GB/T 22459.1-2022 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22459.1-2022: Refractory mortars - Part 1: Determination of consistency using the penetrating cone method Status: Valid GB/T 22459.1: Historical versions
Basic dataStandard ID: GB/T 22459.1-2022 (GB/T22459.1-2022)Description (Translated English): Refractory mortars - Part 1: Determination of consistency using the penetrating cone method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q46 Word Count Estimation: 13,193 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 22459.1-2022: Refractory mortars - Part 1: Determination of consistency using the penetrating cone method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Refractory mortars - Part 1.Determination of consistency using the penetrating cone method ICS 81.080 CCSQ46 National Standards of People's Republic of China Replacing GB/T 22459.1-2008 refractory mud Part 1.Consistency test method (cone penetration method) (ISO 13765-1.2004, MOD) Published on 2022-03-09 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 1 of GB/T 22459 "Refractory Slurry". GB/T 22459 has released the following parts. --- Part 1.Consistency test method (cone penetration method); --- Part 2.Consistency test method (jumping table method); --- Part 3.Test method for bonding time; --- Part 4.Test method for flexural bond strength at room temperature; --- Part 5.Test method for particle size distribution (sieve analysis); --- Part 6.Test method for water content of pre-mixed mud; --- Part 7.Other performance test methods; --- Part 8.Bleeding test method. This document replaces GB/T 22459.1-2008 "Refractory Mud Part 1.Consistency Test Method (Cone Penetration Method)". and Compared with GB/T 22459.1-2008, in addition to structural adjustment and editorial changes, the main technical changes are as follows. a) Modified normative references (see Chapter 2, Chapter 2 of the.2008 edition); b) Changed terms and definitions (see Chapter 3, Chapter 3 of the.2008 edition); c) The structure of the penetrometer has been re-described and drawn (see 5.1.1, 5.1 of the.2008 edition); d) The requirements for the mass of the cone in the equipment have been added (see 5.1.2); e) Changed the requirements for the capacity of the stirring pot and the material of the stirring pot and stirring blade (see 5.2.2, 5.2.3, 5.2.1 and 5.2.2 of the.2008 edition); f) Changed Figure 1 and the description of the index number (see Figure 1, Figure 1 of the.2008 edition); g) Changed Figure 2 and the description of the index number (see Figure 2, Figure 2 of the.2008 edition); h) Changed the sampling regulations for refractory mud (see Chapter 6, Chapter 6 of the.2008 edition); i) Changed the test procedure (see Chapter 7, Chapter 7 of the.2008 edition); j) Added the requirement for numerical rounding (see Chapter 8); k) Changed the test report requirements (see Chapter 9, Chapter 9 of the.2008 edition). This document is revised and adopted ISO 13765-1.2004 "Refractory Mud Part 1.Consistency Test Method (Cone Penetration Method)". Compared with ISO 13765-1.2004, this document has many adjustments in structure, and the comparison list of structure number changes between the two documents See Appendix A for the table. Compared with ISO 13765-1.2004, this document has many technical differences. In the outer margins of the clauses involved, the vertical A straight single line (|) is marked. See Appendix B for a list of these technical differences and their reasons. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Standardization Technical Committee of Refractories (SAC/TC193). This document is drafted by. MCC Wuhan Metallurgical Construction Research Institute Co., Ltd., Wuhan University of Science and Technology, Yixing Morgan Thermal Ceramics Co., Ltd., China Metallurgical Coking Resistance (Dalian) Engineering Technology Co., Ltd., Sinosteel Group Luoyang Refractory Research Institute Co., Ltd., China Metallurgical Testing and Certification Co., Ltd., Qing Institute of Technology. The main drafters of this document. Cheng Shuiming, Xia Changyong, Yin Yucheng, Yin Bo, Zhang Shuang, Yang Jinsong, Yang Jing, Wu Shujun, Chen Gang, Liu Zhiqiang, Li Longfei, Fan Changlong, Wang Hailong, Peng Yan, Wu Longshui, Zheng Yifeng, Jiang Yuheng, Wang Zhenhua. The previous releases of this document and its superseded versions are as follows. This document was first published in.2008 and this is the first revision.IntroductionRefractory mud is generally used as the joint material of refractory masonry, so that the masonry forms a tight whole to resist the damage of external force and prevent gas, Intrusion of molten liquid. Masonry joints are usually the weak link of the masonry, and in most cases are damaged before the masonry, so the quality of the refractory mortar is It is closely related to the overall life of the masonry. The consistency of refractory mud is an important indicator to characterize its construction performance, which directly affects the construction quality of refractory masonry, and will eventually affect the refractory masonry. impact on service life and safety. The first 6 parts of GB/T 22459 are modified and adopted ISO 13765, Part 7 of GB/T 22459 Part 8 and ISO 13765 have no correspondence. GB/T 22459 "Refractory Mud" consists of 8 parts. --- Part 1.Consistency test method (cone penetration method), the purpose is to determine the consistency of refractory mud; --- Part 2.Consistency test method (jumping table method), the purpose is to determine the consistency of refractory mud; --- Part 3.Test method for bonding time, the purpose is to determine the time required for the stability of the bonding of refractory mortar joints when building refractory masonry take time; --- Part 4.Test method for flexural bonding strength at room temperature, the purpose is to determine the resistance of refractory mortar joints after refractory masonry is built. folded bond strength; --- Part 5.Test method for particle size distribution (sieve analysis), the purpose of which is to determine the particle size distribution of refractory mud; --- Part 6.Test method for water content of pre-mixed mud, the purpose of which is to determine the moisture content of pre-mixed mud; --- Part 7.Other performance test methods, the purpose is to determine the refractoriness of refractory mud, high temperature flexural bonding strength, room temperature flexural strength degree, thermal expansion, thermal conductivity, etc.; --- Part 8.Bleeding test method, the purpose is to determine the bleeding performance of refractory mud at rest or under a certain load. This document is part 1, and the other 7 parts belong to the test method for refractory mud, which together constitute the test method for refractory mud system. refractory mud Part 1.Consistency test method (cone penetration method)1 ScopeThis document specifies the principle, equipment, sampling, test procedure, result calculation and test method of refractory mud consistency test method (cone penetration method). inspection report. This document applies to the determination of refractory mud consistency (cone penetration method).2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 4513.2 Unshaped Refractories Part 2.Sampling (GB/T 4513.2-2017, ISO 1927-2.2012, IDT) GB/T 8170 Numerical Rounding Rules and Representation and Judgment of Limit Values GB/T 18930 Refractory Terms (GB/T 18930-2020, ISO 836.2001, MOD)3 Terms and DefinitionsGB/T 18930 and the following terms and definitions apply to this document. 3.1 The viscosity of the refractory slurry in the applied state.4 PrinciplesThe consistency of the refractory grout is determined by the depth to which a specified cone sinks into the specimen.5 Instruments and equipment5.1 Penetration meter 5.1.1 Overview The structure diagram of the penetrometer is shown in Figure 1, which consists of a reading instrument, a measuring rod, a release button, a striker rod, a cone and a sample box. 5.1.2 Cone and striker The cone and the striker are fastened together by screws, with a total mass of 150g±0.25g. The shape and size of the cone are shown in Figure 2, and the mass It is 100g±3g. The tip of the cone is made of stainless steel, and the other parts are made of copper or corrosion-resistant steel. The cone tip and the cone should be tightly combined, and the interface should be No wrong place. The cone surface should be polished and smooth. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22459.1-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 22459.1-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22459.1-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22459.1-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 22459.1-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 22459.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
