GB/T 27667-2011 English PDF

US$374.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27667-2011: Quality evaluation of optical systems -- Determination of distortion
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 27667-2011	374	Add to Cart	3 days	Quality evaluation of optical systems -- Determination of distortion	Valid

Similar standards

GB/T 22062   GB/T 4315.1   GB/T 4315.2   GB/T 44436   GB/T 26332.1   GB/T 27660   

Basic data

Standard ID: GB/T 27667-2011 (GB/T27667-2011)
Description (Translated English): Quality evaluation of optical systems -- Determination of distortion
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N30
Classification of International Standard: 37.020
Word Count Estimation: 19,189
Date of Issue: 2011-12-30
Date of Implementation: 2012-05-01
Adopted Standard: ISO 9039-2008, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 22 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the optical system radial distortion measurement method. This standard applies to spectrum within the range of 100nm ~ 15000nm, and has a rotational symmetry properties of optical systems. Characteristics that meet the rotationally symmetric electron optical imaging systems can also refer to the use. This standard does not apply to deformation of the optical system.

GB/T 27667-2011: Quality evaluation of optical systems -- Determination of distortion

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Quality evaluation of optical systems. Determination of distortion ICS 37.020 N30 National Standards of People's Republic of China Determination of optical distortion image quality evaluation system (ISO 9039.2008, Opticsandphotonics-Qualityevaluationofoptical systems-Determinationofdistortion, IDT) Issued on. 2011-12-30 2012-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Terms and definitions 1 3 classification system under test 3 3.1 infinity object distance, the image distance far finite system 3 3.2 infinity object distance, the image distance infinity system 3 3.3 Finite far object distance, the image distance far finite system 3 3.4 Finite far object distance, the image distance infinity system 3 4 Test Method 3 4.1 Overview 3 4.2 means 4 The basic requirements for the measurement of 8 5 Reference angle optical system under test 5.1 8 5.2 coordinate origin 8 Select the image height 5.3 9 6 Evaluation 9 6.1 parameters a, calculate a ', m or Γ 9 6.2 Calculation of distortion 9 7 expression measurement result 9 8 10 test reports Methods Appendix A (informative) Example 11 converting the measurement origin Annex B (informative) for geometric distortion value 14 References 15

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 9039.2008 "Optics and Photonics optical image quality evaluation system distortion measurement." For ease of use, this standard also made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Delete international standards foreword. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee photon science and optics (SAC/TC103) centralized. This standard is drafted by. Shanghai Polytechnic University, East China Normal University, Jiangnan Yong new Optical Co., Ltd., Ningbo Yongxin Optics shares have Ltd., Nanjing East to facilitate photoelectric Industrial Co., Ltd., Ningbo City Teaching Instrument Co., Ltd. Ningbo Huaguang Precision Instrument Co., Ltd. Ningbo Shun Yu Instrument Co., Ltd., Wuzhou Oka optical instrument company, Guangzhou, Guangdong, significant optical instruments limited liability company, Mike Audi Industrial Group Co. Secretary, Chongqing Optical Instrument Co., Ltd., Guiyang Xintian Optoelectronics Technology Co., Ltd. Suzhou an optical instrument. The main drafters of this standard. Huang Weijia, Zhang Hui Yin, Wang Wei students, Li Xi, who Franc, Yang Guanglie, Wang Guorui, Xu Liming, Husen tiger, Zhang Jinghua, Huang Wenyong, Outlay summer Shuo, Hu Qing, Gu Jie. Determination of optical distortion image quality evaluation system

1 Scope

This standard specifies the optical system radial distortion measurement method. This standard applies to the spectral range of 100nm ~ 15000nm inside, and has a rotational symmetry properties of the optical system. For compliance with spin Turn symmetry properties of the electron-optical imaging system, may also refer to use. This standard does not apply to the deformation of the optical system.

2 Terms and definitions

The following terms and definitions apply to this document. 2.1 Distortion distortion A widthwise magnification field of view with the changes caused by the increase of loss was like one kind of aberration similar. Note. If the image plane at infinity, as indicated by the position of the tangent of the angle of view. 2.2 Reference plane referenceplane Measuring, calibration plane, it is the physical characteristics of the measuring apparatus corresponding to such mounting flanges or other dedicated components. 2.3 Absolute distortion absolutedistortion Va The observed image point to the radial distance between the ideal image point. Expressed in units of millimeters or microns. 2.4 Relative distortion relativedistortion Vr Va absolute distortion from the ideal image height h'0 expressed as a percentage. 2.5 It was high objectheight Object point to a test sample from the rotational symmetry axis between. Expressed in units of millimeters. 2.6 Like high imageheight h ' Dot to the test sample from the optical axis between the rotation symmetry. Expressed in units of millimeters. 2.7 Field of view angle objectpupilfieldangle ωP Principal ray and the optical axis angle of the edge of the object point twice. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 27667-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 27667-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 27667-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 27667-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.