GB/T 26143-2010 English PDF

US$759.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26143-2010: Connectors for hydraulic fluid power -- Test methods
Status: Obsolete

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26143-2010	759	Add to Cart	3 days	Connectors for hydraulic fluid power -- Test methods	Obsolete

Similar standards

GB/T 20080   GB/T 17491   GB/T 25133   GB/T 22107   GB/T 26142.2   GB/T 26142.1   

Basic data

Standard ID: GB/T 26143-2010 (GB/T26143-2010)
Description (Translated English): Connectors for hydraulic fluid power -- Test methods
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J20
Classification of International Standard: 23.100.40
Word Count Estimation: 19,163
Date of Issue: 1/14/2011
Date of Implementation: 10/1/2011
Quoted Standard: ISO 48; ISO 3448; ISO 3601-3; ISO 5598; ISO 6508-1; ISO 6508-2; ISO 6508-3; ISO 6605; ISO 6743-4
Adopted Standard: ISO 19879-2010, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 2 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies all kinds of metal fittings used in hydraulic transmission, and port matching stud ends, testing and performance evaluation of the flanged pipe joint unified approach. This standard does not apply to hydraulic GB/T 5861 covered by the quick-change test pipe joints. This standard test is independent of each other, is to follow the test file. Pilot project to be carried out and specific performance standards, see the appropriate standard components. Except for qualified fittings judgment should be based on this standard specifies the minimum number of specimens tested, but in the relevant standard fittings or otherwise provided manufacturers and users agree otherwise situation.

GB/T 26143-2010: Connectors for hydraulic fluid power -- Test methods

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Connectors for hydraulic fluid power. Test methods ICS 23.100.40 J20 National Standards of People's Republic of China Test methods for hydraulic fittings (ISO 19879.2010Metalictubeconnectionsforfluidpowerandgeneraluse- Testmethodsforhydraulicfluidpowerconnections, IDT) Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is based on GB/T 1.1-2009 given rule drafting. This standard uses the translation method identical with ISO 19879.2010 "fittings for hydraulic fluid power and general use of the transmission tube Test methods "joints. Correspondence between the consistency of the standards of international documents and normative references of the following documents. GB/T 230 (all parts) Metallic Rockwell hardness test [ISO 6508 (all parts)] GB/T 3141-1994 Industrial liquid lubricants - ISO viscosity classification (eqv ISO 3448.1992) GB/T 3452.2-2007 hydraulic and pneumatic rubber O-rings - Part 2. appearance quality inspection standard (ISO 3601-3. 2005, IDT) GB/T 6031-1998 Determination of vulcanized rubber or thermoplastic rubber hardness (10 ~ 100IRHD) (idt ISO 48.1994) GB/T 7631.2-2003 Lubricants, industrial oils and related products (L class) classification - Part 2. H (Hydraulic systems) (ISO 6743-4.1999, IDT) GB/T 7939-2008 Hydraulic hose assemblies - Test methods (ISO 6605.2002, MOD) GB/T 17446-1998 fluid power systems and components term (idt ISO 5598. 1985) This standard made the following editorial changes. --- The standard name reduced to "hydraulic fittings test methods"; --- Add "or test pressure specified" in Table 5 "test duration" narrative; --- Add "9.1", "11.2", "12.1" and "13.1" and "Notes." The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of hydraulic and pneumatic (SAC/TC3) centralized. This standard is drafted by. Jiangsu Machinery Research and Design Institute Co., Ltd., Tianjin Construction Machinery Transmission Co. refiner. Participated in the drafting of this standard. Eaton (Ningbo) fluid connector Ltd., Haiyan Pipe Manufacturing Co., Ltd., Zhejiang and Jiangsu Jiang hydraulic grid Ltd., Zhejiang China Valve Co., Ltd., China Shipbuilding Industry Corporation 704 Research Institute, Shanghai Lixin Hydraulic Co., Panzhihua Iron and Steel Group Metallurgy Engineering Ltd. Industrial Development Branch. The main drafters of this standard. Yang Yongjun, Pingguo Xun, Zhou Shunhua, Gengzhi science, Luoxue Rong, Xu Zhangxiang, Hung Chao, Shanghai Hai Peng, Liu Xiaoping.

Introduction

In fluid power systems, power and control is passed through a closed-loop pressurized liquid inside. Design elements that must be met These changes in working conditions requirements. Detecting element meet the performance requirements carried out, to determine whether the design elements and practical test whether the element symbol Combined requirements provided. Test methods for hydraulic fittings Warning. Some of the tests in this standard are dangerous and therefore must be strictly take all appropriate safety precautions during the test Measures. For burst, fine spray (may penetrate the skin) hazardous energy release and expansion of the gas, etc. should be noted. In order to reduce energy Dangerous release of pressure before the test specimen shall discharge the air inside. Test by trained and qualified personnel to operate and complete.

1 Scope

This standard specifies the types of metal fittings used in the hydraulic transmission, and port match the stud end, testing and performance of flanged pipe joints Unified Approach evaluation. This standard does not apply to hydraulic GB/T 5861 covered by the quick-change test pipe joint. The standard of the test is independent of each other, it is to follow the test file. Specific pilot project to be carried out and meet performance standards Corresponding standard components. Eligible for pipe joint determination, minimum number of specimens shall be specified in this standard test, but otherwise the relevant standard gauge fittings Except in the case of a given user or manufacturer otherwise agreed.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 48 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10IRHD ~ 100IRHD) (Rubber, vul- canizedorthermoplastic-Determinationofhardness (hardnessbetween10IRHDand100IRHD) ISO 3448 Industrial liquid lubricants - ISO viscosity classification (Industrialliqiudlubricants-ISO viscosityclassifica- tion) ISO 3601-3 fluid transmission O-rings - Part 3. Quality acceptance criteria (Fluidpowersystems-O-rings- Part 3. Qualityacceptancecriteria) ISO 5598 Fluid power systems and components vocabulary (Fluidpowersystemsandcomponents-Vocabulary) ISO 6508 (all parts) of metallic materials Rockwell hardness test (Metalicmaterials-rockwelhardnesstest) ISO 6605 Hydraulic hoses and hose assemblies - Test methods (Hydraulicfluidpower-Hoseandhose assemblies-Testmethod) ISO 6743-4 Lubricants, industrial oils and related products (L class) classification - Part 4. H (Hydraulic systems) (Lubricants, industrialoilsandrelatedproducts (classL) -Classification-Part 4. familyH (Hydraulicsystems)

3 Terms and Definitions

Terms and definitions established in ISO 5598 apply to this document.

4 General requirements

4.1 Component Test All participants should be the ultimate form of elements, including annealed nut (when brazing components required). Unless the various types of standard fittings ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26143-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26143-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26143-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26143-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.