GB/T 24371-2009 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24371-2009: Spinning preparatory, spinning and doubling (twisting) machinery -- Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24371-2009	154	Add to Cart	3 days	Spinning preparatory, spinning and doubling (twisting) machinery -- Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64	Valid

Similar standards

FZ/T 93048.1   FZ/T 93019   GB/T 24373   GB/T 24374   GB/T 24372   

Basic data

Standard ID: GB/T 24371-2009 (GB/T24371-2009)
Description (Translated English): Spinning preparatory, spinning and doubling (twisting) machinery -- Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: W90
Classification of International Standard: 59.120.10
Word Count Estimation: 8,890
Date of Issue: 2009-09-30
Date of Implementation: 2010-03-01
Quoted Standard: ISO 286-2-1988
Adopted Standard: ISO 368-2006, IDT
Regulation (derived from): National Standard Approval Announcement 2009 No.10 (Total No.150)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the taper of 1: 38 and 1: 64 in the ring, and twisting bobbin dimensions (length and diameter) and allow the whole run, and provides test gauges bobbin dimensions and tolerances.

GB/T 24371-2009: Spinning preparatory, spinning and doubling (twisting) machinery -- Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Spinning preparatory, spinning and doubling (twisting) machinery Tubes for ring-spinning, doubling and twisting spindles, taper 1;. 38 and 1; 64 ICS 59.120.10 W90 National Standards of People's Republic of China GB/T 24371-2009/ISO 368.2006 Spinning preparatory, spinning and doubling (twisting) machinery Ring, and twist spindle with a bobbin Taper 1.38 and 1.64 (ISO 368.2006, IDT) Posted 2009-09-30 2010-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is equivalent to using ISO 368.2006 "Spinning preparatory, spinning and doubling (twisting) machinery ring, and twist bobbin spindle taper 1.38 and 1.64 "(in English). This standard is equivalent translation ISO 368.2006. For ease of use, this standard ISO 368.2006 made the following editorial changes. a) "ISO 368" replace the word "GB/T 24371"; b) Remove ISO 368.2006 Foreword; c) Chapter 2, "Normative references" be replaced by "normative references" and using GB/T 1.1-2000 specified in the introductory phrase; d) with a decimal symbol instead of as the decimal point symbol ",". ","; e) Figure 1, Figure 2 represents a cross-sectional symbol for the metal to non-metal sectional symbols, all symbols to beat the benchmark in italics with small circle Mother and coarse dash connected geometric tolerance control frame represents the whole beating hollow arrows to solid arrows. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Three Friends of Zhejiang Plastic Industry Co., Ltd., Henan First Textile Equipment Co., Ltd., Shaanxi Textile Equipment RESEARCH The study. The main drafters of this standard. water conservancy Hou, Zhao Yusheng, Zhang Nan, Jiangchuan Liang, Zhanggen Fang, Zhao Gang. GB/T 24371-2009/ISO 368.2006 Spinning preparatory, spinning and doubling (twisting) machinery Ring, and twist spindle with a bobbin Taper 1.38 and 1.64

1 Scope

This standard specifies the 1.38 and 1.64 taper ring, and twist bobbin dimensions (length and diameter) and allow full jump Move, also provides a test gauges bobbin dimensions and tolerances.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 286-2. limit deviations of standard tolerance grades and hole axis. 1988 ISO system of limits and fits - Part 2

3 Dimensions and tolerances

3.1 bobbin 3.1.1 Type bobbin Figure 1a) the provisions of the bobbin without the volume header is shown in A, Fig. 1b flat coil bobbin head Provisions) shown in the B type. 3.1.2 Size Bobbin specifications should use the size specified in Table 1. 3.1.3 Full runout It allows full runout Tr shall comply with the provisions in Table 1, total runout measurement prescribed in Figure 2. 3.2 gauge Gauge should comply with the provisions of Table 2 dimensions and tolerances.

4 bobbins and gauges

4.1 bobbin Figure 1, Figure 2 and Table 1. Millimeters a) There shall be no head bobbin --- A Type Figure 1 bobbin GB/T 24371-2009/ISO 368.2006 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24371-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24371-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24371-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24371-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.