GB/T 29469-2024 English PDFUS$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29469-2024: Cleanrooms and associated controlled environments - Evaluation of performance and rationality Status: Valid GB/T 29469: Historical versions
Basic dataStandard ID: GB/T 29469-2024 (GB/T29469-2024)Description (Translated English): Cleanrooms and associated controlled environments - Evaluation of performance and rationality Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C70 Word Count Estimation: 20,257 Date of Issue: 2024-08-23 Date of Implementation: 2024-08-23 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 29469-2024: Cleanrooms and associated controlled environments - Evaluation of performance and rationality---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. National Standard of the People's Republic of China ICS 13.040.35CCS C 70 Cleanrooms and related controlled environments Performance and rationality evaluation Cleanrooms and associated controlled environments- 2024-08-23 Release 2024-12-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Replaces GB/T 29469-2012 Table of ContentsPreface Ⅲ Introduction Ⅳ 1 Scope...1 2 Normative references ...1 3 Terms and Definitions 1 4 General requirements 2 5 Evaluation content...2 6 Evaluation conclusion and grade 5 7 Evaluation Report...5 Appendix A (Informative) Technical indicators and test methods 6 Appendix B (Informative) Design Document Contents 7 Appendix C (Informative) Recommended evaluation limits 8 References ...10ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 29469-2012 "Performance and rationality evaluation of clean rooms and related controlled environments" and is consistent with GB/T Compared with 29469-2012, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The scope of application has been changed (see Chapter 1, Chapter 1 of the.2012 edition); b) The definition of the term “monitoring” has been changed (see 3.5, 3.9 of the.2012 edition); c) Deleted the terms performance and reasonableness evaluation (see 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.10, 3.11, 3.13, 3.14 and 3.15); d) Added terms such as controlled environment, clean room and related controlled environment, verification, enclosure, etc. (see 3.1, 3.2, 3.3 and 3.4); e) Change “evaluation and project progress linkage and procedures” to “general requirements” (see Chapter 4, Chapter 4 of the.2012 edition); f) The “Evaluation Content” has been changed (see Chapter 5, Chapter 5 of the.2012 edition); g) Added “Evaluation Conclusion and Grade” (see Chapter 6); h) Added “Evaluation Report” (see Chapter 7); i) The “Evaluation Form” has been deleted (see Appendix A of the.2012 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Standardization of Clean Rooms and Related Controlled Environments (SAC/TC 319). This document was drafted by. China Power Investment Engineering Research, Testing and Assessment Center Co., Ltd., China Electronics Engineering Design Institute Co., Ltd., China National Standardization Association, Jiangsu Sujing Engineering Construction Co., Ltd., Suzhou Antai Air Technology Co., Ltd., China Academy of Engineering Physics Laser Polymerization Co., Ltd. Transformation Research Center, China Electronics System Engineering Second Construction Co., Ltd., Harbin Institute of Technology, China Academy of Building Research Co., Ltd., Suzhou Hongji Clean Technology Co., Ltd., Beijing Satellite Environmental Engineering Research Institute, China Electronics Jingtai Electronic Engineering Co., Ltd., China People's Liberation Army PLA Air Force Special Medical Center, Jianke Environmental Energy Technology Co., Ltd., Zhejiang Huayuan Environmental Engineering Co., Ltd., Suzhou Indel Indoor Air Technology Co., Ltd. Technology Co., Ltd., Foshan Mingxuan Medical Construction Intelligent Manufacturing Technology Co., Ltd., Yantai Baoyuan Purification Co., Ltd., China Academy of Space Technology, Shenzhen Qianhai Lifeng Clean System Co., Ltd., Shandong Taihong Biotechnology Development Co., Ltd., Yuanpin Cell Biotechnology Group Co., Ltd., Nanjing University of Science and Technology, Nanjing Jiunuo Technology Co., Ltd., Kingsway Fluid Control (China) Co., Ltd., Zhuhai Gree Electric Appliances Co., Ltd., Zhong Kaifa Agricultural and Engineering College, Honghui System Integration (Jiangsu) Co., Ltd., Sinopec Shanghai Engineering Co., Ltd., Nanjing Construction Engineering Quality and Safety Full Supervision