Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 2900.35-2023 English PDF

US$1434.00 ยท In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2900.35-2023: Electrotechnical terminology - Explosive atmospheres
Status: Valid

GB/T 2900.35: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 2900.35-20231434 Add to Cart 9 days Electrotechnical terminology - Explosive atmospheres Valid
GB/T 2900.35-2008RFQ ASK 5 days Electrotechnical terminology -- Equipment for explosive atmospheres Obsolete
GB/T 2900.35-1998639 Add to Cart 5 days Electrotechnical terminology. Electrical apparatus for explosive atmospheres Obsolete
GB 2900.35-1983679 Add to Cart 5 days Electrotechnical terminology--Electrical apparatus for explosive atmospheres Obsolete

Similar standards

GB/T 2424.7   GB/T 2424.5   GB/T 2900.50   GB/T 2900.36   GB/T 2900.39   GB/T 2900.27   

Basic data

Standard ID: GB/T 2900.35-2023 (GB/T2900.35-2023)
Description (Translated English): Electrotechnical terminology - Explosive atmospheres
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K04
Classification of International Standard: 01.040.29
Word Count Estimation: 78,731
Date of Issue: 2023-05-23
Date of Implementation: 2023-12-01
Older Standard (superseded by this standard): GB/T 2900.35-2008
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 2900.35-2023: Electrotechnical terminology - Explosive atmospheres

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 01:040:29 CCSK04 National Standards of People's Republic of China Replace GB/T 2900:35-2008 Electrotechnical Terminology for Explosive Atmospheres Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface I Introduction III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 426-01 General terms 1 426-02 Physical and chemical phenomena 3 426-03 Premises and areas 7 426-04 Electrical equipment (general) 8 426-06 Flameproof Enclosure "d" 15 426-07 Sand-filled type "q" 16 426-08 Increased Safety "e" 17 426-09 positive pressure "p" 19 426-10 Oil Immersion "o" 21 426-11 Intrinsically safe and associated intrinsically safe electrical apparatus "i" 22 426-12 Encapsulated "m" 26 426-13 Type of protection "n" 27 426-14 Inspection and maintenance 28 426-15 Repair and overhaul29 426-16 (dust) enclosure protection type "t" 31 426-20 heat tracing 31 426-21 Devices in explosive atmospheres 35 426-22 miner's lamp 36 426-23 Optical radiation in explosive atmospheres 36 426-24 Combustible gas detection 38 426-25 Static 44 426-26 special type "s" 46 426-27 Explosive atmospheres - application of quality systems 46 426-28 Non-electrical equipment (general) 47 426-29 Non-electrical equipment - Mining 50 Reference 51 index 52

