GB/T 2688-2012 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2688-2012: Plain bearing -- Technical specification of powder metallurgy bearing Status: Valid GB/T 2688: Historical versions
Basic dataStandard ID: GB/T 2688-2012 (GB/T2688-2012)Description (Translated English): Plain bearing -- Technical specification of powder metallurgy bearing Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J12 Classification of International Standard: 21.100.10 Word Count Estimation: 10,122 Older Standard (superseded by this standard): GB/T 2688-1981 Quoted Standard: GB/T 223.3; GB/T 223.4; GB/T 223.6; GB/T 223.7; GB/T 223.8; GB/T 223.9; GB/T 223.11; GB/T 223.12; GB/T 223.13; GB/T 223.14; GB/T 223.16; GB/T 223.17; GB/T 223.18; GB/T 223.19; GB/T 223.20; GB/T 223.21; GB/T 223.22; GB/T 223.23; GB/T 223.25; GB/T 223.26; G Regulation (derived from): National Standards Bulletin No. 9 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the GB/T 18323 powder metallurgy bearing specified technical conditions. This standard applies to powder metallurgy iron-based and copper bearing. GB/T 2688-2012: Plain bearing -- Technical specification of powder metallurgy bearing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS21.100.10 J12 National Standards of People's Republic of China Replacing GB/T 2688-1981 Powder metallurgy plain bearing Technical conditions Issued on. 2012-05-11 2012-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard rule according to GB/T 1.1-2009 given draft. This standard replaces GB/T 2688-1981 "Powder metallurgy plain bearing technical condition." Compared with the GB/T 2688-1981, The main technical changes are as follows. --- Standard format in accordance with GB/T 1.1 claim rearrange; --- Increasing the normative references; --- Revised Table 1, Table 2 powder metallurgy method of marking an increase of iron-based and copper-bearing species; --- Table 2 and Table A.3 in the unit "kgf/mm2" to "MPa"; --- Normative Appendix A bearing surface roughness by the "▽ 7" to "≤Ra1.6". The standard proposed by China Machinery Industry Federation. This standard sliding bearing by the National Standardization Technical Committee (SAC/TC236) centralized. This standard is drafted by. The machine Productivity Promotion Center, Hefei Bolin Advanced Materials Co., Ltd. Participated in the drafting of this standard. Hefei University, Lin'an Oriental Bearing Co., Ltd. This standard replaces the standards previously issued as follows. --- GB/T 2688-1981. Powder metallurgy plain bearing Technical conditions1 ScopeThis standard specifies the technical conditions for powder metallurgy bearing GB/T 18323 prescribed. This standard applies to copper-based and iron-based powder metallurgy bearings.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 223 (all parts), steel and alloy chemical analysis method GB 443-1989 L-AN Total loss system oil GB/T 1800.1-2009 Geometrical product specifications (GPS) limits and fits - Part 1. Tolerances, deviations and fits basis GB/T 1800.2-2009 Geometrical product specifications (GPS) limits and fits - Part 2. Standard tolerance grades and holes and shafts Limit deviations GB/T 1958-2004 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements GB/T 5163-2006 sintered metal materials (excluding carbide) Permeable sintered metal material density, oil content and open Determination of porosity Determination of strength GB/T 6804-2008 sintered metal bushing radial crushing Determination of apparent hardness of the first part of the GB/T 9097.1-2002 sintered metal materials (excluding hardmetal). a cross-sectional hardness of the matrix The uniform material GB/T 10425-2002 sintered metal friction materials - Determination of apparent hardness GB/T 18323-2001 sintered sliding bearing bushes - Dimensions and tolerances3 Technical requirements3.1 bearing material classification according to alloy composition and density, according to the provisions in Table 1. Table 1 Classification of the base class base alloy No. Classification Classification Grade mark oil density/(g/cm3) Iron-based 1 Iron 1 Iron - Graphite 2 FZ11060 > 5.7 ~ 6.2 FZ11065 > 6.2 ~ 6.6 FZ12058 > 5.6 ~ 6.0 FZ12062 > 6.0 ~ 6.4 FZ12158 > 5.6 ~ 6.0 FZ12162 > 6.0 ~ 6.4 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2688-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 2688-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2688-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2688-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2688-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2688-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
