GB/T 30069.2-2016 English PDF

US$379.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30069.2-2016: Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30069.2-2016	379	Add to Cart	4 days	Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems	Valid

Similar standards

GB/T 34487   GB/T 31930   GB/T 29459.2   GB/T 45169   GB/T 30064   GB/T 30069.1   

Basic data

Standard ID: GB/T 30069.2-2016 (GB/T30069.2-2016)
Description (Translated English): Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H22
Classification of International Standard: 77.040.10
Word Count Estimation: 19,119
Date of Issue: 2016-02-24
Date of Implementation: 2016-11-01
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 30069.2-2016: Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metallic materials - Tensile testing at high strain rates - Part 2. Servo-hydraulic and other test systems ICS 77.040.10 H22 National Standards of People's Republic of China Metallic materials - High strain rate tensile test Part 2. Hydraulic servo type and others Type test system Part 2. Servo-hydraulicandothertestsystems (ISO 26203-2..2011, MOD) 2016-02-24 released 2016-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I Introduction II 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 symbol 1 5 Principle 3 6 equipment 3 7 Sample 3 8 Test procedure 4 9 Experimental evaluation 6 10 Test Report 8 Appendix A (informative) Test equipment 9 Appendix B (informative) sample size example 11 Appendix C (informative) Engineering stress - strain curve example 13 Reference 14

Foreword

GB/T 30069 "metal material high strain rate tensile test" is divided into two parts. - Part 1. Elastic rod system; - Part 2. Hydraulic servo type and other types of test systems. This part is part 2 of GB/T 30069. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part uses the re-drafting method to modify ISO 26203-2..2011 "High Strain Rate Tensile Test for Metallic Materials Part 2. Hydraulic servo type and other types of test system ". The technical differences between this section and ISO 26203-2..2011 are as follows. - In GB/T 228.1 instead of ISO 6892-1 in Chapter 2, "Normative references", to meet the technical conditions of our country (see paragraph Chapter 4, Chapter 5, Chapter 7 and Chapter 9); This part also made the following editorial changes. - Added in Chapter 6 "Note. When using the pendulum system, refer to Appendix D in GB/T 30069.1-2013; --- delete the symbol SD and the description that did not appear in Table 1; - to modify Chapter 1 "scope"; - Reorder the references. This part is made by China Iron and Steel Industry Association. This part is headed by the National Steel Standardization Technical Committee (SAC/TC183). This part of the drafting unit. Baoshan Iron and Steel Co., Ltd., Metallurgical Industry Information Standards Institute, Shenzhen million test Equipment Co., Ltd.. The main drafters of this part. Fang Jian, Zhou Yidong, Dong Li, An Jianping, Hou Jie.

Introduction

Many engineering materials exhibit a positive correlation with the strain rate during deformation to plastic failure, ie, with loading strain The yield strength of the material and the failure (fracture) strain are also increased. As a result of numerical simulation method can effectively reduce the impact on the car Hit this high-cost long-term test of the demand, so access to material performance with the relevant rate of information on the impact of the reliability of the car structure Evaluation is very important. The numerical simulation of the type of collision is required to obtain the stress-strain curve of the material at higher strain rate line. According to GB/T 228.1 only quasi-static tensile results of the material, that is, the strain rate is less than or equal to 0.008s-1, the strain rate The rate does not apply to the actual deformation behavior of the component material above the quasi-static strain rate. Metallic materials - High strain rate tensile test Part 2. Hydraulic servo type and others Type test system

1 Scope

This part of GB/T 30069 specifies the use of hydraulic servo type and other types of test system for metal materials to carry out high strain rate pull Extension of the test method. This section only provides examples of flat samples, the same can be used other geometric size of the sample. This part applies to the strain rate of 10-2s-1 ~ 103s-1, the test temperature is 10 ℃ ~ 35 ℃, unless otherwise specified, the use of hydraulic Servo type test system for tensile test. Note. When the strain rate is less than 10-2s-1, a tester specially designed for quasi-static test types can be used.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 228.1-2010 Metallic materials - Tensile tests - Part 1. Room temperature test methods (ISO 6892-1..2009, MOD)

3 terms and definitions

GB/T 228.1-2010 Definitions of terms and definitions apply to this document.

4 symbols

GB/T 228.1-2010 and the symbols, units and instructions given in Table 1 apply to this document. Table 1 symbols and descriptions Symbol Unit Description Sample a0 mm The original thickness of the plate sample b0 mm The original width of the parallel length of the plate specimen bk mm The width of the specimen holder L0 mm The original gauge length Lc mm parallel length Le mm extensometer gauge length r mm transition arc radius S0 mm2 parallel length original cross-sectional area time ts time ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30069.2-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30069.2-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30069.2-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30069.2-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.