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is part 35 of GB/T 2900 "Electrotechnical Terminology": GB/T 2900 has released more than 100 parts: This document replaces GB/T 2900:35-2008 "Electrical terminology for equipment used in explosive atmospheres" and is consistent with GB/T 2900:35-2008 In addition to structural adjustments and editorial changes, the main technical changes are as follows: ---Changed the names of the subsections in Chapter 3 of this document and IEC 60050-426:2020 "International Electrotechnical Vocabulary Part 426: Explosions Sexual environment" chapter titles should be consistent; --- Changed term entry: 426-01-01, 426-01-03, 426-02-01, 426-02-09, 426-02-10, 426-02-22, 426-02- 25, 426-03-01, 426-03-02, 426-03-13, 426-03-16, 426-04-19, 426-04-20, 426-04-29, 426-04-30, 426-04-33, 426-06-01, 426-06-02, 426-06-08, 426-07-02, 426-07-03, 426-08-11, 426-08-14, 426- 09-12, 426-09-20, 426-09-21, 426-09-22, 426-10-02, 426-11-02, 426-11-03, 426-11-28, 426-11- 35, 426-12-10, 426-13-01, 426-20-13, 426-20-19, 426-20-34, 426-20-35, 246-20-38; --- Added term entries: 426-01-09 to 426-01-24, 426-02-26 to 426-02-39, 426-03-28 to 426-03-30, 426-04-38 to 426-04-76, 426-08-15 to 426-08-22, 426-09-23, 426-11-43 to 426-11-53, 426-12- 11, 426-13-15, 426-13-16, 426-15-13 to 426-15-18, 426-16-02, 426-20-42 to 426-20-58; --- Added "426-21 Devices in Explosive Atmospheres", "426-22 Miner's Lamp", "426-23 Optical Radiation in Explosive Atmospheres" and "426-24 Combustible Gas Detection" "426-25 Electrostatic" "426-26 Special Type 's" "426-27 Explosive Atmospheres - Application of Quality Systems" "426- 28 Non-Electrical Equipment (General)" "426-29 Non-Electrical Equipment-Mining" 9 subsections; --- Terminology entries removed: 426-02-06, 426-02-07, 426-02-08, 426-02-13, 426-02-16, 426-03-07, 426-03- 08, 426-03-09, 426-03-15, 426-03-17, 426-03-18, 426-03-19, 426-03-20, 426-04-07, 426-04-08, 426-04-27, 426-04-36, 426-04-37, 426-06-04, 426-06-06, 426-06-14, 426-06-15, 426-08-02, 426- 11-08, 426-11-13, 426-11-14, 426-11-29, 426-11-30, 426-11-31, 426-12-02, 426-12-04, 426-12- 05, 426-12-07, 426-12-08, 426-13-12, 426-13-13, 426-13-14, 426-15-03, 426-20-18, 426-20-25, 426-20-32; ---Deleted "3:5 Test of electrical equipment", "3:17 Positive pressure type (dust) 'pD'", "3:18 Pouring type (dust) 'mD'", "3:19 this Quality Safety Type (Dust) 'iD'" 4 subsections: This document is equivalent to IEC 60050-426:2020 "International Electrotechnical Vocabulary Part 426: Explosive Atmospheres": The following minimal editorial changes have been made to this document: --- In order to coordinate with the current standard, the name of this document was changed to "Electrotechnical Terminology for Explosive Atmospheres": This document is proposed and managed by the National Electrotechnical Terminology Standardization Technical Committee (SAC/TC232): This document is drafted by: Nanyang Explosion-proof Electric Research Institute Co:, Ltd:, China Machinery Productivity Promotion Center Co:, Ltd:, Jiangsu Ruidun Police Equipment Equipment Manufacturing Co:, Ltd:, Zhejiang Boya Precision Machinery Co:, Ltd:, Guangzhou Puhua Environmental Protection Equipment Co:, Ltd:, Zhejiang Qinshan Cable Co:, Ltd:, Jiang Su Bafang Safety Equipment Co:, Ltd:, China Energy Construction Group Jiangsu Electric Power Design Institute Co:, Ltd:, Shenzhen Shihe Safety Technology Consulting Co:, Ltd: Co:, Ltd:, Henan Hitachi Co:, Ltd:, SINOMACH Standard Technology Research Institute (Beijing) Co:, Ltd:, SINOMACH Science and Technology Research Institute Co:, Ltd:, Nantong Jinmao Explosion-proof Electric Co:, Ltd:, Henan Leshan Cable Co:, Ltd:, Henan Baoshian Electronic Technology Co:, Ltd:, He Nanchicheng Electric Co:, Ltd:, Shenzhen Shangwei Lighting Co:, Ltd:, Henan Zhongke Lifting Electric Co:, Ltd:, Jiamusi Electric Co:, Ltd: Ltd: The main drafters of this document: Zhang Gang, Wang Qiaoli, Li Jing, Li Guifang, Chen Qi, Ke Xingchang, Lu Xuegui, Wang Qinwei, Liu Lili, Wang Lanlan, Yin Chao, Bai Junwei, Zhang Fen, Huang Weibo, Shi Baojing, Li Lei, Lu Zhongping, Wang Binbin, Wang Chunfeng, Xia Rongjian, Zhang Wenhua, Yu Miao, Chang Yanqin: This document was first published as GB/T 2900:35-1983 in 1983, revised for the first time in:1998, and revised for the second time in:2008: For the third revision:

