GB/T 22513-2023 English PDFGB/T 22513: Historical versions
Basic dataStandard ID: GB/T 22513-2023 (GB/T22513-2023)Description (Translated English): Petroleum and natural gas drilling and production equipment - Wellhead and tree equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E92 Classification of International Standard: 75.180.10 Word Count Estimation: 292,229 Date of Issue: 2023-05-23 Date of Implementation: 2023-12-01 Older Standard (superseded by this standard): GB/T 22513-2013 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 22513-2023: Petroleum and natural gas drilling and production equipment - Wellhead and tree equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 75.180.10 CCSE92 National Standards of People's Republic of China Replace GB/T 22513-2013 Oil and gas drilling equipment wellhead devices and Christmas trees Published on 2023-05-23 Implemented on 2023-12-01 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface V 1 Scope 1 2 Normative reference documents 2 3 Terms and Definitions 4 4 Abbreviations 13 5 Usage performance 14 5.1 General 14 5.2 Conditions of use 14 6 Design 19 6.1 Design Method 19 6.2 Design tolerance 20 6.3 Design documents 20 6.4 Design review and design verification20 6.5 Design Confirmation 20 7 Materials 20 7.1 General 20 7.2 Written Specifications 21 7.3 Body, cover, end and outlet connections 21 7.4 Qualification test specimen (QTC) 26 7.5 Qualification of heat treatment equipment 30 8 welding 31 8.1 General 31 8.2 Welding of non-pressure-bearing parts other than surfacing 31 8.3 Assembly welding of pressure-bearing parts 31 8.4 Repair welding of pressure-bearing parts 34 8.5 Surfacing 35 9 Bolt 37 9.1 Closed bolting 37 9.2 Closed bolting of flanged, studded end and outlet connections38 9.3 Other closed bolting 42 10 Isolation mechanisms, accessories, pressure boundary penetrations and end connections 42 10.1 Packing mechanism of locking screws, positioning pins and stop screws 42 10.2 Pressure boundary penetrations and accessories 43 10.3 Test, instrumentation, relief, and injection port connections 44 11 Quality Control45 11.1 General requirements 45 11.2 Measuring and testing equipment 46 11.3 Personnel qualifications46 11.4 Quality control requirements for devices 47 12 Factory Acceptance Test (FAT) 66 12.1 General 66 12.2 Hydrostatic pressure test 68 12.3 Air seal test-PSL3G, PSL4 72 12.4 Diameter test 74 13 signs 76 13.1 Requirement 76 13.2 Method 76 13.3 Nameplate 76 13.4 Signs of covered areas77 13.5 Marking of threads 77 13.6 Marking of specifications 78 13.7 Signs of temperature 78 13.8 Markings for hardness testing 78 13.9 Marking of gasket ring groove 78 13.10 Clamp hub end connection 78 14 Storage and transportation78 14.1 Emissions after test 78 14.2 Anti-corrosion 78 14.3 Protection of sealing surfaces 78 14.4 Assembly and maintenance instructions 79 14.5 Gasket ring 79 14.6 Aging control of non-metallic seals 79 15 Special requirements for equipment 79 15.1 General 79 15.2 Flanged end and outlet connections 79 15.3 Gasket ring 97 15.4 Threaded end and outlet connections 103 15.5 tees and crosses 109 15.6 Pipe blocking 118 15.7 Valve disassembly and plugging 120 15.8 Top connection device 129 15.9 Conversion connection device 130 15.10 Other end connections (OEC) 135 15.11 Reducing connecting cross and transition cross 135 15.12 Valve 137 15.13 Back pressure valve 150 15.14 Casing hanger and tubing hanger (mandrel type and slip type) 150 15.15 Casing head shell and oil (casing) pipe head four-way 157 15.16 Throttle valve 163 15.17 drive 167 15.18 Safety valves, landing shut-off valves (BSDV) and actuators 170 15.19 Xmas tree 173 15.20 Multi-pass fracturing head 174 16 records 177 16.1 General 177 16.2 Records to be kept by the manufacturer177 16.3 Records that should be provided to users180 16.4 Records of surface safety valves (SSV), submersible safety valves (USV) and landing shut-off valves (BSDV) 181 Appendix A (Informative) Product Specification Level (PSL) Recommended Practice 184 Appendix B (Informative) Ordering Guide 187 Appendix C (informative) Design and determination of ratings of high-temperature devices 203 Appendix D (informative) Qualification of heat treatment equipment 207 Appendix E (informative) Recommended welding preparation design dimensions 209 Appendix F (Normative) PR2 Design Validation Procedure (PR2F) 213 Appendix G (informative) Recommended closure bolt assembly 241 Appendix H (informative) Recommended length of bolts 246 Appendix I (Normative) Weld neck flange 258 Appendix J (Normative) Sector flange 261 Appendix K (normative) Top connection device 264 Appendix L (informative) Technical requirements for supersonic spraying of tungsten carbide 272 Appendix M (Normative) Design Confirmation Procedure for Safety Valve 273 Reference 283ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 