GB/T 30341-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30341-2025	RFQ	ASK	3 days	(Technical requirements for vehicle drivers training site)	Valid
GB/T 30341-2013	459	Add to Cart	4 days	Specifications of vehicle drivers training site	Valid

Basic data

Standard ID: GB/T 30341-2025 (GB/T30341-2025)
Description (Translated English): (Technical requirements for vehicle drivers training site)
Sector / Industry: National Standard (Recommended)
Date of Implementation: 2026-05-01
Older Standard (superseded by this standard): GB/T 30341-2013
Issuing agency(ies): State Administration for Market Regulation; Standardization Administration of China

GB/T 30341-2013: Specifications of vehicle drivers training site

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specifications of vehicle drivers training site ICS 03.220.20 R10 National Standards of People's Republic of China Motor vehicle driver training instructor course technical requirements Issued on. 2013-12-31 2014-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions Court 4 1 scale 5 field training program facilities, equipment and road conditions 1 6 office, teaching and service facilities 2 7 security conditions 3 8 3 Environmental conditions Appendix A (informative) motor vehicle driver training instructor course site area calculation 4 Appendix B (normative) coach field training program facilities configuration requirements 6 Annex C (normative) coach field training program facilities technical requirements 8

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by the Ministry of Transport of the People's Republic of China. This standard by the National Standardization Technical Committee on Road Transport (SAC/TC521) centralized. This standard is drafted by. Research Institute of Highway Ministry of Transport. Participated in the drafting of this standard. Jiangsu Provincial Department of Transportation Transportation Management Bureau, Anhui Province Road Transport Authority, the Sichuan Provincial Department of Transportation Road Transport Authority, Henan Province, Department of Transportation Road Transport Bureau, Chang'an University. The main drafters of this standard. Zeng Cheng, Cai Fengtian, Liu Jiaxin, Liu Li, Dou Moon, Yan Guoxiang, Wang Shengchang, Wei Yong, Shi Yi source, Gu Min, Yang Qi, zhang. Motor vehicle driver training instructor course technical requirements

1 Scope

This standard specifies the size of the site motor vehicle driver training instructor field, field training project facilities, equipment and road conditions, work, teach The basic requirements for learning and service facilities, safety conditions, environmental conditions and the like. This standard applies to motor vehicle driver training in the field of coaching.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 5768.2 traffic signs and road markings - Part 2. Road traffic signs GB 5768.3 traffic signs and road markings - Part 3. Road traffic markings GB 14886 road traffic lights setup and installation specifications Accessible design specification GB 50763 CJJ152 urban road intersections design procedures GA/T 963 traffic safety publicity and education facilities set norms JGJ100 garage building design JTGB 01 highway engineering standard

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Motor vehicle driver training instructor course vehicledriverstrainingsite Coaches provide space, equipment and other facilities for the motor vehicle driver trainees coach driver training places. Court 4 scale 4.1 Construction scale training ground vehicle driver training instructor course shall be determined in accordance with a predetermined scale training. Motor vehicle driver training Coach coach field site area calculation method, see Appendix A. The minimum size of 4.2 training motor vehicle driver training instructor course should reach at least 100 the total number of the coach car. Note. The total number of coach cars are not included in three cars, three-wheeled motorcycle ordinary, ordinary two motorcycles and other vehicles coach car. 5 field training program facilities, equipment and road conditions 5.1 site training program facilities 5.1.1 farm configuration coach training program and the total number of facilities shall meet the technical requirements of Appendix B and Appendix C requirements. Coach can field According to the actual need for training models of training, in accordance with the relevant requirements of the training program to add other facilities. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30341-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30341-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30341-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30341-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 30341-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 30341-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.