|
||||||||||||||||||||||||||||||||||||
GB/T 23319.3-2010 English PDFUS$174.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23319.3-2010: Textiles -- Determination of spirality after laundering -- Part 3: Woven and knitted garments Status: Valid
Basic data
GB/T 23319.3-2010: Textiles -- Determination of spirality after laundering -- Part 3: Woven and knitted garments---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Textiles Determination of spirality after laundering Part 3. Woven and knitted garments ICS 59.080.30 W04 National Standards of People's Republic of China Skew then measured after laundering textiles Part 3. woven garments and knitwear Part 3. Wovenandknittedgarments (ISO 16322-3.2005, IDT) Issued on. 2011-01-14 2011-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 23319 "after washing textiles skew determination" includes the following three parts. --- Part 1. knitwear wale skew changes; --- Part 2. woven and knitted fabrics; --- Part 3. woven garments and knitwear. This is Part 3 GB/T 23319 of. This section uses the translation method identical with ISO 16322-3.2005 Determination of skew Part 3 "after washing Textiles. Woven Apparel And knitted garments "(in English). This part of ISO 16322-3.2005 has the difference compared to the following editorial. --- Deleted international standards foreword; --- Normative references by our standards instead of the international standard; --- 3.1 in terms of interpretation made editorial changes; --- 8.2 provides specific position point A and point B; --- Chapter 10 increases the accuracy torsional slope. This part is proposed by the China Textile Industry Association. This part of the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized. This section is drafted. Textile Standard (Beijing) Co., Ltd. Inspection and Certification Center, National Textile Products Quality Supervision and Inspection Center. The main drafters of this section. Wang Huan. Skew then measured after laundering textiles Part 3. woven garments and knitwear1 ScopeThis section GB/T 23319 specifies the measurement of woven and knitted garments after washing skew method. The test results obtained by different methods may not be comparable. This section applies to skew measurements after washing clothes, rather than forming skew garment manufacturing for. Note. Some fabric structure, such as denim intentionally formed in the production process skew. Clothing made of fabric produced by circular knitting machines may form inherent Non-shaped vertical stripe arrangement.2 Normative referencesThe following documents contain provisions which, through this part of GB T 23319 references/constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 6529 Textiles conditioning and testing using standard atmosphere (GB/T 6529-2008, ISO 139.2005, MOD) GB/T 8629 Textiles - Domestic washing and drying test procedures (GB/T 8629-2001, eqv ISO 6330.2000)3 Terms and DefinitionsThe following terms and definitions apply to this part of the GB/T 23319 of. 3.1 Skew spirality Woven fabric or knitted fabric clothing in the washing process, due to the release of stress and potentially lead to different parts of the clothing (usually horizontal Distortions to occur). NOTE. This phenomenon is sometimes made of fabrics made from twisted yarn will appear, such as denim jeans, twisted legs. Principle 4 In accordance with the procedure of sample preparation, washed and labeled, skew value measured in millimeters, with the percentage of the length of the mark Rate as a measurement result.5 Instruments5.1 automatic washing machines, according to GB/T 8629 stipulates that the washing machine types consultation. 5.2 automatic dryer, according to GB/T 8629 stipulates that by the consultation. 5.3 ruler, length of at least 500mm, indexing is 1mm. 5.4 T-square, a length of at least 500mm. 5.5 The humidity frame. The humidity 6 Before marking, measuring the sample, according to GB/T 6529 provisions of the humidity test sample garments in the standard atmosphere for at least 4h. ...... |