GB/T 22792.3-2008 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22792.3-2008: Office furniture -- Screens -- Part 3: Test methods
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22792.3-2008	279	Add to Cart	3 days	Office furniture -- Screens -- Part 3: Test methods	Valid

Similar standards

GB/T 22793   GB/T 14532   GB/T 14531   GB/T 24820   GB/T 22792.1   GB 22792.2   

Basic data

Standard ID: GB/T 22792.3-2008 (GB/T22792.3-2008)
Description (Translated English): Office furniture -- Screens -- Part 3: Test methods
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y81
Classification of International Standard: 97.140
Word Count Estimation: 12,115
Date of Issue: 2008-12-30
Date of Implementation: 2009-09-01
Adopted Standard: EN 1023-3-2000, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.25 (Total No.138)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the size of the office wall, General safety requirements and test methods for structural safety requirements. This section applies to an office wall.

GB/T 22792.3-2008: Office furniture -- Screens -- Part 3: Test methods

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Office furniture Screens Part 3. Test methods ICS 97.140 Y81 National Standards of People's Republic of China Office furniture - Screens - Part 3. Test methods Posted 2008-12-30 2009-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 1 General test conditions 5 test facility 2 6 Test Method 2 7 Test Report 4 Appendix A (normative) visual inspection method 5 Annex B (informative) Inspection Rule 6

Foreword

GB 22792 "Office furniture screen" is divided into three parts. --- GB/T 22792.1 "Office furniture - Screens - Part 1. Dimensions"; --- GB 22792.2 "Office furniture - Screens - Part 2. Safety requirements"; --- GB/T 22792.3 "Office furniture - Screens - Part 3. Test methods." This section is part of 3 GB 22792. The partial modification of the use of EN1023-3.2000 "Office furniture - Screens - Part 3. Test methods." This portion of EN1023-3. Compared to 2000, the main changes are as follows. --- Modify the scope of the provisions of the Stability and test methods for structural changes for the office screen provides office screen ruler Inch, safety requirements and test methods for general structural safety requirements; --- Measured increase screen size; --- Increase measurement screen general safety requirements; --- Delete international standards informative overview of elements (including the cover, directory, foreword and introduction); --- Increase in Appendices A and B. Appendix A of this section is normative appendix, Appendix B is an informative annex. This part is proposed by the China National Light Industry Council. This part of the furniture by the National Standardization Center centralized. This part of the main drafting unit. Shanghai Quality Supervision, Inspection Technology Research Institute, Beijing Furniture Industry Association, Zhejiang Fangyuan Detection Group shares Parts Limited, Shenzhen Academy of Metrology and Quality Inspection, wood furniture, Beijing Quality Supervision, Inspection Station, Beijing Liming Wen-Furniture Co. the company. Participated in the drafting of this section. Zhejiang Sunon Furniture Manufacturing Co., Huayuan Xuan Furniture (Shenzhen) Co., Ltd., Shenzhen Hammer Industries Development Co., Ltd., Guangdong Oriental Furniture Co., Ltd., Shanghai Aurora Furniture Co., Ltd., Guangzhou Paliburg Industrial Co., Ltd., Zhuhai Lai Induced Matheson office furniture Limited, Beijing this holy Mei Furniture Manufacturing Co., Ltd., Ningbo Steel Co., Ltd of emerging intelligent, Beijing Century Beijing Thai Furniture Co., Ltd. Gifted than (China) Co., Ltd., Beijing O SigmaTel Furniture Co., Ltd. Hebei Jeroen furniture. The main drafters of this section. Liu Yao country, Luoju Fen, Liu Wenzhi, Mega Liang, Luo, Zhang Shuyan, Dr. Shou Tian, \u200b\u200bNi Liang positive, Lisheng Guo, Li Yao Yi,? Chenbi Huang, Liao Weifeng, Li Jun. Office furniture - Screens - Part 3. Test methods

1 Scope

This section GB 22792 specifies the screen size of the office, the general safety requirements and test methods for structural safety requirements. This section applies to the office wall.

2 Normative references

The following documents contain provisions which, through reference in this Part of GB 22792, constitute provisions of this part. Cited documents dated, its All subsequent amendments (not including errata content) or revisions do not apply to this section, however, encourage each agreement under this section Are Prescriptions can use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan GB 22792.2-2008 Office furniture - Screens - Part 2. Safety requirements (EN1023-2.2000, IDT)

3 Terms and Definitions

The following terms and definitions apply to this part of GB 22792. 3.1 Various furniture components connected to the screen (tables, shelves, wall cabinets, sliding lateral file drawers, etc.).

4 General test conditions

The manufacturer shall indicate the recommended installation method in the user manual wall structure, components, and how to use the screen with different accessory connection Wind, as well as the maximum load for each type of screen (kilograms per meter on the screen width of the loaded). If the screen is not designed for this test procedure should be possible to carry out the test according to the description, and indicate any deviations in the test report. when Screen design does not satisfy the test procedure, the test report should be as described and claimed any deviation from the implementation of these tests. 4.1 early test preparation Before any trial began, the sample should be placed for a time sufficient to ensure adequate strength of its formation, for gluing pieces of wood and the like, Between the production and testing, should be stored at normal room environment at least four weeks. Annex on the screen, should be examined in delivery. Detachable attachment should follow the instructions provided by the assembly, if the furniture can be different The way the assembly or assembly, each test should be the most unfavorable combination. It should detachable fastening member before the test. Each test, all parts should be in the most unfavorable position. The test shall be in normal indoor environment conditions, if the test the ambient temperature exceeds the range of 15 ℃ ~ 25 ℃, it should test Report recording the highest and/or lowest temperature. 4.2 Test Equipment Strength test, energizing should be sufficiently slow to ensure that the dynamic load can be ignored. Because test results are not dependent on the device, so any suitable device can be loaded and afterburner test. Unless otherwise specified, the loading pad should be fixed, but can rotate around a fulcrum, so that the testing process does not prevent the mobile screen. 4.3 Accuracy Unless otherwise specified, shall meet the following measurement accuracy. --- All loading force measurements should be accurate to ± 5%; --- All size measurements should be accurate to ± 1mm; --- All quality measurements should be accurate to ± 1%; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22792.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22792.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22792.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22792.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.