Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 30202.1-2013 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30202.1-2013: Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 30202.1-2013149 Add to Cart 2 days Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density Valid

Similar standards

GB/T 7702.7   GB/T 7702.6   GB/T 7702.8   GB/T 30202.4   GB/T 30202.5   GB/T 30202.3   

Basic data

Standard ID: GB/T 30202.1-2013 (GB/T30202.1-2013)
Description (Translated English): Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: D24
Classification of International Standard: 75.160.10
Word Count Estimation: 5,517
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the use of coal desulfurization and denitrification granular activated carbon (hereinafter referred to as active coke) bulk density measurement principles, procedures, and the results of calculation and so determined. This standard

GB/T 30202.1-2013: Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for granular coal-based activated carbon for desulfurization and denitration process Part 1.. Bulk density ICS 75.160.10 D24 National Standards of People's Republic of China Granular activated carbon coal quality test methods for desulfurization and denitrification Part 1. bulk density denitrationprocess-Part 1. Bulkdensity Issued on. 2013-12-31 2014-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 30202 "desulphurization and denitrification granular activated carbon from coal test method" is divided into five sections. --- Part 1. bulk density; --- Part 2. particle size; --- Part 3. abrasion resistance, compressive strength; --- Part 4. desulfurization value; --- Part 5. denitration rate. This section GB/T Part of 130,202. This section drafted in accordance with GB/T 1.1-2009 given rules. This section proposed and managed by China North Industries Group Corporation. This section is drafted. Shanxi Xinhua Chemical Co., Ltd. The main drafters of this section. Lei Xueqing, Li Bing, Chi Kwong Sau, LI Huai-beads, Yang Jing, Ni Ping, Li Ruomei. Granular activated carbon coal quality test methods for desulfurization and denitrification Part 1. bulk density

1 Scope

GB/T 30202 provisions of this part of the desulfurization and denitrification granular activated carbon from coal (hereinafter referred to as active coke) Determination of bulk density of the original Management, measurement procedures and results of the calculation and so on. This section applies to the determination of bulk density of activated coke.

2 Principle of Measurement

The sample was slowly poured into a graduated cylinder to 1000mL engraved lines, weighing activated coke quality, mass per unit volume of activated coke for the bulk density.

3 instruments and equipment

3.1 Balance, dividing the value of 0.1g. 3.2 cylinder, 1000mL. 3.3 sieve shaker speed 280r/min ~ 320r/min, round trip 25mm, this test does not use slap function.

4 Sample preparation and

4.1 The sample was reduced to about 2000g, placed in 150 ℃ ± 5 ℃ electric oven, the dried 2h, out into the cold dryer But spare. 4.2 Minimum aperture when the election of the sample size was measured using a sieve sieved 1min layer on a sieve shaker, to take part on the sieve spare.

5 measuring step

5.1 The sample was slowly poured into a graduated cylinder, 1000mL scale close-by grain added to 1000mL scale. 5.2 weighing sample quality, accurate to 0.1g.

6 calculated results

Bulk density ρ and its value in grams per liter (g/L) said, according to the formula (1). ρ = (1) Where. Numerical m --- sample mass, in grams (g); Numerical V --- sample volume in liters (L).
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30202.1-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30202.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30202.1-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30202.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.