GB/T 25505-2010 English PDF

US$1499.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25505-2010: General provisions for programming mooring, sea trials and fishing of sea going fishery vessel
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25505-2010	1499	Add to Cart	10 days	General provisions for programming mooring, sea trials and fishing of sea going fishery vessel	Valid

Similar standards

JT/T 258   GB/T 37348   GB/T 37335   

Basic data

Standard ID: GB/T 25505-2010 (GB/T25505-2010)
Description (Translated English): General provisions for programming mooring, sea trials and fishing of sea going fishery vessel
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U15
Classification of International Standard: 47.020
Word Count Estimation: 68,625
Date of Issue: 2011-01-10
Date of Implementation: 2011-07-01
Regulation (derived from): National Standard Approval Announcement 2011 No.1 (Total No.166)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the marine fishing vessels (hereinafter referred to as fishing) mooring, General requirements for navigation and fishing trials, test conditions, pilot projects and methods. This standard applies to newly constructed captain of not less than 24m diesel powered fishing boats, other ships may refer to.

GB/T 25505-2010: General provisions for programming mooring, sea trials and fishing of sea going fishery vessel

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General provisions for programming mooring, sea trials and fishing of sea going fishery vessel ICS 47.020 U15 National Standards of People's Republic of China Marine fishing vessel mooring, navigation and Fishing General Test Generalprovisionsforprogrammingmooring, seatrials Issued on. 2011-01-10 2011-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 General requirements 1 3 Mooring Test 1 3.1 Devices anchor and windlass Test 1 3.2 rudder and steering gear test 2 3.3 Mechanical tests 3 fishing 3.4 lifting equipment test 3 3.5 Mooring Equipment Test 5 3.6 Rescue equipment testing 5 3.7 gangway means test 6 3.8, windows, hatches and other openings 6 closing means test 3.9 fire detection and fire alarm system test 7 3.10 extinguishing system test 7 3.11 bilge oily water filtering equipment and systems test 8 3.12 ballast system test 9 3.13 sparse water supply and drainage system test deck 10 3.14 Health excretory system and sewage treatment system test 10 3.15 Ventilation System Test 11 3.16 air compressor and compressed air system test 11 3.17 oil, fuel and cooling systems Test 11 3.18 Fuel oil and oil machine test 12 Auxiliary boiler test 12 3.19 3.20 Cooling System Test 13 3.21 Test air conditioning system 15 3.22 Propulsion System Test 15 Auxiliary engine test 17 3.23 3.24 Generator Test 17 3.25 Test emergency generator 18 3.26 Distribution Equipment Test 19 3.27 Test drive motor and control apparatus 19 3.28 battery charge and discharge control device 19 tests 3.29 primary, emergency lighting and fishing light System Test 19 3.30 electric heaters, electric air conditioners, electric fans test 20 Within a 3.31-ship communications and signaling devices 20 test 3.32 Test the radio communication apparatus 20 3.33 fisheries aid, navaids Test 21 3.34 Test signal equipment 23 3.35 bollard pull test 24 4 24 sea trial 4.1 Ship Performance Test 24 4.2 Test steering 25 4.3 Test anchor 26 4.4 Propulsion System Test 27 4.5 auxiliary boiler test 28 4.6 desalination plant test 28 4.7 diesel generator test 28 4.8 Test the radio communication apparatus 29 4.9 help fishing, navaids Test 29 5 30 test fishing 5.1 General requirements 30 5.2 Test trawler 30 5.3 seiner Test 30 5.4 Other fishing practices Test 31 31 5.5 Other test equipment Appendix A (informative) Test report format recording 32 Annex B (informative) fishing vessel lifting device safe working load (SWL) to determine 63

Foreword

The Standard Appendix A, Appendix B is an informative annex. The standard proposed by the People's Republic of China Ministry of Agriculture. This standard by the National Standardization Technical Committee boats (SAC/TC157) centralized. This standard was drafted. People's Republic of China Shandong Fishing Vessel, Fishing Vessel People's Republic of China. The main drafters of this standard. in Roughs, Wei Guangdong, ice Ning, Jiang Peng Yue, Zhao Jingtao, the history of the construction, Zhang Huazhong, Li Ruihua. Marine fishing vessel mooring, navigation and Fishing General Test

1 Scope

This standard specifies the general requirements for marine fishing vessel (hereinafter referred to as fishing) mooring, sea trials and fishing, the test conditions, test items Head and methods. This standard applies to the construction of a new captain is not less than 24m diesel powered fishing boats, other vessels may refer to.

2 General requirements

2.1 Test the new vessels shall be satisfied when the test conditions specified in this standard. Tilt tests should be carried out prior to 2.2 made boats sailing test, tilt test report and approved its completion stability calculations should experience the boat sector. Boat Line test shall be eliminated mooring trials found fault, defects. With the first one or the first type of fishing boats 2.3 Each shipyard should test fishing; fishing sailing test should be eliminated Test found fault, defects. 2.4 The test results of each project should be consistent with applicable rules, norms and standards. 2.5 Test Equipment and instruments used in the test shall be certified by the State quality inspection departments, and within the validity period.

3 mooring test

3.1 Devices anchor and windlass test 3.1.1 Test conditions With the following conditions can be carried out and anchor windlass means test. a) windlass and its system, anchor chain, anchor, abandoned the chain, chain stopper, such as the installation of qualified friction drum; b) safety valve, check valve and overload protection qualified. 3.1.2 Test Project 3.1.2.1 windlass load running test 3.1.2.1.1 hydraulic anchor the positive and reverse at full continuous operation 30min, when every 5min test positive, reversing transformation once observed biography Actuating means and all moving parts without abnormal heating phenomenon and percussion, the work of the inspection of the hydraulic system. 3.1.2.1.2 electric windlass were positive, reversing the continuous operation of each 15min, observe whether the abnormal heat and moving parts percussion phenomenon, check Electrical control equipment stall speed and reliability of the electromagnetic brake, waterproof motor should still check the drainage holes and space heaters work Circumstances, such as a DC motor commutation still should examine their situation. 3.1.2.1.3 mechanical anchor continuously operated 30min, the clutch operation five times, to observe the moving parts and gear whether the abnormal heat And vibration phenomena. 3.1.2.1.4 Human windlass manpower rotation test done to check the work of each rotating member. Function test 3.1.2.2 anchoring device 3.1.2.2.1 The anchors were thrown out in the process broke down with brake brakes twice, then put away the anchor windlass, check the clutch manipulation Convenience, reliability brakes work, as well as chains and shackles by case hawse pipe, and stop the chain sprocket, the sprocket chain should be no Jump chain and distortions; and check the chain stopper is correctly positioned and fit the circumstances to recover the anchor fluke and hull. 3.1.2.2.2 checking the work of anchor flush device. 3.1.2.2.3 checking the effectiveness of emergency manpower anchor device. Pull up the anchor and chain length of the test should be greater than 2m. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25505-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25505-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25505-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25505-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.