Station, Suzhou Jianke Clean Technology Co., Ltd., Kunshan Construction Engineering Quality Inspection Center, Liuhefeng (Tianjin) Technology Co., Ltd. Company, Canglong Group Co., Ltd., Shandong Grid Artificial Environment Industry Design Institute Co., Ltd. The main drafters of this document are. Wang Li, Tan Jun, Yang Ziqiang, Hou Yi, Liang Lei, Wang Jian, Liu Xinzhuang, Hao Yinbo, Ji Qizheng, Guo Kai, Cao Jingui, Yuan Xiaodong, Ding Lixing, Yang Denglu, Feng Xin, Lu Weidong, Yang Xiaolin, Chen Siyuan, Zeng Shiqing, Zhou Bin, Zhu Wenhua, Li Shuai, Tang Yifeng, Yang Yuntao, Yang Zhenhua, Tong Guangcai, Li Li, Li Hongbo, Sun Lin, Chen Mingjun, Li Yuhua, Wang Zhijun, Gu Dongming, Fang Yan, Gao Jian, Li Quanhui, Zhao Jianhua, Wang Bingjing, Zhou Yicheng, and Wang Huan. The previous versions of this document and the documents it replaces are as follows. --First published in.2012 as GB/T 29469-2012; --This is the first revision.IntroductionCleanrooms and related controlled environments are used to control indoor pollution to an appropriate level to complete pollution-sensitive activities, such as electronics, aviation, The environmental conditions necessary for production and scientific research in industries such as aerospace, food, medicine, and medical care are difficult to build, require complex technology, consume high energy, and require high investment. This revision proposes the basic requirements that clean rooms and related controlled environments should meet, the main contents of performance and rationality evaluation, and the evaluation Conclusions and grade requirements to ensure that clean rooms and related controlled environments are designed reasonably, operate reliably, and have advanced technology on the basis of safety and compliance. It can meet the technological and usage requirements of production and scientific research, while being economical, applicable, green and energy-saving. Cleanrooms and related controlled environments Performance and rationality evaluation1 ScopeThis document specifies the general requirements for the performance and rationality evaluation of cleanrooms and related controlled environments, as well as the evaluation content, evaluation conclusions and Grade and evaluation report. This document is applicable to the performance and rationality evaluation of production and scientific research clean rooms and related controlled environments in various industries.2 Normative referencesThis document has no normative references.3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 controlled environment A specific area where pollution sources are controlled by prescribed methods. [Source. GB/T 25915.6-2010, 2.45] 3.2 Cleanroom and associated controlled environment A room (clean room) or confined space (clean area) that is controlled and classified according to the concentration of airborne particles, microbial limits, and chemical concentrations. And its related limited areas where pollution sources are controlled in accordance with prescribed methods (related controlled environments). 3.3 Verification Review and inspect the technical indicators, technical measures, management measures, and operating results of clean rooms and related controlled environments. 3.4 Envelope structure A general term for interior parts supported by a frame. Note. Including ceiling, walls (display screens integrated with walls, lockers and other related devices), floors, doors and windows, various interfaces and seals, etc. [Source. GB/T 36372-2018, 3.3, modified] 3.5 monitoring Measurements performed according to specified methods and plans to demonstrate facility performance. Note 1.Monitoring can be classified as continuous, intermittent or periodic. If it is periodic, the frequency must be specified. Note 2.Monitoring information is used to observe dynamic trends and provide process support. [Source. GB/T 25915.2-2021, 3.2, modified] 3.6 Risk The likelihood of the hazard occurring and its severity. [Source. GB/T 25915.6-2010, 2.114] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29469-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 29469-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 29469-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29469-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 29469-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 29469-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
