GB/T 27788-2020 English PDF

US$414.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27788-2020: Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
Status: Valid

GB/T 27788: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 27788-2020	414	Add to Cart	3 days	Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification	Valid
GB/T 27788-2011	794	Add to Cart	3 days	Microbeam analysis -- Scanning-electron microscopy -- Guidelines for calibrating image magnification	Obsolete

Similar standards

GB/T 17360   GB/T 22062   GB/T 32387   GB/T 43749   GB/T 26600   

Basic data

Standard ID: GB/T 27788-2020 (GB/T27788-2020)
Description (Translated English): Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N32
Classification of International Standard: 37.020
Word Count Estimation: 22,292
Date of Issue: 2020-06-02
Date of Implementation: 2021-04-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 27788-2020: Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification ICS 37.020 N32 National Standards of People's Republic of China Replace GB/T 27788-2011 Scanning electron microscopy Guidelines for image magnification calibration (ISO 16700.2016, IDT) 2020-06-02 release 2021-04-01 Implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Contents

Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Image magnification 3 5 Reference substance 3 6 Calibration process 4 7 Image magnification and scale accuracy 7 8 Calibration report 7 Appendix A (informative appendix) Reference material for magnification 9 Appendix B (informative appendix) Parameters affecting the actual magnification of the scanning electron microscope 11 Appendix C (informative appendix) Uncertainty of magnification measurement 12 Appendix D (Informative Appendix) Sample Test Report 13 Reference 16

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 27788-2011 "Guidelines for Micron Analysis Scanning Electron Microscope Image Magnification Calibration". versus Compared with GB/T 27788-2011, except for editorial changes, the main technical changes are as follows. --- Deleted ISO 5725-1; ---The translation of the term "Pitch" is changed from "Line pitch" to "Pitch". The translation method used in this standard is equivalent to ISO 16700.2016 "Guidelines for Micron Analysis Scanning Electron Microscope Image Magnification Calibration". The Chinese documents that have a consistent correspondence with the international documents normatively cited in this standard are as follows. ---GB/T 15000.3-2008 Guidelines for working with standard samples (3) General principles and statistical methods for standard sample setting (ISO Guide35.2006, IDT) ---GB/T 15000.7-2012 Working Guidelines for Standard Samples (7) General requirements for the ability of standard sample producers (ISO Guide34. 2009, IDT) This standard has made the following editorial changes. --- Added "A.2.5 China National Institute of Metrology (NIMC)" to informative Appendix A to make this standard more Operable. This standard is proposed and managed by the National Microbeam Analysis Standardization Technical Committee (SAC/TC38). This standard was drafted by. Institute of Mineral Resources, Chinese Academy of Geological Sciences, Shanghai Institute of Ceramics, Chinese Academy of Sciences, People's Liberation Military Naval Medical University. The main drafters of this standard. Chen Zhenyu, Zhou Jianxiong, Li Xiangting, Yang Yongji. The previous versions of the standard replaced by this standard are as follows. ---GB/T 27788-2011.

Introduction

Scanning electron microscopy is widely used for the surface structure of many important materials such as semiconductors, metals, polymers, glass, food and biological materials, etc. Observational research. This standard applies to the calibration of SEM image magnification and describes the use of certified reference materials or parameters in SEM The test substance is required for image magnification calibration. Scanning electron microscopy Guidelines for image magnification calibration

1 Scope

This standard specifies the method for calibrating the magnification of scanning electron microscope (SEM) images using appropriate reference materials. This standard is applicable to the calibration of the magnification determined by the available range of the distance between the calibration reference materials. This standard does not apply to special length measuring SEM.

2 Normative references

The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 27025-2008 General requirements for the ability of testing and calibration laboratories (ISO /IEC 17025.2005, IDT) ISO Guide 30 Common Terms and Definitions of Standard Samples (Referencematerials-Selectedtermsanddefinitions) ISO Guide 34 General requirements for the competence of standard sample producers (General requirements for the competition of ref- erencematerialproducers) ISO Guide 35 General principles and statistical methods for standard sample setting (Referencematerials-Generaland statisticalprinciplesforcertification)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Scanning electron microscope scanningelectronmicroscope SEM An instrument that generates a magnified image by scanning the surface of a sample with an electron beam. 3.2 Image image Two-dimensional characterization of the sample surface produced by the scanning electron microscope (3.1). Note. A sample photo taken with a scanning electron microscope is one type of image. 3.3 Image magnification The ratio of the linear scale displayed by the image to the corresponding linear scale of the scanned area on the sample. 3.4 Scalemarker The image (3.2) shows the line segment or interval of the specific actual length on the sample. 3.5 Reference material RM One or more substances with sufficiently uniform and stable properties have been confirmed to be suitable for use in the measurement process. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 27788-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 27788-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 27788-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 27788-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 27788-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 27788-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.