GB/T 3099.1-2008 English PDFUS$2154.00 ยท In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3099.1-2008: Terminology of fasteners -- Thread fasteners, pin and washer Status: Valid GB/T 3099.1: Historical versions
Basic dataStandard ID: GB/T 3099.1-2008 (GB/T3099.1-2008)Description (Translated English): Terminology of fasteners -- Thread fasteners, pin and washer Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J13 Classification of International Standard: 21.060.10 Word Count Estimation: 108,128 Date of Issue: 2008-08-25 Date of Implementation: 2009-02-01 Older Standard (superseded by this standard): GB/T 3099-1982 Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms fasteners. Unless otherwise specified in the product standard, recommended the use of this part of the (International Standard) given in English, French, Russian, Chinese, German, Italian, Spanish terminology and Swedish, Japanese. Fasteners terms listed. Does not currently have a corresponding ISO standards, mainly selected from the current national standard out, including some out of the product type (inventory using finished), so that these terms are standardized period. GB/T 3099.1-2008: Terminology of fasteners -- Thread fasteners, pin and washer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terminology of fasteners. Thread fasteners, pin and washer ICS 21.060.10 J13 National Standards of People's Republic of China Replacing GB/T 3099.1-1982 Fasteners term Threaded fasteners, pins and washers Posted 2008-08-25 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis section is one of the GB/T 3099 "Fasteners term" series. The series includes. a) GB/T 3099.1-2008 fasteners term threaded fasteners, pins and washers; b) GB/T 3099.2-2004 term blind rivet fasteners; This part identical with ISO /FDIS1891.2008 "fasteners term" (in English). This part of GB/T 3099 Part 1. This part of International Standard ISO /FDIS1891.2008 "Fastener term" agreement. This Part replaces GB 3099-1982 "bolts, screws, nuts and accessories - Terminology." Compared with GB 3099-1982 portion of the main changes are as follows. --- An increase of some terms; --- Increase Italian, Japanese, Spanish and Swedish terms; --- Modify some entries; --- Modify the Chinese, English, French, Russian and German code. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized. This section is responsible for drafting unit. Productivity Promotion Center in the machine. This part of the National Standardization Technical Committee Secretariat responsible for the interpretation of fasteners. This part of the standard replaces the previous editions are. --- GB/T 3099-1982. Fasteners term Threaded fasteners, pins and washers1 ScopeFasteners term GB/T 3099 this part of the guidance given to the translation work. Unless otherwise specified in the product standard, recommended The term in English, French, Russian, Chinese, German, Italian, Japanese, Spanish and Swedish part of this (international standard) is given. Fastener term listed, does not currently have the appropriate ISO standards, mainly selected from the current national standard out, but also package Including some out of the product type (using the stock finished), so that these terms are also standardized the same period. Only the basic pattern is a schematic view, in particular bolts, screws have structural elements specific details, such as 4.1.8. Note 1. In accordance with the requirements of ISO /T C2/SC7 subcommittee, Chinese, German, Italian, Japanese, Spanish, Swedish synonyms respectively, by Article China (SAC), Germany (DIN), Italy (UNI), Japan (JISC), Spain (AENOR), Sweden (SIS) responsible. Only three official ISO The term language (English, French, Russian) should be considered as ISO terms given. Note 2. The Russian term previously used to appear only in the release. Language order. zh. Chinese en. English fr. French ru. Russian de. German it. Italian ja. Japanese es. Spanish sv. Swedish Note 3. For ease of use, this section will be "Chinese term" column name listed first. Thread 2 Article number pattern name 2.1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3099.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 3099.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3099.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3099.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3099.1-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3099.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
