GB/T 22137.1-2008 English PDFUS$654.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22137.1-2008: Valve positioners for use in industrial-process control system -- Part 1: Methods of evaluating the performance of valve positioners with pneumatic outputs Status: Valid
Basic dataStandard ID: GB/T 22137.1-2008 (GB/T22137.1-2008)Description (Translated English): Valve positioners for use in industrial-process control system -- Part 1: Methods of evaluating the performance of valve positioners with pneumatic outputs Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N18 Classification of International Standard: 25.040 Word Count Estimation: 33,344 Date of Issue: 2008-06-30 Date of Implementation: 2009-01-01 Quoted Standard: GB/T 777-2008; GB/T 2423.1-2001; GB/T 2423.2-2001; GB/T 2423.7-1995; GB/T 2423.9-2001; GB/T 2423.10-2008; GB/T 3369.1-2008; GB/T 3369.2-2008; GB 4208-2008; GB/T 4365-2003; GB 4793.1-2007; GB/T 16511-1996; GB/T 16842-2008; GB/T 17212-1998; GB/T 17626.3-2006; GB/T 17626.4-2008; GB/T 17626.5-2008; GB/T 17626.8-2006; GB/T 18271.4-2000 Adopted Standard: IEC 61514-2000, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the test and evaluation of single- or double-acting positioner static and dynamic performance tests. These tests can be used to receive a standard analog input signal and the output pneumatic positioner. As provided in this section is intended for manufacturers evaluation method to determine the performance of their products, as well as a user or an independent test agency verify that the manufacturer 's product performance specification purposes. This section is intended to provide a component locator, role and characteristics provide definitions, to measure the performance of these characteristics influence the amount of error and the impact of regulations unified approach, income for the reporting and measurement data on the assessment results provide a description of the method. Tests specified in this section may not adequately meet the special environmental design of the instrument. However, some series of tests for conditions designed to meet the corresponding limit of the instrument. When the need for full assessment under this section, the relevant part of this section may be required to test and report the test results. In this case, the test report shall state the provisions of this Part which test items are not included. GB/T 22137.1-2008: Valve positioners for use in industrial-process control system -- Part 1: Methods of evaluating the performance of valve positioners with pneumatic outputs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Valve positiongers for use in industrial-process control system Part 1. Methods of evaluating the performance of valve positiongers with pneumatic outputs ICS 25.040 N18 National Standards of People's Republic of China GB/T 22137.1-2008/IEC 61514.2000 Industrial process control systems positioner Part 1. pneumatic positioner output Performance Evaluation Method (IEC 61514.2000, IDT) Posted 2008-06-30 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope and purpose 1 2 Normative references 1 3 Terms and definitions 2 4 5 General test conditions 4.1 Environmental test conditions 5 4.2 Conditions for source 6 5 General test procedures 6 5.1 Test Equipment 6 5.2 Test Method 6 5.3 Test Considerations 6 7 5.4 - Basic test layout 5.5 Initial Setup 8 6 Test procedure 9 6.1 gain characteristics 9 Stroke characteristic 9 6.2 6.3 and accuracy-related test 10 6.4 11 dead 12 6.5 Flow Data 6.6 Effect of influence quantities 14 20 6.7 Input Overload 6.8 Drift 20 21 6.9 Accelerated Life Test Dynamic Response 21 6.10 7 Other matters 25 7.1 Summary 25 25 7.2 Security 7.3 Enclosure rating 25 7.4 document information 25 7.5 Installation 25 7.6 routine maintenance and adjustment 25 7.7 Repair 25 7.8 Protection Processing 25 7.9 Design features 26 7.10 variable 26 Tools and equipment 26 7.11 8 26 test reports and documentation GB/T 22137.1-2008/IEC 61514.2000ForewordGB/T 22137 "industrial process control systems positioner" is divided into two parts. --- Part 1. pneumatic positioner output performance evaluation method; --- Part 2. intelligent valve positioners with pneumatic outputs performance evaluation method. This section GB/T Part of 122,137. This section identical with IEC 61514.2000 "industrial process control systems pneumatic positioner output performance evaluation method" (English Version). For ease of use, according to GB/T 1.1-2000 "Standardization Guide Part 1. Structure and rules are written standard" for IEC 61514.2000 made the following editorial changes. a) it Removes the IEC 61514.2000 Foreword; b) Where "IEC 61514" where to "GB/T 22137.1"; c) "This standard" to "this Part"; "." D) with a decimal point instead