Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 2855.1-2008 English PDF

Q: How long will the true-PDF of English version of GB/T 2855.1-2008 be delivered?

Upon your order, we will start to translate GB/T 2855.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 2855.1-2008_English with my colleagues?

Yes. The purchased PDF of GB/T 2855.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 2855.1-2008?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2855.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2855.1-2008: Holders for sliding guide die sets for stamping dies -- Part 1: Punch holders for die sets
Status: Valid

GB/T 2855.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 2855.1-2008	369	Add to Cart	3 days	Holders for sliding guide die sets for stamping dies -- Part 1: Punch holders for die sets	Valid
GB/T 2855.1-1990	239	Add to Cart	2 days	Holder for sliding guide die sets for press tools--Punch holder for diagonal pillar sets	Obsolete

Similar standards

GB/T 45677 GB/T 6110 JB/T 3943 GB/T 2873.3 GB/T 2851 GB/T 2852

Basic data

Standard ID: GB/T 2855.1-2008 (GB/T2855.1-2008)
Description (Translated English): Holders for sliding guide die sets for stamping dies -- Part 1: Punch holders for die sets
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.30
Word Count Estimation: 16,178
Date of Issue: 2008-04-10
Date of Implementation: 2008-10-01
Older Standard (superseded by this standard): GB/T 2855.1-1990; GB/T 2855.11-1990; GB/T 2855.13-1990; GB/T 2855.5-1990; GB/T 2855.7-1990; GB/T 2855.9-1990
Quoted Standard: JB/T 8070
Regulation (derived from): National Standard Approval Announcement 2008 No.5 (Total No.118)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the sliding guide die mold base structure, dimensions and markings. This section applies to spend sliding guide die mold base.

GB/T 2855.1-2008: Holders for sliding guide die sets for stamping dies -- Part 1: Punch holders for die sets

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Holders for sliding guide die sets for stamping dies Part 1. Punch holders for die sets ICS 25.120.30 J46 National Standards of People's Republic of China Replacing GB/T 2855.1-1990, GB/T 2855.5-1990, GB/T 2855.7-1990, GB/T 2855.9-1990, GB/T 2855.11-1990, GB/T 2855.13-1990 Die slide die - Part 1. punch holder Posted 2008-04-10 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 2855 "die slide die" is divided into two parts. --- Part 1. Sliding guide die die die holder base; --- Part 2. Die slide die lower die. This section GB/T 2855 Part 1. This part of the GB/T 2855.1-1990 "die slide die diagonal guide post mold base", GB/T 2855.5-1990 "Chong The rear slide die mold guide pillar mold base ", GB/T 2855.7-1990" die slide die on the rear side of the pillar-shaped narrow mold Block ", GB/T 2855.9-1990" die slide die guide post intermediate mold base ", GB/T 2855.11-1990" die slide guide Mold base to the middle pillar circular punch holder "and GB T 2855.13-1990 /" die slide die four guide post mold base "merger Amendments. This portion of the GB/T 2855.1-1990, GB/T 2855.5-1990, GB/T 2855.7-1990, GB/T 2855.9-1990, GB /and GB/T 2855.13-1990 compared to the main changes in T 2855.11-1990 are as follows. --- The standard name be changed to "die slide die - Part 1. punch holder"; --- Added "preface" and "normative references"; --- Remove the rear side of the pillar-shaped punch holder narrow content; --- Intermediate guide post mold base structure and dimensions considerably revised; --- Material instead recommended. This part of the National Standardization Technical Committee proposed die. This part of the National Standardization Technical Committee mold (SAC/TC33) centralized. This section is drafted. Hangzhou Xiaoshan precision mold standard factory, Guilin Institute of Electrical Science, Zhenjiang Chuanshan mold factory, electronic Guilin Branch Technical University. The main drafters of this section. Zhang Yuqin, WENG Shi Zhen Qi Wei root, Liao Wang Yi, Feng double. This part of the standard replaces the previous editions are. --- GB 2855.1-1981, GB 2855.3-1981, GB 2855.5-1981, GB 2855.7-1981, GB 2855.9- 1981, GB 2855.11-1981, GB 2855.13-1981; --- GB/T 2855.1-1990, GB/T 2855.5-1990, GB/T 2855.7-1990, GB/T 2855.9-1990, GB/T 2855.11-1990, GB/T 2855.13-1990. Die slide die - Part 1. punch holder

1 Scope

This section provides the sliding guide die mold base configuration, dimensions and marking. This section applies to spend die sliding guide die holder.

2 Normative references

The following documents contain provisions which, through reference to GB/T 2855 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. JB/T 8070 die mold parts and technical conditions

3 Dimensions

3.1 pairs angle guide post mold base Diagonal guide post mold base structure and dimensions shown in Figure 1, Figure 2 and Table 1. Note the surface roughness is not a non-machined surface. 1 diagonal guide pillar die holder (L × B≤200 × 160) ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2855.1-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2855.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2855.1-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2855.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2855.1-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2855.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.