GB/T 23842-2009 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23842-2009: General method for the determination of silicon content of inorganic chemicals -- Reduced molybdosilicate spectrophotometric method Status: Valid
Basic dataStandard ID: GB/T 23842-2009 (GB/T23842-2009)Description (Translated English): General method for the determination of silicon content of inorganic chemicals -- Reduced molybdosilicate spectrophotometric method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G10 Classification of International Standard: 71.060.01 Word Count Estimation: 12,187 Date of Issue: 2009-05-18 Date of Implementation: 2010-02-01 Adopted Standard: ISO 6382-1981, MOD Regulation (derived from): PRC National Standard Approval Announcement 2009 No.6 (Total No.146) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the general method of inorganic chemical products Determination of silicon-silicon molybdenum salt reduction spectrophotometry. This standard applies to common inorganic chemical products measured in silicon content. Preparation of test solution is analyzed product should refer to the specific product standards being tested liquid SiO2 content ranges should interfere limit given in Appendix C in 2��g ~ 200��g. GB/T 23842-2009: General method for the determination of silicon content of inorganic chemicals -- Reduced molybdosilicate spectrophotometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. General method for the determination of silicon content of inorganic chemicals. Reduced molybdosilicate spectrophotometric method ICS 71.060.01 G10 National Standards of People's Republic of China General method for determination of silicon content of inorganic chemical products Restore silicon molybdate salt spectrophotometric method (ISO 6382. 1981, MOD) Posted 2009-05-18 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis revised standard adopts ISO 6382. 1981 "General method for determination of silicon content --- reducing silicon molybdate spectrophotometry." Taking into account the differences in the scope and application of the conditions in the use of ISO 6382. 1981, the present standards were amended as appropriate. For technical Differences have been incorporated into the text. We give a list of these technical differences and the reasons in Appendix A and Appendix B of this standard is given in chapter Article number with ISO 6382. 1981 corresponding controls. The Standard Appendix A, Appendix B and Appendix C are informative appendices. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee chemical inorganic chemicals Club (SAC/TC63/SC1) centralized. This standard is mainly drafted by. Fluoride Chemicals Co., Ltd., CNOOC Tianjin Chemical Research & Design Institute. The main drafters of this standard. Xu Jin Xue, FAN Guo-qiang, Li Yongqiang. General method for determination of silicon content of inorganic chemical products Restore silicon molybdate salt spectrophotometric method1 ScopeThis standard specifies the general method of inorganic chemical products, silicon content determination --- reducing silicon molybdate salt spectrophotometric method. This standard applies to the general method of inorganic chemical products Determination of silicon content in. Preparation of the test solution should be analyzed with reference to specific product standard products Accurate, to be tested in the SiO2 content of the liquid should be in the range of 2μg ~ 200μg, interference limits are given in Appendix C.2 Normative reference standardThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD) Preparation of HG/T 3696.2 inorganic chemical products, chemical analysis of impurity standard solution Preparations of HG/T 3696.3 inorganic chemical products, chemical analysis Principle 3 In the presence of hydrochloric acid, sodium fluoride-treated sample, so that any form of polysilicon depolymerization. Masking interfering with boric acid fluoride ion, at pH Was 1.1 ± 0.2, the solution state silicon oxide is formed (yellow) silicon molybdate. In the presence of oxalic acid, sulfuric acid medium in sufficient strength, the selective reduction of silicon molybdate complexes, to eliminate the interference of phosphate. The maximum absorption wavelength (815nm) at spectrophotometrically measuring the absorbance of the blue complex.4 Safety TipsReagents and materials used in this standard has a toxic and corrosive, the operation need to be careful! Avoid contact with skin and eyes. Should immediately wash with water splashing such as the skin or eyes, severe cases should be treated immediately.5 General ProvisionsThe criteria used in the analysis of analytical reagent-free silicon as possible, the water is third grade GB/T 6682-2008 specified in Water distillation equipment by secondary quartz distilled water or equivalent purity water, demineralized water is not appropriate. All reagents should store in silicon-free material (such as Polyethylene) bottles made. The reagents used are by analytical reagents used in the tests impurity standard solution, preparations and products, did not indicate in its He requested, according to HG/T 3696.2, HG/T 3696.3 regulations prepared.6 ReagentsSulfuric acid solution was 6.1. 1 + 3. Hydrochloric acid solution was 6.2. 1 + 2. 6.3 boric acid solution. a saturated solution at room temperature (about 48g/L). 6.4 oxalate dihydrate (H2C2O4 · 2H2O) solution. 100g/L. 6.5 NaF solution. 20g/L, the solution was stored in bottles made of non-silicon material. 6.6 Dibasic sodium molybdate dihydrate. 140g/L. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23842-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23842-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23842-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23842-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
