GB/T 22907-2008 English PDFUS$834.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22907-2008: The photometry and goniophotometry of luminaires Status: Valid
Basic dataStandard ID: GB/T 22907-2008 (GB/T22907-2008)Description (Translated English): The photometry and goniophotometry of luminaires Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K72 Classification of International Standard: 29.140.40 Word Count Estimation: 42,488 Date of Issue: 2008-12-30 Date of Implementation: 2009-09-01 Adopted Standard: CIE 121-1996, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 25 of 2008 (total 138) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the general requirements for luminaires. This standard specifies the conditions for photometric testing standards, and recommended testing procedures so as determined by the luminaire photometric characteristics and presentations with sufficient accuracy and reproducibility, these provisions provide a basis for the harmonization of national standards, and to photometric experiments room lighting performance testing and provide guidance on the expression data. For the actual test conditions differ from the standard test conditions of lamps, standard correction factor given measurement requirements. For laboratory personnel and engineers, a detailed description of photometric method is the most important, for it is equally important for data users. The proper interpretation of the data involved are usually relies on a good understanding of the measurement process, meanwhile, is also provided to the user of this standard to understand the expression of photometric measurement procedures and data. Facility design is highly specialized type of special lighting for measurement and data related to the specific recommendations expressed requirements have needs, such common standards can not cover its characteristics, should be a lot of complementary standards to meet this need, these standards will complement the standards referenced within the appropriate section, and when necessary to define special requirements and measurement conditions. No specific criteria for coverage of lamps, you can use the most appropriate standards and the requirements of the common standards to guide the actual measurement procedure. GB/T 22907-2008: The photometry and goniophotometry of luminaires---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.The photometry and goniophotometry of luminaires ICS 29.140.40 K72 National Standards of People's Republic of China GB/T 22907-2008/CIE121-1996 Photometric luminaire photometric testing and distribution of school (CIE121-1996, IDT) Posted 2008-12-30 2009-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅴ Introduction Ⅵ 1 Introduction 1 1.1 Scope 1 1.2 1 photometric properties Terminology 1 2 2.1 The term of lamps 1 2.2 The term test fixture parameter 2 2.3 The term measure 3 2.4 The term test equipment 3 Photometric fixture coordinate system 3 4 3.1 General Part 4 3.2 goniophotometers basic requirements 4 3.3 Coordinate System 4 3.4 Plane Survey System 5 3.4.1 A- 5 plane 3.4.2 B- plane 6 3.4.3 C- plane 7 3.4.4 relationship 7 Laboratory tests of claim 8 4 4.1 General 8 4.2 8 standard test conditions 4.2.1 Test Room 8 4.2.2 The test light source 8 4.2.3 Test ballast 8 4.2.4 Test fixture 8 4.2.5 The test voltage 9 4.3 Test conditions existing 9 4.3.1 changes in ambient temperature 9 4.3.2 airflow 9 4.3.2.1 source or luminaire sports 9 4.3.2.2 airflow and air conditioning 9 4.4 photometric device 9 4.4.1 Distribution photometer illuminance meter of claim 9 4.4.1.1 Calibration 10 4.4.1.2 Linear 10 4.4.1.3 Fatigue 10 4.4.1.4 Response time 10 GB/T 22907-2008/CIE121-1996 4.4.1.5 Spectral Response 11 4.4.1.6 temperature 11 4.4.1.7 cosine response 11 4.4.2 auxiliary light source for monitoring the probe request 11 4.4.3 a collimating photometer head of claim 12 4.4.4 goniophotometers requirements 12 4.5 Other laboratory equipment 12 4.5.1 Power 12 4.5.2 Electrical measuring equipment 12 4.5.3 Electrical circuit 13 4.5.4 Temperature measuring device 13 5 light sources, ballasts and lighting test equipment 13 5.1 light source 13 5.1.1 General requirements for all kinds of light sources 13 Light Center 5.1.2 source 13 5.1.3 Special requirements for different types of light sources 14 5.1.3.1 incandescent tungsten halogen light source 14 5.1.3.2 tubular and compact fluorescent lamps (including mercury Qi Guangyuan) 15 5.1.3.3 high pressure mercury vapor light source 15 5.1.3.4 metal halide light source 16 5.1.3.5 Low pressure sodium lamp 16 5.1.3.6 HPS 17 5.2 Test ballasts 17 5.3 test fixture 17 5.3.1 the choice of lighting and operating 17 5.3.2 luminaire photometric center 17 6 photometric test methods and practical test program 18 6.1 General 18 6.1.1 Test Method Absolute 18 18 6.1.2 Test Method Relative 6.1.3 luminaire photometry 19 6.1.3.1 photometry 19 6.1.3.2 aided measurement 19 6.1.3.3 Exporting Data 19 6.1.4 The total measurement requirements 19 6.2 measuring intensity of light 20 6.2.1 Distribution photometer 20 6.2.1.1 Objective 20 6.2.1.2 Structure 20 6.2.1.3 stray light blocking mask 20 6.2.1.4 Test distance (based on measurement of the luminosity distance law) 21 Select 6.2.1.5 sources, ballasts and luminaires 21 6.2.2 Test Fixture 21 GB/T 22907-2008/CIE121-1996 6.2.2.1 Installation 21 6.2.2.2 Measurement 21 6.2.2.3 polarization measurements 21 6.2.3 Test bare lamp 21 6.2.3.1 Installation 21 6.2.3.2 Measurement 22 6.3 Luminous flux test 22 6.3.1 General 22 6.3.2 Light insist plot Act 22 6.3.2.1 Objective 22 6.3.2.2 goniophotometer correlation calculations 22 6.3.3 Integral photometer 23 6.3.3.1 Objective 23 6.3.3.2 Structure 23 6.3.3.3 sources, ballasts and luminaires choice 23 6.3.3.4 bare lamp installation and measurement 23 6.3.3.5 luminaire installation and measurement 23 6.3.3.6 sources of error 23 6.4 lamps light output ratio 24 6.4.1 General 24 6.4.2 The recommended light output ratio 24 6.4.3 Procedures for measuring light output ratio 25 6.4.3.1 single light source lamp 25 6.4.3.2 more light fixtures 25 6.5 brightness Testing 25 6.5.1 General 25 6.5.2 Average luminance 25 6.5.3 spot brightness 25 