GB/T 30104.210-2013 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30104.210-2013	RFQ	ASK	5 days	Digital addressable lighting interface -- Part 210: Particular requirements for control gears -- Sequencer (Device Type 9)	Obsolete

Similar standards

GB/T 24825   GB/T 9473   GB/T 32483.2   GB/T 30104.201   GB/T 30104.203   GB/T 30104.204   

Basic data

Standard ID: GB/T 30104.210-2013 (GB/T30104.210-2013)
Description (Translated English): Digital addressable lighting interface -- Part 210: Particular requirements for control gears -- Sequencer (Device Type 9)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K74
Classification of International Standard: 29.140.50; 29.140.99
Word Count Estimation: 76,753
Quoted Standard: GB/T 30104.101-2013; GB/T 30104.102-2013
Adopted Standard: IEC 62386-210-2011, IDT
Regulation (derived from): National Standards Bulletin No. 25 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the electronic control unit in the automatic mode of operation of the program digital signal control protocol and test procedures.

GB/T 30104.210-2013: Digital addressable lighting interface -- Part 210: Particular requirements for control gears -- Sequencer (Device Type 9)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Digital addressable lighting interface Part 210. Particular requirements for control gears Sequencer (Device Type 9) ICS 29.140.50; 29.140.99 K74 National Standards of People's Republic of China Digital addressable lighting interface - Part 210. Control Particular requirements for program means (device type 9) means Digitaladdressablelightinginterface-Part 210. Particularrequirementsforcontrolgear-Sequencer (devicetype9) (IEC 62386-210.2011, IDT) Issued on. 2013-12-17 2014-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅴ Introduction Ⅵ 1 Scope 1 2 Normative references 1 3 Terms and definitions Overview 4 1 5 Electrical Specifications 2 6 Interface Power 2 7 Structure 2 Transport Protocol 8 Timing 2 9 Run Method 2 10 variable declaration 6 11 directive defines 7 12 test program 14 References 69 1 run automatically processes the timing Example 5 Figure 2 Application extended configuration instruction process instance 9 Figure 3 "Physical Address Assignment" Test Process 15 Figure 4 "query feature" Test Process 16 Figure 5 "Set Point N" testing process 17 Figure 6 "is set - sent twice" Test Process 19 Figure 7 "Settings - Time-out" testing process 20 Figure 8 "is set - intermediate instruction 1" Test Process 22 Figure 9 "is set - 2 intermediate instruction" Test Process 24 10 "Copy point N" testing process 26 11 "Copy point N- send two" test process 28 12 "Copy point N- Timeout" test process 30 13 "Copy point N- intermediate instruction" Test Process 32 14 "Channel Select" Test Process 34 15 "Channel Select - sent twice/Time-out" testing process 35 16 "channel selection - intermediate instruction" Test Process 36 17 "Set Control N" test processes 37 18 "setting controls N- sent twice/Time-out" testing process 38 19 "setting controls N- intermediate instruction" Test Process 39 20 "Enable Device Type. Application extended instruction" Test Process 41 21 "Enable Device Type. application extended instruction set 1" Test Process 43 22 "Enable Device Type. application extended instruction set 2" Test Process 45 23 sub-processes "Setting Process" 46 24 "to the point N" testing process 47 25 "to the next point" Test Process 49 26 "before going to a little" testing process 50 27 "auto-running process" Test Process 51 28 "auto-running process" testing process timing 52 29 "auto-running process - pointer" Test Process 53 30 "auto-running process - the number of runs" Test Process 55 31 "auto-running process - with the instruction to stop" testing process 56 32 "program means performance" testing process 57 Figure 33 "program means performance" test template 58 34 "at point N - Run times" Test Process 59 35 "Reset program means" testing process 61 36 "Reset program means - sent twice/Time-out" testing process 62 37 "Reset program means - intermediate instruction" Test Process 63 38 "reset control N" test processes 65 39 "channel fault" Test Process 66 40 "extended version number query" Test Process 67 41 "extended instruction set aside the application of the" Test Process 68 Table 1 program means for storing variable 4 Table 2 programmer programming examples 5 Table 3 Variable declaration 6 Table 4 summarizes the application instruction set extensions 13 Parameters Table 5 "Set Point N" testing process 18 Table 6 "is set - sent twice" parameter testing process 19 Table 7 "Settings - Timeout" parameter test process 21 Table 8 - Parameters "intermediate instruction 1" Test Process 23 Table 9 "Settings - intermediate instruction 2" parameters of the test process 25 Table 10 Parameter 27 "Copy point N" testing process Table 11 "replication point N- send two" testing process parameters 29 Parameters Table 12 "replication point N- Timeout" testing process 31 Parameters Table 13 "replication point N- intermediate instruction" Test Process 33 Table 16 "channel selection - intermediate instruction" testing process parameters 36 Parameters Table 19 "setting controls N- intermediate instruction" Test Process 40 Parameters. "Application of the extended instruction enabled device type" testing process 42 Table 20 Table 21 "Enable Device Type. application extended command set 1" parameter testing process 44 Table 23 sub-process "setting process" parameter 46 Parameters Table 24 "to the point N" testing process 48 Table 27 "auto-running process" testing process parameters 51 Table 29 "automatic operation mode - pointer" testing process parameters 54 Table 30 "Automatic running processes - the number of runs" testing process parameters 55 Table 31 "auto-running process - with the instruction to stop" testing process parameters 57 Table 34 "starting point N - number of runs" testing process parameters 60 Parameters - "intermediate instruction resets the program means" testing process 64 Table 37 Parameters Table 39 "channel fault" testing process 67 Table 41 "extended instruction set aside the application of" testing process parameters 68