Introduction

The standards of this standard committee are divided into 9 categories: (1) basic concepts, (2) electrical materials, (3) instruments and meters, (4) electrical equipment, (5) electronic equipment equipment, (6) power generation, transmission and distribution, (7) telecommunications technology, (8) special applications, and (9) standardization: This document belongs to the fourth part of electrical equipment, which is a general and basic term for equipment used in explosive atmospheres, and can be formulated for technical standards in this field Revision, technical exchange to provide assistance: GB/T 2900 Electrotechnical Terminology Series National Standard Part IV "Electrical Equipment" has released 17 standards, as shown below: ---GB/T 2900:27-2008 Electrotechnical terms for small power motors: The purpose is to support technology in the field of small power motors Preparation of standards and other documents, teaching and technical communication: ---GB/T 2900:64-2013 Electrotechnical term Time relay: The purpose is to support the technical standards in the field of time relays Such as document preparation, teaching and technical communication: ---GB/T 2900:40-1985 Electrical terminology special equipment for wire and cable: The purpose is to support special equipment for wire and cable Compilation, teaching and technical communication of documents such as technical standards in the field: ---GB/T 2900:18-2008 Electrotechnical terminology for low-voltage electrical appliances: The purpose is to support documents such as technical standards in the field of low-voltage electrical appliances Documentation, teaching and technical exchange: ---GB/T 2900:41-2008 Electrotechnical terms primary battery and storage battery: The purpose is to support the field of primary batteries and storage batteries Preparation of technical standards and other documents, teaching and technical communication: ---GB/T 2900:63-2003 Electrotechnical Terminology Basic Relay: The purpose is to support technical standards in the field of basic relays Such as document preparation, teaching and technical communication: ---GB/T 2900:25-2008 Electrotechnical terms for rotating electrical machines: The purpose is to support documents such as technical standards in the field of rotating electrical machines Documentation, teaching and technical exchange: ---GB/T 2900:51-1998 Electrotechnical Terminology for Overhead Lines: The purpose is to support documents such as technical standards in the field of overhead lines Documentation, teaching and technical exchange: ---GB/T 2900:35-2008 Electrotechnical terms Equipment for explosive atmospheres: The purpose is to support technology in the area of explosive atmospheres Technical standards and other document preparation, teaching and technical communication: ---GB/T 2900:16-1996 Electrotechnical terminology power capacitor: The purpose is to support technical standards in the field of power capacitors Such as document preparation, teaching and technical communication: ---GB/T 2900:49-2004 Electrotechnical Terminology Power System Protection: The purpose is to support technologies in the field of power system protection Preparation of standards and other documents, teaching and technical communication: ---GB/T 2900:70-2008 Electrotechnical Terminology Electrical Accessories: The purpose is to support documents such as technical standards in the field of electrical accessories Documentation, teaching and technical exchange: ---GB/T 2900:7-1996 Electrotechnical term electric charcoal: The purpose is to support the preparation of documents such as technical standards in the field of electric carbon, teaching and technology exchange: ---GB/T 2900:8-2009 Electrotechnical terms insulators: The purpose is to support the compilation of documents such as technical standards in the field of insulators production, teaching and technical exchange: ---GB/T 2900:17-2009 Electrotechnical term measuring relay: The purpose is to support technical standards in the field of measuring relays Such as document preparation, teaching and technical communication: ---GB/T 2900:20-2016 Electrotechnical Terminology for High Voltage Switchgear and Controlgear: Purpose is to support high voltage switchgear Compilation, teaching and technical exchange of documents such as technical standards in the field of equipment and control equipment: Electrotechnical Terminology for Explosive Atmospheres

1 Scope

This document defines relevant terms and definitions for equipment intended for use in explosive atmospheres: This document is suitable for communication in the industrial field and its related fields, and also for the communication of related standardization documents and other publications prepared by: As a basic document, the terms defined in this document are consistent with electrotechnical terms in other professional fields:

2 Normative references

This document has no normative references:

3 Terms and Definitions

426-01 General terms 426-01-01 Instruments, accessories, components, etc: used as part of a device or related thereto: Note: Equipment containing explosion-proof types may be "Ex equipment" or "Ex components": 426-01-02 Special measures taken for equipment to prevent ignition of the surrounding explosive atmosphere: 426-01-03 Equipment category equipment grouping The method of classification relevant to the explosive atmospheres in which the equipment is intended: Note: IEC 60079-0 divides equipment into three categories: ---Class I: equipment for coal mine gas environment; ---Class II: equipment for all other explosive gas atmospheres except coal mine gas atmospheres, and this type of equipment is further divided into several categories; ---Class III: Equipment for all other explosive dust atmospheres other than coal mines, and this type of equipment is divided into several categories: 426-01-04 Achievable by any part or any surface of Ex equipment when operating under the most adverse operating conditions (but within the specified tolerances) maximum temperature: Note 1: For Ex equipment for explosive gas atmospheres, the temperature appears on the internal components or on the outer surface of the enclosure, depending on the type of protection: Note 2: For Ex equipment for explosive dust atmospheres, this temperature appears on the outer surface of the enclosure and includes the specified dust layer conditions: 426-01-05 temperature group temperatureclass The method of classification based on the maximum surface temperature of Ex equipment is related to the specific explosive gas atmosphere in which the Ex equipment is intended to be used:
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2900.35-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2900.35-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2900.35-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2900.35-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2900.35-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2900.35-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.