jurisdiction of National Technical Committee on Paints and Pigments of Standardization Administration of China (SAC/TC 5). The drafting organizations of this Part. CNOOC Changzhou Paint and Chemicals Research Institute Co., Ltd., Guangzhou Synthetic Material Research Institute Co., Ltd., Nanjing Jinyuan Steel Coating Co., Ltd., AVIC Bermuda New Material Technology Engineering Co., Ltd., Zhejiang Yutong New Material Co., Ltd., Dongguan Daxing Chemical Co., Ltd.. Main drafters of this Part. Ji Junhong, Peng Jufang, Li Xin, Jin Weiping, Yang Zhenbo, Liang Xinfang, Zhou Xiaofeng. Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion / cohesion (fracture strength) of a coating - Part 2. Cross-cut testing and X-cut testing1 ScopeThis Part of GB/T 31586 specifies procedures for rating the resistance of coating systems when a cut in the form of a right-angle lattice pattern (cross- cut) or in the form of an X (X-cut) is made into the coating, penetrating through to the substrate. This Part is only applicable if the cross-cut or X-cut test method is specified, together with the rating from the appropriate rating scale. NOTE The characteristics of the coating can make the assessment of the result of a cross-cut or X-cut test difficult. This Part also specifies suitable equipment and defines inspection areas, sampling plans and acceptance/rejection criteria. This Part does not specify ratings for particular coating systems.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2409.2006 Paints and varnishes - Cross-cut test ISO 12944-7 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7. Execution and supervision of paint work ISO 12944-8 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8. Development of specifications for new work and maintenance ISO 19840 Paints and varnishes - Corrosion protection of steel structures ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 31586.2-2015 be delivered?Answer: The full copy PDF of English version of GB/T 31586.2-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 31586.2-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31586.2-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 31586.2-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 31586.2-2015?A step-by-step guide to download PDF of GB/T 31586.2-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 31586.2-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
