GB/T 30104.207-2025 English PDFUS$354.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 30104.207-2025: Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6) Status: Valid GB/T 30104.207: Historical versions
Basic dataStandard ID: GB/T 30104.207-2025 (GB/T30104.207-2025)Description (Translated English): Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140.50 Word Count Estimation: 18,114 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 30104.207-2013 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 30104.207-2025: Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT30104.207-2025 ICS 29.140.50 CCSK74 National Standard of the People's Republic of China Replaces GB/T 30104.207-2013 Digital Addressable Lighting Interface Part 207.Control Particular requirements for devices LED modules (device type 6) (IEC 62386-207.2018, IDT) Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General Requirements 2 5 Electrical Specifications 2 6 Interface power 2 7 Transmission Protocol Framework 2 8 Time Series 2 9 Operation Method 2 10 Variable Declaration 6 11 Instruction Definition 7 Reference 11 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 207 of GB/T 30104 Digital Addressable Lighting Interface. GB/T 30104 has been published in the following parts. --- Part 101.General requirements for system components; --- Part 102.General requirements for control devices; --- Part 103.General requirements for control equipment; --- Part 104.General requirements for wireless and other wired system components; --- Part.201.Particular requirements for control gear for fluorescent lamps (equipment type 0); --- Part 202.Particular requirements for control devices Self-contained emergency lighting (equipment type 1); --- Part 203.Particular requirements for control gear for discharge lamps (other than fluorescent lamps) (equipment type 2); --- Part 204.Particular requirements for control gear for low-pressure tungsten halogen lamps (equipment type 3); --- Part 205.Particular requirements for control gear for incandescent lamp supply voltage controllers (equipment type 4); --- Part 206.Particular requirements for control devices converting digital signals into DC voltage (equipment type 5); --- Part 207.Particular requirements for control gear LED modules (equipment type 6); --- Part 208.Particular requirements for control devices switching functions (equipment type 7); --- Part 209.Particular requirements for control devices Color control (equipment type 8); --- Part 220.Particular requirements for control devices - Central power supply emergency operation (device type 19); --- Part 222.Particular requirements for control devices heat lamp protection (device type 21); --- Part 301.Special requirements for input device buttons; --- Part 302.Special requirements for input devices, absolute input devices; --- Part 303.Special requirements for input device occupancy sensors; --- Part 304.Special requirements for input devices light sensors. This document replaces GB/T 30104.207-2013 "Digital addressable lighting interface Part 207.Particular requirements for control devices" Compared with GB/T 30104.207-2013, in addition to structural adjustments and editorial changes, the main technical The changes are as follows. a) The scope of the document has been changed (see Chapter 1, Chapter 1 of the.2013 edition); b) Changed the fast fade time (see 9.2, 9.2 of the.2013 edition); c) Deleted some instructions (see Chapter 11 of the.2013 edition); d) The test procedures and algorithm examples (see Chapter 12 and Appendix A of the.2013 edition) have been deleted. This document is equivalent to IEC 62386-207.2018 "Digital addressable lighting interface Part 207.Particular requirements for control gear" Requesting LED module (device type 6) This document was proposed by the China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lighting Appliances (SAC/TC224). This document was drafted by. Hongyibai Lighting Co., Ltd., Foshan Electric Lighting Co., Ltd., Huarong Lighting Co., Ltd., Electric Light Source Quality Supervision and Inspection Center (Beijing), Jiangsu Yashi Lighting Group Co., Ltd., Jiangsu Xingkang Optoelectronics Technology Co., Ltd., Guangdong Song Sheng Power Technology Co., Ltd. and Beijing Electric Light Source Research Institute Co., Ltd. The main drafters of this document are. Wang Quansen, Huang Xi, He Jintian, Liu Yiyao, Yin Jinxing, Jing Wei, and Wang Shengli. The previous versions of this document and the documents it replaces are as follows. ---First published in.2013 as GB/T 30104.207-2013; ---This is the first revision.introductionGB/T 30104 (all parts) specifies a bus system for controlling electronic lighting equipment through digital signals, which is intended to consist of the following Partial composition. Part 103 specifies the general requirements for control devices. Part 104 specifies the general requirements for control equipment. General requirements for wireless and alternative wired system components. Part 105 specifies general requirements for firmware upgrades. Part 150 The requirements for auxiliary power supplies are given. Auxiliary power supplies can be independent or built into the control device or control equipment. Particular requirements for controlgear for certain types of luminaires. Special requirements for each type of input device. GB/T 30104 is published as a series of standards divided into several parts to facilitate future revision and amendment, and to add new parts when necessary. Other requirements. The structure and relationship of the series of standards are shown in Figure 1 as follows. Figure 1 Overview of GB/T 30104 The scope of application of this clause. Other sections also include additional requirements when necessary. except. The standardization of control interface of control device aims to achieve compatibility between electronic control device and lighting control equipment. This document describes a method for implementing a control device in a building management system. Unless otherwise specified, all numbers used in this document are decimal. Hexadecimal numbers are given in the format 0xVV. The "x" in the number means "any value". Use the following typographical expressions. Variable. "variable name" or "variable name[3.0]" only gives the 3rd to 0th digits of the variable name. The range of values is. [minimum, maximum]. Command. "command name". Digital Addressable Lighting Interface Part 207.Control Particular requirements for devices LED modules (device type 6)1 ScopeThis document specifies the electrical specifications, interface power supply, transmission protocol framework structure of the bus system for controlling electronic lighting equipment through digital signals. The system complies with the requirements of IEC 61347 (all parts) and has a DC power supply. This document is only applicable to control devices related to LED modules in GB/T 30104.102-2025. NOTE. Requirements for testing individual control devices during production are not included.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. IEC 62386-102.2014 Digital addressable lighting interface Part 102.General requirements for control gear IEC 62386-102.2014/AMD1.2018 Note. GB/T 30104.102-2025 Digital addressable lighting interface Part 102.General requirements system components (IEC 62386-102.2022, IDT) IEC 62386-216 Digital addressable lighting interface Part 216.Particular requirements for control gear Load reference (device type IEC 62386-217 Digital addressable lighting interface Part 217.Particular requirements for control gear Thermal protection of devices (equipment type IEC 62386-218.2018 Digital addressable lighting interface Part 218.Particular requirements for control gear Dimming curve selection IEC 62386-222 Digital addressable lighting interface Part 222.Particular requirements for control gear Thermal lamp protection (device type Note. GB/T 30104.222-2025 Digital addressable lighting interface Part 222.Particular requirements for control gear Heat lamp protection (equipment type 21) (IEC 62386-222.2018, IDT) IEC 62386-224 Digital addressable lighting interface Part 224.Particular requirements for control gear Non-replaceable light sources (devices3 Terms and DefinitionsFor the purposes of this document, the terms and definitions defined in IEC 62386-102 apply. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30104.207-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 30104.207-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 30104.207-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30104.207-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 30104.207-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 30104.207-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
