GB/T 22159.4-2017 English PDF

US$599.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22159.4-2017: Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22159.4-2017	599	Add to Cart	4 days	Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion	Valid

Similar standards

GB/T 25078.1   GB/T 20247   GB/T 19889.1   GB/T 22159.5   GB/T 22159.2   GB/T 22159.1   

Basic data

Standard ID: GB/T 22159.4-2017 (GB/T22159.4-2017)
Description (Translated English): Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A59
Classification of International Standard: 17.140
Word Count Estimation: 30,398
Date of Issue: 2017-11-01
Date of Implementation: 2018-05-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 22159.4-2017: Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Acoustics and vibration-Laboratory measurement of vibro-acoustic transfer properties of resilient elements-Part 4. Dynamic stiffness of elements other than resistant supports for translatory motion ICS 17.140 A59 National Standards of People's Republic of China Acoustics and Vibration - Vibration - Acoustic Transmission Characteristics of Flexible Elements Laboratory measurement methods Part 4. Flat, non-supported members Acoustics and vibration-Laboratorymeasurementofvibro-acoustictransfer propertiesofresilientelements-Part 4.Dynamicstiffnessofelementsotherthan (ISO 10846-4.2003, IDT) Posted.2017-11-01 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 2 3 Terms and definitions 2 4 principle 4 5 measurement program 5 6 Test Equipment Applicability Guidelines 14 7 test process 19 Evaluation of test results 21 9 record content 23 10 test report 24 Appendix A (Informative) Twist dynamic stiffness of rotating parts 25 References 26

Foreword

GB/T 22159 "acoustic and vibration elastic element vibration - acoustic transmission characteristics of laboratory measurement methods" includes the following five sections. --- Part 1. Principles and Guidelines; --- Part 2. Direct measurement method of flat dynamic stiffness of elastic support; --- Part 3. Indirect measurement of elastic dynamic stiffness of the support member; --- Part 4. Elastic non-supported pieces of flat dynamic stiffness; --- Part 5. Measurement method of driving point of low frequency flat dynamic stiffness of elastic support. This section GB/T 22159 Part 4. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method is equivalent to using ISO 10846-4.2003 "Acoustics and vibration of flexible components vibration - acoustic transmission characteristics of the laboratory test Methods of quantity - Part 4. Flat dynamic stiffness of elastic nonsupport members ". The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows. --- GB/T 2298-2010 Glossary of mechanical vibration, shock and condition monitoring (ISO 2041.2009, IDT); --- GB/T 3240-1982 commonly used in acoustic measurement frequency (neqISO 266.1975); --- GB/T 11349.1-2006 vibration and shock mechanical admittance test to determine Part 1. Basic definitions and sensors (ISO 7626-1.1986, IDT); --- GB/T 11349.2-2006 vibration and shock mechanical admittance test to determine Part 2 with exciters as a single point of flat-wave Measurement of excitation (ISO 7626-2.1990, IDT); Mechanical Installation of Mechanical Vibration and Impact Accelerometers (ISO 5348.1998, IDT); --- GB/T 20485.21-2007 vibration and shock sensor calibration method Part 21. Vibration comparison method calibration (ISO 16063-21.2003, IDT); Acoustics and vibration - Elastics - Laboratory measurement of sound transmission characteristics - Part 1. Method of measurement. Principles and Guidelines (ISO 10846-1.2008, IDT). This section is proposed by the Chinese Academy of Sciences. This part of the National Acoustic Standardization Technical Committee (SAC/TC17) centralized. This section mainly drafted units. Acoustics Institute of Chinese Academy of Sciences, Changzhou Dragon Auto Parts Co., Ltd., Shenzhen Zhongya Electrical Industrial Co., Ltd., Tongji University, Anhui Weiwei glue Group Co., Ltd., Anhui Vocational and Technical College, Beijing City Labor Protection Science Research Zhejiang University, Northwestern Polytechnical University, Shanghai Jiaotong University, Hefei University of Technology, Changsha Aobang Environmental Protection Industry Co., Ltd. The main drafters of this section. Cheng Mingkun, Li Xiaodong, Lv Yadong, Fang Qingchuan, Li Meng, Zhang Jianhua, Yu Wuzhou, Mao Dongxing, Baojun Yao, Zhuang Xiaofeng, Li Jun, Li Bin, Zhang Bin, Li Xiaokuan, Zhai Guoqing, Chen Kean, Jiang Weikang, Li Zhiyuan, Mo Jian Yan, Yin Xuan, Xu Xin.