Foreword

GB/T 30104 "Digital Addressable Lighting Interface" is divided into 13 parts. --- Part 101. General requirements for systems; --- Part 102. General requirements for the control device; --- Part 103. General requirements for control equipment; --- Part 201. control means special requirements for fluorescent lamps (device type 0); --- Part 202. Particular requirements for control device can accommodate Emergency lighting (device type 1); --- Part 203. Particular requirements for control of discharge lamps (excluding fluorescent lamps) (device type 2); --- Part 204. control means special requirements for low-voltage halogen lamps (device type 3); --- Part 205. Particular requirements for control power supply voltage controller for incandescent lamps (device type 4); --- Part 206. Particular requirements for digital signal control device into a DC voltage (device type 5); --- Part 207. control means special requirements of LED modules (device type 6); --- Part 208. control means special requirements for the switching function (device type 7); --- Part 209. control means special requirements for color control (device type 8); --- Part 210. control program means a special device requirements (device type 9). This section GB/T Part of 21,030,104. This section drafted in accordance with the rules of GB/T 1.1-2009 and GB/T 20000.2-2009 given. This section uses the translation method identical with IEC 62386-210.2011 "Digital addressable lighting interface - Part 210. control means Particular requirements for program means (device type 9). " This part is proposed by the China National Light Industry Council. This part of the National Electric lighting Standardization Technical Committee (SAC/TC224) centralized. This section is drafted. Hangzhou heyday Technology Instrument Co., Ltd., Suzhou Bao Lai Thai Union Optical Co., Ltd. in Hangzhou for Optoelectronic Technology Unit Parts Limited, Foshan City, China Electrical Lighting Co., Ltd., Shenzhen City electric lighting Co., Ltd., Guangdong KAILESI Optoelectronics Technology Co., The company, Dongguan City yuan Optoelectronics Technology Co., Ltd., Beijing Institute of electric light. Drafters of this section. HOU Min Yin, Wuyuan Hui, Zhang Yingchun, Zhang 5296 District Yang Zhi, Song, the Ng Wing-lok, Li Jinhong, Jiang Shan, Duan Yan Fang, Zhao Xiurong.

Introduction

This section will be published simultaneously with the GB/T 30104.101 and GB/T 30104.102. The GB/T 30104 is divided into several parts published separately For future amendments and revisions. If necessary, add additional requirements. When referring to GB/T 30104.101 or GB/T within 30104.102 any provisions of this section and the composition of GB/T 30104.2 ×× Department Other parts of the column clearly defines the order in terms of scope and testing. If necessary, this section includes additional requirements. group To GB/T 30104.2 ×× all parts of the series are independent, and therefore does not contain references to each other. Requires that any provisions of GB/T 30104.101 or GB/T 30104.102 in this section to "in accordance with GB/T 30104.101 first 'N' chapter of the requirements, "a reference to the form of the sentence, the sentence could be interpreted as all requirements related to the provision of Section 101 or Section 102 are But it does not apply to Part 210 except the control device contains a particular type of lamp. Unless otherwise stated, figures in this section are used in the decimal. Hexadecimal numbers using 0xVV format, several of which VV value. Binary digits or using XXXXXXXXb XXXXXXXX format, wherein X is 0 or 1; "x" means "not in binary For consideration. " Digital addressable lighting interface - Part 210. Control Particular requirements for program means (device type 9) means

1 Scope

GB/T 30104 provisions of this part of the electronic control unit and a digital signal control protocol test in automatic program mode program.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 30104.101-2013 digital addressable lighting interface - Part 101. General requirements for systems (IEC 62386-101. 2009, IDT) GB/T 30104.102-2013 digital addressable lighting interface - Part 102. General requirements for control devices (IEC 62386- 102.2009, IDT)

3 Terms and Definitions

GB/T 30104.101-2013 and GB/T 30104.102-2013 defined and the following terms and definitions apply to this document. 3.1 Multi-channel devices multichanneldevice Equipment with more than one light source output controller. Note. The same output may have different states at the same time. 3.2 Point point Logic state program fade time means, including holding time of each channel and the size of the arc power. NOTE. Fade time program means the end, it means that this point is reached. 3.3 After point nextpoint The current process point next point. 3.4 Before the point previouspoint A point before the current point in the process. 3.5 Pointer pointer A counter, used to refer to the starting point of the process. NOTE. For this purpose, the counter may be a scene or a system failure or power rating classes 0 to 15 scenes.

4 Overview

According to GB/T 30104.101-2013 Chapter 4 GB/T 30104.102-2013 Chapter 4 requirements. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30104.210-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30104.210-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30104.210-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30104.210-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.