22513-2013 "Wellhead devices and Christmas trees for drilling and production equipment in the oil and gas industry" and is consistent with Compared with GB/T 22513-2013, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Added some definitions (see Chapter 3); b) Added material code 95K (see Chapter 7); c) Changed the content of quality control, and compiled the factory acceptance test into a separate chapter (see Chapter 11, Chapter 12,.2013 version of Chapter 7); d) Added some flange and valve specifications (see 15.2); e) Added requirements for valve stems (see 15.12.2.1); f) Added requirements for hardening process of valve sealing mechanism (see 15.12.3.4); g) The fracturing head multi-pass is added (see 15.20); h) The content of repair and remanufacturing has been deleted (see Chapter 11, Appendix N of the.2013 edition). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed and coordinated by the National Petroleum Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96). This document was drafted by. PetroChina Jianghan Machinery Research Institute Co., Ltd., Baoji Petroleum Machinery Co., Ltd., Jiangsu Hongtai Petrochemical Machinery Machinery Co., Ltd., Jianhu County Hongda Valve and Pipe Fittings Co., Ltd., Chongqing Xintai Machinery Co., Ltd., China Petroleum Corporation Chuanqing Drilling Engineering Co., Ltd. Safety and Environmental Protection Quality Supervision and Inspection Research Institute, Suzhou Dawson Drilling and Mining Equipment Co., Ltd., Jiangsu Tenglong Petrochemical Machinery Co., Ltd. Division, Jiangsu Xiongyue Petroleum Machinery Equipment Manufacturing Co., Ltd., Jiangsu Suyan Valve Machinery Co., Ltd., China National Petroleum Corporation Southwest Oil and Gas Field Branch, Jiangsu Jinshi Machinery Group Co., Ltd., PetroChina Xinjiang Oilfield Branch Experimental Testing Research Institute, Shaanxi Yanchang Petroleum (Group) Co., Ltd., Shifang Huifeng Oil Production Machinery Co., Ltd., Sichuan Huayu Petroleum Drilling Equipment Co., Ltd., Shengli Oil Tian Shengji Petroleum Equipment Co., Ltd. The main drafters of this document. Wen Zhixiong, Zhang Yushu, Xiao Li, Cao Jia, Sun Juan, Jiang Jinwei, Jiang Yuhu, Zeng Lian, Wu Qichun, Dai Yiming, Han Zhenghai, Xu Xiangyong, Zhan Liangbin, Chen Shanli, Li Chaoming, Wu Qinghe, Pan Jianwu, Sun Hongxiang, Chen Wenbin, Yuan Jie, Wang Bin, Qiu Fushou, Zhang Chuan, Fifth Peak, Yang Wenwu, Shen Junfang, Sun Shuang, Wang Wei. This document was first published in.2008, revised for the first time in.2013, and this is the second revision. Oil and gas drilling equipment wellhead devices and Christmas trees1 ScopeThis document specifies the performance, design, materials, welding, bolting, isolation mechanisms, Accessories, pressure boundary penetrations and end connections, quality control, factory acceptance testing, marking, storage and transportation, installation special requirements and records Require. This document applies to the specific equipment listed below. a) Pipe plugs, connectors and gaskets as defined in this document. 1) Flanged end and outlet connections (see 15.2); 2) Gasket ring (see 15.3); 3) Threaded end and outlet connections (see 15.4); 4) tee, four-way and fracturing head multi-way (see 15.5, 15.20); 5) Pipe blockage (see 15.6); 6) Disassemble and plug the valve (see 15.7); 7) Top connection device of Christmas tree (see 15.8). b) Non-standard pipe plugging and connecting devices. 1) Non-standard Christmas tree top connection device (see 15.8); 2) Conversion connection device (single stud or multi-stud, single-stage or multi-stage) (see 15.9); 3) Other end connection devices (see 15.10); 4) Reducing connecting cross and transition cross (see 15.11). c) Valve. 1) Single valve (see 15.12); 2) Multi-pipe valve (see 15.12); 3) Drive valve (see 15.12); 4) Driver preparation valve (see 15.12); 5) Check valve (see 15.12); 6) Back pressure valve (see 15.13). d) Casing hanger and tubing hanger. 1) Spindle type hanger (see 15.14); 2) Slip type hanger (see 15.14). e) Casing head shell and oil (casing) pipe head cross (see 15.15). f) Throttle valve (see 15.16). g) Drive (see 15.17). h) Safety valves, landing shut-off valves and their drivers (see 15.18). 1) Ground safety valve assembly, driver preparation valve, driver; 2) Underwater safety valve assembly, driver preparation valve, driver; 3) Log in the shut-off valve assembly, driver preparation valve, and driver. i) Christmas trees (see 15.19). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22513-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 22513-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22513-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22513-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 22513-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 22513-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