6.5.3.1 Measuring luminance meter 26 6.5.3.2 Measurement with goniophotometer 26 Illuminance measurement 26 6.6 6.6.1 General 26 General Requirements 6.6.2 Measurement 26 6.6.2.1 measuring device 26 6.6.2.2 sources, ballasts and luminaires choice 26 6.6.3 measurement program 26 7 photometric correction factor 27 7.1 General 27 7.2 Measurement correction factor 27 7.2.1 Objective 27 7.2.2 confirm 27 7.2.2.1 Methods Total 27 7.2.2.2 lamps in a nonstandard location correction factor measurements (monitoring source approach) 27 GB/T 22907-2008/CIE121-1996 7.2.2.3 temperature correction factor 27 7.3 conversion factor 28 7.3.1 Objective 28 7.3.2 OK 28 7.3.2.1 General 28 7.3.2.2 25 ℃ ambient temperature of the non-use conversion factor 28 7.3.2.3 For mercury Qi Guangyuan conversion factor (method analog light source) 28 7.4 ballast lumen factor 29 7.4.1 Objective 29 7.4.2 OK 29 8 expression and accuracy of test results 29 The accuracy of measurement 29 8.1 Sources 8.1.1 Error 30 8.1.1.1 systematic errors that may exist 30 8.1.1.2 Possible random error 30 8.1.2 Uncertainty 31 8.2 Test results presentation 31 8.2.1 General 31 8.2.2 Test Report 31 8.2.2.1 Profiles 31 8.2.2.2 Photometric data 32 References 33 GB/T 22907-2008/CIE121-1996ForewordThis standard is equivalent to using CIE121-1996 "luminaire photometry and photometric distribution." For ease of use, this standard made the following editorial changes. The term a) "The technical report" to the "standard"; b) use a decimal point instead of a decimal point ",". ","; c) Remove CIE121-1996 preface. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee of electrical lighting (SAC/TC224) centralized. This standard was drafted. National Lighting Fitting Quality Supervision and Inspection Center, the National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Shanghai era Lighting Appliance Co., Ltd. detection. The main drafters of this standard. Wang Ye, Shi Xiaohong, Zhang Fang steel. GB/T 22907-2008/CIE121-1996IntroductionThis standard provides general requirements for indoor lighting and road lighting photometric tests, and include the following information. a) standard test conditions, and under this condition, the actual error is acceptable; b) the light source and luminaire selection procedures; c) luminaire photometric properties of the measurement procedures and possible sources of error in evaluation procedures; d) correction factor and conversion factor services; e) the expression of test results. This standard provides a comprehensive practical guidance for industrial laboratories and have enough information to replace the standard CIE24-1973 "Type of indoor lighting photometric test" and CIE27-1973 "road lighting photometric test." With regard to the more specific types of lamps CIE will publish a supplementary report. GB/T 22907-2008/CIE121-1996 Photometric luminaire photometric testing and distribution of school1 Introduction1.1 Scope This standard contains requirements for the most common types of lamps photometric testing. This standard specifies the standard conditions photometric tests, and recommended testing procedures, the lamp photometric properties determined and reported statements Sufficient accuracy and reproducibility, these provisions provide for the harmonization of national standards based and photometric laboratory tests and luminaire performance data Expression guidance. For the actual test conditions differ from the standard test conditions of lighting, standard measurement requirements are given correction coefficient. For laboratory personnel and engineers, the detailed description of the photometric method is the most important, for it is this same user data important. Proper interpretation of the data is generally dependent on the full understanding of the processes involved in the measurement, at the same time, this standard is also provided to the user to understand Photometric measurement procedures and data expression. As a special type of highly specialized facilities lighting design, measurement, and data related to the special requirements of expression recommended when there is a demand, through such Can not cover its standard features, application in a number of complementary standards to meet this need, these additional standards will be referenced in the appropriate sections of this standard, And define specific requirements and measurement conditions when necessary. For there is no specific standard covers lamps, you can use the most appropriate standards and the requirements of the common standards to guide the actual measurement program. 1.2 photometric properties Measured photometric properties may be divided into characteristics, i.e., those experimentally to directly measure, as well as derived characteristic, i.e., from the measured Calculation of the amount of data obtained. Derivation properties closer related to lighting applications. This standard relates photometric characteristics are measured.2 TermsIt contains only directly related to the definition. Some terms used in this standard may be listed in other standards under a different name (in square brackets Within the given number) appears. Other relevant definitions, see CIE/IEC 17.4-1987 [1]. 2.1 The term of lamps 2.1.1 Those who can be assigned, revealing or changing one or more light an instrument that emits light, and includes a support, fixing and protecting the light source required All components (but not including the light source itself), and a circuit necessary auxiliary devices and connected them with the power supply unit. 2.1.2 Lighting design work posture (refer to the manufacturer's instructions or common way to determine). 2.1.3 Attitude of the lamp being tested. Note. If not otherwise indicated, to take consistent with the design attitude. 2.1.4 Used photometric testing and origin calculation. GB/T 22907-2008/CIE121-1996 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22907-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22907-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22907-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22907-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
