GB/T 29521-2013 English PDF

US$529.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29521-2013: Safety specification for underground mining of tungsten mine
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29521-2013	529	Add to Cart	4 days	Safety specification for underground mining of tungsten mine	Valid

Similar standards

YS/T 1543   GB/T 33785   GB/T 31935   GB/T 29520   GB/T 29522   GB/T 29519   

Basic data

Standard ID: GB/T 29521-2013 (GB/T29521-2013)
Description (Translated English): Safety specification for underground mining of tungsten mine
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H09
Classification of International Standard: 13.100
Word Count Estimation: 23,229
Quoted Standard: GB 2894; GB 6722; GB/T 13869; GB 14161; GB 16423; GB 18218; GB/T 28001-2001; GB 50070; GB 50630; AQ/T 9002
Regulation (derived from): National Standards Bulletin 2013 No. 9
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the safety of underground mining of tungsten production organization and management, goal management, education and training, design, construction, manufacturing, emergency management, security, reporting and statistical analysis i

GB/T 29521-2013: Safety specification for underground mining of tungsten mine

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety specification for underground mining of tungsten mine ICS 13.100 H09 National Standards of People's Republic of China Tungsten underground mining production safety norms Issued on. 2013-06-09 2014-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅴ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 General 2 Organization and management of production safety 2 4.1 4.1.1 Safety Committee 2 4.1.2 professional production safety management 2 4.2 Safety Objective Management 2 4.2.1 establish safety production target of 2 4.2.2 Safety Objective 2 Implementation 4.3 Production Safety Regulations and System 2 4.3.1 Production safety regulations 2 4.3.2 Production Safety System 3 4.4 safety education and training 3 4.5 Production Process Safety Management System 3 4.5.1 Production Support System 3 4.5.2 Change Management 4 4.6 Downhole safety exits and walkways 4 4.6.1 mine safety exit 4 4.6.2 walkways 4 4.7 Safety equipment and facilities management 4 4.7.1 Basic requirements 4 4.7.2 Equipment Safety Management 4 4.7.3 Facility Security Management 4 4.8 Chamber roadway and safety requirements 5 4.9 Downhole lighting and safety signs 5 4.9.1 Underground lighting 5 4.9.2 Safety signs 5 4.10 Security Monitoring and Communication 5 4.10.1 Safety Monitoring 5 4.10.2 Communication 6 4.11 Hazard Identification and Risk Assessment 6 4.11.1 Hazard Identification 6 4.11.2 Risk Assessment 6 5 production process safety requirements 6 5.1 MINING DESIGN safety requirements 6 5.2 Mining process safety requirements 6 5.2.1 General requirements 6 5.2.2 job preparation before 7 5.2.3 Drilling 7 5.2.4 Blasting 7 5.2.5 Ventilation 7 5.2.6 Dust 7 5.2.7 Roof Support and Management 8 5.2.8 Underground and Promotion 8 5.2.9 goaf managed 8 5.2.10 pressed Safety Management 8 5.2.11 safety inspection and rectification 8 6 Occupational Health Management 9 6.1 Occupational Protection 9 6.2 Occupational Health Monitoring 9 6.3 Occupational Hazard Control 9 6.4 Occupational Health Surveillance 9 Occupational injury insurance 6.5 9 7 Safety Emergency Management 10 7.1 Emergency Plan and Emergency Management 10 7.1.1 Emergency Plan 10 7.1.2 Emergency Management 10 7.2 Emergency Preparedness and identified 11 7.2.1 Emergency Preparedness 11 7.2.2 Emergency identified 11 7.3 Emergency Organization and Program 11 11 7.3.1 Emergency Organization 7.3.2 Emergency Program 11 7.4 Security and Emergency Measures 11 7.4.1 Communication and Information 11 7.4.2 aid device 11 7.4.3 Rescue HR 11 7.4.4 Emergency funding 11 12 7.4.5 Medical Resources 7.4.6 Transportation Resources 12 7.5 emergency training and drills 12 12 7.5.1 Emergency Training 7.5.2 emergency drill 12 7.6 Emergency Assessment and rectification 12 8 and safety technology and to ensure funding for the use of 12 8.1 Safety Science and Technology 12 8.2 security to ensure funding and use 12 9 Security Incident Reporting and Statistical Analysis 13 13 9.1 Security Incident Reporting 9.2 Security Statistics and Analysis 13 9.3 Safety Evaluation 13

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Ganzhou Nonferrous Metallurgy Research Institute, Jiangxi Province Science and Technology Center for Security Studies. The main drafters of this standard. Liu Bolu, Xieshi Yong, Li harbor, Pan Jianzhong, with Huang Lin, Long Qing Ji, Fu Huimin, Zhang Hu, Xiong Anping. Tungsten underground mining production safety norms

1 Scope

This standard specifies the underground mining of tungsten mine production safety organization and management, goal management, education and training, design, construction, production, emergency During the basic requirements management, security, reporting and statistical analysis. This standard applies to tungsten mining enterprises. This standard does not apply to deposits in liquid, possession of open-pit mine, coal or coal to generate total deposits, brick clay and sand mining and other mine opening Mining enterprises.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 2894 Safety Signs and use guidelines GB 6722 Blasting Safety Regulations GB/T 13869 Electrical Safety Guidelines GB 14161 Mine Safety Signs GB 16423 metal and nonmetal mine safety rules GB 18218 hazardous chemicals major hazard identification GB/T 28001-2001 Occupational Health and Safety Management System GB 50070 Mine design of electric power GB 50630 fire protection engineering design non-ferrous metal AQ/T 9002 production units of production safety accident emergency response plan guidelines

3 Terms and Definitions

GB/T 28001-2001 define the following terms and definitions apply to this document. For convenience, the following repeating lists GB/T 28001-2001 of certain terms and definitions. 3.1 Tungsten Mines tungstenmine In the modern technical and economic conditions, it can be extracted on a commercial scale national economy required tungsten ore and other associated minerals mining enterprise. 3.2 Safety Objective Management safetymanagementbyobjectives In modern management theory as the basis, system theory as a guide to the scientific method as a means, in accordance with the overall objective of tungsten mine production and operation Superior production safety requirements established by the various levels of production and safety goals, and longitudinal and lateral communication and coordination, as far as possible with the personal vision Enterprise total production safety goal is the same, forming a network system security objectives. 3.3 Six systems sixsystems Underground metal and nonmetal mine safety hedge "Six Systems" refers to the monitoring and control system, underground personnel positioning system, emergency system, ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29521-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29521-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29521-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29521-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.