GB/T 29555-2013 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29555-2013: Test method of operating forces for doors
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29555-2013	189	Add to Cart	3 days	Test method of operating forces for doors	Valid

Similar standards

GB/T 38264   GB/T 38388   GB/T 34555   GB/T 30661.10   GB/T 30661.11   GB/T 30595   

Basic data

Standard ID: GB/T 29555-2013 (GB/T29555-2013)
Description (Translated English): Test method of operating forces for doors
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P32
Classification of International Standard: 91.060.50
Word Count Estimation: 8,895
Quoted Standard: GB/T 5823-2008
Adopted Standard: ISO 9379-2005, MOD
Regulation (derived from): National Standards Bulletin 2013 No. 10
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the determination of the door opening and closing, with lock and key or handle the force required to open the Hardware Test methods. This standard applies to manually operated locking device with a flat opening and sliding pedestri

GB/T 29555-2013: Test method of operating forces for doors

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of operating forces for doors ICS 91.060.50 P32 National Standards of People's Republic of China Test Method for opening and closing force of the door (ISO 9379.2005, Operatingforces-Testmethod-Doors, MOD) Issued on. 2013-07-19 2014-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted law revision using ISO 9379.2005 "Test methods force the door open and close." This standard and ISO 9379.2005 as compared to the technical differences and their causes. on normative references, with this standard GB/T 5823-2008 instead of prEN12519.1996, in order to adapt to China's technical conditions. This standard and ISO 9379.2005 as compared to the structure has been adjusted, specific adjustments are as follows. --- ISO 9379.2005 Mount paragraph in Chapter 5 of this standard adjustment 5.1, 5.1 and 5.2 of the original is adjusted to 5.2 and 5.3; --- ISO 9379.2005 Mount paragraph in Chapter 8 of the cancellation, the content is adjusted to 8.1 and 8.2 of this standard. The standard proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China. This standard by the national building curtain wall windows and doors Standardization Technical Committee (SAC/TC448) centralized. This standard is drafted by. Guangdong Provincial Academy of Building Research. Participated in the drafting of this Standard. China Academy of Building Research, China Building Materials Inspection and Certification Center, Guangdong Kin Long Hardware Shares Ltd., Shenzhen Johor Bahru Curtain Technology Consulting Co., Ltd., the National Building Materials Industry Building Hardware Plumbing Products Quality Supervision and Testing Center, Shanghai Jianke Inspection Ltd., Guangzhou Aluminium Decoration Engineering Company Limited, Guangdong Hopewell Construction Hardware Co., Ltd., Zhongshan Shengxing Co., Ltd., Guangdong record high walls and windows Engineering Co., Ltd., Fujian Nanping Aluminum Co., Ltd., Shenzhen Tairan construction industry Co., Ltd., Beijing Jiayu Fenestration Co., Ltd., Wuhan Hong Kong and Technology Co., Ltd.. The main drafters of this standard. on the fly Tan, Lai Yande, stone Man Cheung, Wang Hongtao, Liu Haibo, DU Ji Yu, Duwan Ming, Deng Guizhi, Xu Qin, Ken Kuo Li, Liu Xuelin, Jiang Qinghai, Chen Jinrong, Xie Guangyu, Su Shu, Su Hongbo, Xu Wei and. Test Method for opening and closing force of the door

1 Scope

This standard specifies the opening and closing, or handle with a key lock and open the Hardware-Test Method for measuring the force required door. Casement and sliding This standard applies to manual operation of the locking device with the opening in the form of pedestrian doors. This standard does not apply to equipped with automatic shut-off device measuring the closing force of the door, does not apply to special hardware is equipped with accessories such as emergency opening Door open device. Note. Some hoisting force window with locking device also Keyijuben standards for testing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5823-2008 term building windows and doors

3 Terms and Definitions

Terms and definitions of the door as well as the following terms and definitions GB/T 5823-2008 defined apply to this document. 3.1 Junction attachmentpoint Only use a door handle, a connection point to take in a spot near the handle. Handle more than one time, at the junction take the ends of the two handle An intermediate position.

4 Test principle

Determination of the locking and unlocking hardware accessories (lock, handle, etc.), sliding doors or swing fan starts to open and fully closed position to lock or security Full means all of the required minimum force or torque when locking.

5 Test Equipment

Test apparatus comprises a support frame, with the factory supplied or specified anchor the test piece fixed to the support frame. The supporting frame It should have sufficient rigidity to ensure that its deformation does not affect the test results. Test equipment should be able to provide uniform force, each incremental level of not more than 1.0N, and does not vibrate. The test equipment weight pulley means (for example in Figure A.1 in Appendix A and Appendix B in Figure B.1) composition may also be used smoothly Devices (other spring-like device) the applied force or torque. Test apparatus also comprises a measuring and recording device, accuracy of 5%. 5.1 weight pulley Weights can be applied by a string and pulley force simultaneously. As shown in Figure A.1 and B.1. String diameter, stiffness and weight of the test results should not have a significant effect. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29555-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29555-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29555-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29555-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.