of a comma as the decimal point, ""; e) the standard name from "industrial process control systems pneumatic positioner output performance evaluation method" to "industrial process control system Pneumatic positioner output performance evaluation method ". Part 1 positioner system used. This part is proposed by China Machinery Industry Federation. This part of the measurement and control of Standardization Technical Committee first points by the National Technical Committee of industrial processes. This section is drafted. Southwest University, China Silian Instrument Group, Shanghai Industrial Automation Instrument Research Institute, the machinery industry instrument instrument Table Technology and Economy Institute. Drafters of this section. Zhou Xuelian, Huang Renjie, Pandong Bo, Liu Jin, Fan Kai, Feng Xiao liters. This section first release. GB/T 22137.1-2008/IEC 61514.2000 Industrial process control systems positioner Part 1. pneumatic positioner output Performance Evaluation Method1 Scope and purposeThis section provides test and evaluation of test single or double acting positioners static and dynamic performance. These tests may be used to receive Standard analog input signal (according to GB/T 3369.1, GB/T 3369.2 and GB/T 777 provisions) and a pneumatic positioner output. Note. For pulse or digital input signal locator, you may need other appropriate criteria. The method described in this standard may be insufficient to meet with digital Locator or a pulse output of the locator application control. During the test, the positioner can be run separately and not attached to the actuator can also be installed to connect to a specific actuator as a member run. This part requires a different way of running the place made special note. Evaluation method specified in this section is intended for the manufacturer to determine the performance of their products, as well as users or independent testing agency to verify students Specification only produce vendor performance. We should maintain close links between assessment bodies and manufacturers. In determining test procedures, it should pay attention to the meter manufacturer's specifications, And should seek the advice of the manufacturer test procedures and test results. Any test report issued by the manufacturer of the test should be included The results of the observations. This section is intended to provide a locator assembly, the role and characteristics provide definitions; measurement error performance and affect the amount of these characteristics Movies Ring to establish uniform methods; provide a description for the report and the resulting measurement data evaluation result of the method. Test conditions described in this section, such as the ambient temperature range and supply sources, etc., on behalf of the conditions usually arise. Thus, in When the manufacturer or the user does not specify other values, the value specified in this part should be used. If you use other values, it should be described. should Recognized throughout the assessment process should be carried out according to the manufacturer's installation and operating instructions and specifications. Tests prescribed in this section is not necessarily sufficient to meet the special environmental design of the instrument. But part of the series of tests apply to comply with the appropriate limit System conditions designed instrument. When all the parts need to press this assessment, according to the relevant part of this section will be required to test and report test results. in In this case, the test report shall state the provisions of this Part of the test items which are not included.2 Normative referencesThe following documents contain provisions which, through reference GB/T 22137 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 777-2008 Industrial Automation Instrumentation Analogue pneumatic signal (IEC 60382.1991, IDT) GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (idt IEC 68- 2-1.1990) GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2. Test methods Test B. high temperature (idt IEC 60068-2-2. 1974) GB/T 2423.7-1995 Environmental testing for electric and electronic products Part II. Test Ec and guidance. Drop and turn Down (Primarily for equipment - type specimens) (idt IEC 68-2-31. 1982) GB/T 2423.9-2001 Environmental testing for electric and electronic products Part 2. Test methods Test Cb. Damp heat, equipment GB/T 22137.1-2008/IEC 61514.2000 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22137.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22137.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22137.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22137.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
