Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 23369-2009 English PDF

US$149.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23369-2009: Standard test method for determination of magnetic saturation (MS) of cemented carbides
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 23369-2009149 Add to Cart 2 days Standard test method for determination of magnetic saturation (MS) of cemented carbides Valid

Similar standards

GB/T 23367.1   GB/T 33819   GB/T 19587   GB/T 45330   GB/T 23370   

Basic data

Standard ID: GB/T 23369-2009 (GB/T23369-2009)
Description (Translated English): Standard test method for determination of magnetic saturation (MS) of cemented carbides
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H16
Classification of International Standard: 77.160
Word Count Estimation: 5,524
Date of Issue: 2009-03-19
Date of Implementation: 2010-01-01
Adopted Standard: ASTM B886-2003, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.3 (Total No.143)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard applies to magnetic saturation induction was determined by measuring the magnetic saturation carbide sintered powder materials and products. This standard does not raise safety issues related to the user prior to use shall establish appropriate safety and health practices. And determine their adaptation range.

GB/T 23369-2009: Standard test method for determination of magnetic saturation (MS) of cemented carbides


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for determination of magnetic saturation (MS) of cemented carbides ICS 77.160 H16 National Standards of People's Republic of China Carbide magnetic saturation (MS) is measured Standard Test Method Posted 2009-03-19 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ASTMB886-2003 "Standard Test Method for Carbide magnetic saturation (MS) assay." This standard has the following differences compared with ASTMB886-2003. --- Increasing the normative references; --- Made some modifications and textual format. The standard proposed by China Nonferrous Metals Industry Association. This standard Nonferrous Metals by the National Standardization Technical Committee. This standard by Zhuzhou Cemented Carbide Group Co., Ltd. is responsible for drafting. The main drafters of this standard. Luo Long, Zhang Weidong. Carbide magnetic saturation (MS) is measured Standard Test Method

1 Scope

This standard applies to magnetic saturation induction meter measuring magnetic saturation carbide powder material and sintering products. This standard does not raise safety issues related to users prior to use shall establish appropriate safety and health practices and determine the Adaptation range.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3500 PM term (GB/T 3500-2008, IDTISO 3252.1999) ASTMA340 Symbols and definitions of terms related to the magnetic measurements ASTME1316 Terminology for nondestructive testing

3 Terms and Definitions

GB/T 3500, ASTMA340, terms and definitions established ASTME1316 apply to this standard. Principle 4 Stable test sample placed in a magnetic field, the magnetic field by the permanent magnet or DC coils. Sample in a magnetic field reaches saturation magnetization State and converted into the total amount of the binder phase sample magnetizable induction current is generated in the induction coil measuring device. The induced currents And is proportional to the percentage of the total amount of the binder phase in the test sample magnetizable, can be calculated by measuring the current induced magnetic saturation of the sample.

5 Uses

5.1 standard is applicable to sintered carbide NDT magnetization binder phase can also be used to indirectly measure the carbon content in the sample. 5.2 standard can measure the relative content of the magnetic sample binder phase of cobalt, nickel, iron, etc. by magnetic saturation measurement to determine the products An amount ranging from cobalt, nickel, iron and other magnetic substances. 5.3 Determination of magnetic saturation can be used to determine the quality of the powder material.

6 Factors

6.1 and can not be directly measured absolute magnetic saturation of the sample, measuring the magnetic saturation of standard reference material from relatively. 6.2 magnetic saturation measurement is a non-destructive measurement of the whole, it is the measured results of the entire test sample average, it can not be used to infer the magnetic Availability substance corresponding distribution. 6.3 magnetic saturation measuring the size and shape of the specimen by the impact, especially on form factor. 6.4 small specimens or magnetic binder phase concentration is relatively low sample may not measure its magnetic saturation, which is due to the low concentration so that the magnetic binder phase Was instrumental induction coil area can not be detected induced current.

7 Device

7.1 equipment to make the sample in a magnetic field to reach saturation magnetization and the induced magnetic field.
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23369-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23369-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23369-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23369-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.