GB/T 24376-2009 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24376-2009: Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main dimensions of coverings for top rollers Status: Valid
Basic dataStandard ID: GB/T 24376-2009 (GB/T24376-2009)Description (Translated English): Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main dimensions of coverings for top rollers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: W90 Classification of International Standard: 59.120.10 Word Count Estimation: 6,623 Date of Issue: 2009-09-30 Date of Implementation: 2010-03-01 Adopted Standard: ISO 98-2001, MOD Regulation (derived from): National Standard Approval Announcement 2009 No.10 (Total No.150) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the spinning preparation and spinning machinery on roller coverings (combined into coverings) main dimensions. This standard applies to the spinning preparatory and spinning machinery roller coverings. GB/T 24376-2009: Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main dimensions of coverings for top rollers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Textile machinery and accessories. Spinning preparatory and spinning machinery. Main dimensions of coverings for top rollers ICS 59.120.10 W90 National Standards of People's Republic of China Textile machinery and accessories Spinning preparatory and spinning machinery The main dimensions of the roller coverings (ISO 98.2001, MOD) Posted 2009-09-30 2010-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis revised standard adopts ISO 98.2001 "Textile machinery and accessories - Spinning preparatory and spinning on a spinning machine roller wrap major scale Inch "(in English). This standard is based on ISO 98.2001 redrafted with ISO 98.2001 technical differences are as follows. And 38mm two specifications; Table 3 wrap width Chou adds 170mm specifications. Reason for the above technical differences are. As ISO 98.2001 has released seven years, while technological progress and development is not limited to ISO 98.2001 sizes specified in the standard sizes increased in line with the international trend of technological development, and may not greatly Amendments to harmonize international standards. Therefore, the standard adds the above specifications to meet the actual needs and to enhance the applicability of this standard. For ease of use, this standard ISO 98.2001 made the following editorial changes. a) "ISO 98" replace the word "GB/T 24376"; b) Remove ISO 98. Foreword 2001; c) "2, code-named" "space" between the code and the name was changed to the corresponding dashes "---", after the name of increasing the punctuation; The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. two Wuxi Rubber Co., Rudong Textile Rubber Co., Ltd., Anhui Bayi Textile Equipment Factory, Shaanxi spinning Weaving equipment Institute. The main drafters of this standard. water conservancy Hou, Zhao Yusheng, Hu Wanchun, Chen Liang, Hu Yimin, Wuguo Xuan, Wen Wan, Xiao Guohua. Textile machinery and accessories Spinning preparatory and spinning machinery The main dimensions of the roller coverings1 ScopeThis standard specifies the mechanical spinning preparation and spinning on roller coverings (combined into cladding) main dimensions. This standard applies to the spinning preparatory and spinning machinery roller coverings.2 CodeChou --- wrap width; F --- cradle pressure; B --- rectangular cladding type (see Figures 1 and 2); C --- bevel cladding type (see Figures 1 and 2); D --- arc angle cladding type (see Figures 1 and 2).3 Dimensions3.1 Single head roller Spinning preparation (such as comber and drawframe) with a single head roller coverings main dimensions shown in Figure 1, Table 1, Table 2 and Table 3 (double head Rolla See Figure 2). If a single head roller coverings with a removable liner, performance standards similar to Figure 3.1 single head roller diameter and wrap width Figure......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24376-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24376-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24376-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24376-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