Introduction

Various passive isolators are widely used to reduce the transmission of vibration, such as suspension of automobile engines, flexible support of buildings, marine machinery Flexible support and flexible coupling and household appliances in the small vibration isolation components. This section specifies the linear elastic non-supporting elements (except elastic support), such as flexible bellows, hoses, couplings, cables and pipe hooks Direct and Dynamic Measurement of Dynamic Transmission Stiffness. This section is elastic components vibration - acoustic characteristics of laboratory measurement methods One of the standards, this series of standards also includes the measurement principle of elastic support and direct measurement method, indirect measurement method and drive point measurement of various ministries Points, ISO 10846-1 provides a comprehensive guide to select the appropriate standard. The laboratory conditions described in this section include the rational use of static preload. This method is suitable for the analysis of structural acoustic transmission losses above 20 Hz for elastic elements. However, this method can not be fully described for failure Vibration damping element to reduce the frequency vibration or shock displacement characteristics. Acoustics and Vibration - Vibration - Acoustic Transmission Characteristics of Flexible Elements Laboratory measurement methods Part 4. Flat, non-supported members

1 Scope

This part of GB/T 22159 details the elastic non-supporting pieces (such as elastic bellows, couplings, power cables, hoses and pipes Hook, see Figure 1) two kinds of measurement methods of dynamic stiffness. No consideration is given here to elements filled with a liquid such as oil or water. Note 1. Pipe hook and compression-type elastic support is different, it is stretch-type, so the test conditions described in this section and GB/T 22159.2 and GB/T 22159.3 different. The flanges of the elastic element are not required to be parallel to each other by this method, as long as the flanges of the components or the jig interface can be flattened. Elastic elements discussed in this section are used to reduce. a) Transmission of the audio range vibration (structure sound of 20Hz ~ 20kHz) to the structure, for example, it causes the structure to radiate unwanted sound Tone (air, water or other sound); b) The transmission of low frequency vibration (usually 1Hz ~ 80Hz), for example, it is too strong, it will make the body feel discomfort, the structure is damaged. In fact, any one test equipment for the size of the specimen are limited, too large or too small are not applicable. This section also includes vertical and parallel translational measurements of the interface with the flange and clamp. Appendix A, contains a rotating composition Measurement guidelines for conveying stiffness. The direct method applies for frequencies ranging from 1 Hz up to an upper limit frequency, which depends on the lowest resonance frequency of the test fixture frame (Typically, the frame resonance frequency of the test device with a side length of 1 m is about 300 Hz). Note 2. In fact, the lower limit frequency depends on the dynamic excitation system. The frequency range to which the indirect method is applicable depends on the test device and the vibration isolation element under test. The lower limit frequency is usually 20Hz ~ 50Hz, the upper limit The frequency is 2kHz ~ 5kHz. The measurement data obtained by this method can be used. --- Product information provided by the manufacturer and supplier; --- To provide information for product development; ---QC; --- Vibration element transmission rate calculation. a) Cable containing connector and clamping device b) Hook Description. 1 --- connector; 2 --- cable; 3 --- fixture; 4 --- fixed device; 5 --- flexible components; 6 --- pipe fixture. Figure 1 Connection or fixture connection The interface is an example of a flat, flexible element ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22159.4-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22159.4-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22159.4-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22159.4-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.